#19689: 5 GHz not working on WDR3600
--------------------+------------------------
Reporter: cyablo | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: kernel | Version: Trunk
Keywords: |
--------------------+------------------------
Hello,
im using two TP-Link WDR3600 with identical configuration as dump AP's.
Both have configured two VLAN seperated WIFi's on 2,4 GHz & 5 GHz each.
Now i updated to the latest trunk version r45695 after running an earlier
trunk for weeks. I noticed that my 5 Ghz WiFi's are now not coming up
again on BOTH devices. Config seems fine, nothing has changed.
Luci shows the WiFi's changes mode between unknown and master on start and
end up as mode client, but are configured as Access Point.
Here is my System-Log: http://pastebin.com/k26qi7fV
There is a "Interface initialization failed" Error for wlan1 (5 GHz)
/etc/config/wireless : http://pastebin.com/81WbrNVW
iwinfo shows:
{{{
wlan1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Client Channel: unknown (unknown)
Tx-Power: 15 dBm Link Quality: unknown/70
Signal: unknown Noise: -91 dBm
Bit Rate: unknown
Encryption: unknown
Type: nl80211 HW Mode(s): 802.11an
Hardware: 168C:0033 168C:A120 [Atheros AR9580]
TX power offset: none
Frequency offset: none
Supports VAPs: yes PHY name: phy1
}}}
I dont see the Problem here. I managed to get it working again once by
messing with the Interface Modes Monitor, Client and back to Master,
enabling, disabling them but after a reboot, they dont come up again.
--
Ticket URL: <https://dev.openwrt.org/ticket/19689>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
