#20382: b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Buffalo WXR-1900DHP)
-----------------------+----------------------------------
 Reporter:  anonymous  |      Owner:  developers
     Type:  defect     |     Status:  new
 Priority:  normal     |  Milestone:  Chaos Calmer (trunk)
Component:  packages   |    Version:  Trunk
 Keywords:             |
-----------------------+----------------------------------
 b43 driver is not working using r46705.
 Please see the following dmesg.
 Thanks.

 {{{
 [    0.000000] Booting Linux on physical CPU 0x0
 [    0.000000] Linux version 3.18.20 (root@vmu1404x) (gcc version 4.8.3
 (OpenWrt/Linaro GCC 4.8-2014.04 r46705) ) #1 SMP Sun Aug 23 04:37:18 JST
 2015
 [    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7),
 cr=10c5387d
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
 instruction cache
 [    0.000000] Machine model: Buffalo WXR-1900DHP
 [    0.000000] bootconsole [earlycon0] enabled
 [    0.000000] Memory policy: Data cache writealloc
 [    0.000000] PERCPU: Embedded 9 pages/cpu @c6bd4000 s5952 r8192 d22720
 u36864
 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
 Total pages: 130816
 [    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk
 [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
 [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
 bytes)
 [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
 bytes)
 [    0.000000] Memory: 515828K/524288K available (2762K kernel code, 101K
 rwdata, 760K rodata, 172K init, 271K bss, 8460K reserved, 393216K highmem)
 [    0.000000] Virtual kernel memory layout:
 [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
 [    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
 [    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
 [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
 [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
 [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
 [    0.000000]       .text : 0xc0008000 - 0xc0378dc4   (3524 kB)
 [    0.000000]       .init : 0xc0379000 - 0xc03a4000   ( 172 kB)
 [    0.000000]       .data : 0xc03a4000 - 0xc03bd768   ( 102 kB)
 [    0.000000]        .bss : 0xc03bd768 - 0xc040147c   ( 272 kB)
 [    0.000000] Hierarchical RCU implementation.
 [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
 nr_cpu_ids=2
 [    0.000000] NR_IRQS:16 nr_irqs:16 16
 [    0.000000] L2C: platform modifies aux control register: 0x0a130000 ->
 0x7a530001
 [    0.000000] L2C: platform provided aux values permit register
 corruption.
 [    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000
 -> 0x7a530001
 [    0.000000] L2C-310 erratum 769419 enabled
 [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
 [    0.000000] L2C-310: enabling full line of zeros but not enabled in
 Cortex-A9
 [    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
 [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
 [    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
 [    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
 [    0.000013] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every
 2199023255552ns
 [    0.008351] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
 [    0.071076] pid_max: default: 32768 minimum: 301
 [    0.075909] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 [    0.082635] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
 bytes)
 [    0.090190] CPU: Testing write buffer coherency: ok
 [    0.095368] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 [    0.101252] Setting up static identity map for 0x11a10 - 0x11a44
 [    0.108954] CPU1: Booted secondary processor
 [    0.168222] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 [    0.168291] Brought up 2 CPUs
 [    0.181479] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
 [    0.187935] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
 (primary CPU mode 0x13)
 [    0.196477] CPU: This may indicate a broken bootloader or firmware.
 [    0.208829] NET: Registered protocol family 16
 [    0.213983] DMA: preallocated 256 KiB pool for atomic coherent
 allocations
 [    0.260029] Switched to clocksource arm_global_timer
 [    0.266089] NET: Registered protocol family 2
 [    0.271104] TCP established hash table entries: 1024 (order: 0, 4096
 bytes)
 [    0.278181] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
 [    0.284667] TCP: Hash tables configured (established 1024 bind 1024)
 [    0.291175] TCP: reno registered
 [    0.294504] UDP hash table entries: 256 (order: 1, 8192 bytes)
 [    0.300464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 [    0.307025] NET: Registered protocol family 1
 [    0.312323] futex hash table entries: 512 (order: 3, 32768 bytes)
 [    0.319426] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 [    0.325367] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
 (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 [    0.335417] msgmni has been set to 239
 [    0.339705] bounce: pool size: 64 pages
 [    0.343647] io scheduler noop registered
 [    0.347666] io scheduler deadline registered (default)
 [    0.353186] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 [    0.360200] console [ttyS0] disabled
 [    0.363907] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117,
 base_baud = 7812500) is a 16550
 [    0.372924] console [ttyS0] enabled
 [    0.372924] console [ttyS0] enabled
 [    0.380004] bootconsole [earlycon0] disabled
 [    0.380004] bootconsole [earlycon0] disabled
 [    0.389813] libphy: Fixed MDIO Bus: probed
 [    0.393973] bgmac: Broadcom 47xx GBit MAC driver loaded
 [    0.399414] bcma: bus0: Found chip with id 53010, rev 0x00 and package
 0x00
 [    0.406450] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id
 0x800, rev 0x2A, class 0x0)
 [    0.415087] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id
 0x50B, rev 0x01, class 0x0)
 [    0.423887] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev
 0x01, class 0x0)
 [    0.431892] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D,
 rev 0x05, class 0x0)
 [    0.440326] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D,
 rev 0x05, class 0x0)
 [    0.448757] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D,
 rev 0x05, class 0x0)
 [    0.457177] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D,
 rev 0x05, class 0x0)
 [    0.465587] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id
 0x501, rev 0x01, class 0x0)
 [    0.474179] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id
 0x501, rev 0x01, class 0x0)
 [    0.482772] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id
 0x501, rev 0x01, class 0x0)
 [    0.491389] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost)
 (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
 [    0.501466] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504,
 rev 0x01, class 0x0)
 [    0.509890] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505,
 rev 0x01, class 0x0)
 [    0.518335] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503,
 rev 0x01, class 0x0)
 [    0.526595] bcma: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev
 0x03, class 0x0)
 [    0.534695] bcma: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF,
 id 0x506, rev 0x01, class 0x0)
 [    0.544107] bcma: bus0: Core 16 found: Denali DDR2/DDR3 memory
 controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
 [    0.554899] bcma: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev
 0x01, class 0x0)
 [    0.562984] bcma: bus0: Core 18 found: NAND flash controller (manuf
 0x4BF, id 0x509, rev 0x01, class 0x0)
 [    0.572649] bcma: bus0: Core 19 found: SPI flash controller (manuf
 0x4BF, id 0x50A, rev 0x01, class 0x0)
 [    0.598223] bcm_nand bcma0:18: NAND Controller rev 6.01
 [    0.628253] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
 [    0.634625] nand: Macronix NAND 128MiB 3,3V 8-bit
 [    0.639354] nand: 128MiB, SLC, page size: 2048, OOB size: 64
 [    1.629267] random: nonblocking pool is initialized
 [    1.791390] 3 bcm47xxpart partitions found on MTD device bcm_nand
 [    1.797498] Creating 3 MTD partitions on "bcm_nand":
 [    1.802488] 0x000003000000-0x000008000000 : "firmware"
 [    1.954503] 0x00000300001c-0x000003400000 : "linux"
 [    1.967318] 0x000003400000-0x000008000000 : "ubi"
 [    2.112054] bcm53xxspiflash spi32766.0: mx25l4005a (512 Kbytes)
 [    2.134805] 3 bcm47xxpart partitions found on MTD device spi32766.0
 [    2.141096] Creating 3 MTD partitions on "spi32766.0":
 [    2.146245] 0x000000000000-0x000000060000 : "boot"
 [    2.151633] 0x000000060000-0x000000070000 : "nvram"
 [    2.157060] 0x000000070000-0x000000080000 : "nvram"
 [    2.286682] bgmac bcma0:3: Found PHY addr: 30 (NOREGS)
 [    2.292497] bgmac bcma0:3: Support for Roboswitch not implemented
 [    2.300105] b53_common: found switch: BCM53012, rev 5
 [    2.305762] bgmac bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
 [    2.311662] bgmac bcma0:4: Using random MAC: ca:f9:c2:27:ce:f4
 [    2.317557] bgmac bcma0:4: Found PHY addr: 0
 [    2.323500] bgmac: Timeout waiting for reg 0x180
 [    2.328133] bgmac bcma0:4: Writing to PHY 0 register 0x0 failed
 [    2.335197] bgmac: Timeout waiting for reg 0x180
 [    2.339836] bgmac bcma0:4: Reading PHY 0 register 0x0 failed
 [    2.345510] bgmac bcma0:4: PHY reset failed
 [    2.349711] bgmac bcma0:4: Support for Roboswitch not implemented
 [    2.356694] bgmac bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
 [    2.362589] bgmac bcma0:5: Using random MAC: f6:86:31:b8:12:7e
 [    2.368486] bgmac bcma0:5: Found PHY addr: 0
 [    2.374418] bgmac: Timeout waiting for reg 0x180
 [    2.379068] bgmac bcma0:5: Writing to PHY 0 register 0x0 failed
 [    2.386122] bgmac: Timeout waiting for reg 0x180
 [    2.390760] bgmac bcma0:5: Reading PHY 0 register 0x0 failed
 [    2.396429] bgmac bcma0:5: PHY reset failed
 [    2.400628] bgmac bcma0:5: Support for Roboswitch not implemented
 [    2.407588] bgmac: Unsupported core_unit 3
 [    2.411734] bgmac: probe of bcma0:6 failed with error -524
 [    2.417321] pci_host_bcm5301x bcma0:7: initializing PCIe controller
 [    2.699012] pci_host_bcm5301x bcma0:7: link: UP
 [    2.703662] pci_host_bcm5301x bcma0:7: PCI host bridge to bus 0000:00
 [    2.710138] pci_bus 0000:00: root bus resource [mem
 0x08000000-0x0fffffff]
 [    2.717034] pci_bus 0000:00: root bus resource [io  0x0000]
 [    2.722628] pci_bus 0000:00: No busn resource found for root bus, will
 use [bus 00-ff]
 [    2.730808] PCI: bus0: Fast back to back transfers disabled
 [    2.736791] PCI: bus1: Fast back to back transfers disabled
 [    2.742503] pci 0000:00:00.0: BAR 8: assigned [mem
 0x08000000-0x080fffff]
 [    2.749322] pci 0000:01:00.0: BAR 0: assigned [mem
 0x08000000-0x08007fff 64bit]
 [    2.756663] pci 0000:00:00.0: PCI bridge to [bus 01]
 [    2.761652] pci 0000:00:00.0:   bridge window [mem
 0x08000000-0x080fffff]
 [    2.768600] pci_host_bcm5301x bcma0:8: initializing PCIe controller
 [    3.049015] pci_host_bcm5301x bcma0:8: link: UP
 [    3.053670] pci_host_bcm5301x bcma0:8: PCI host bridge to bus 0001:00
 [    3.060145] pci_bus 0001:00: root bus resource [mem
 0x40000000-0x47ffffff]
 [    3.067039] pci_bus 0001:00: root bus resource [io  0x0000]
 [    3.072633] pci_bus 0001:00: No busn resource found for root bus, will
 use [bus 00-ff]
 [    3.080808] PCI: bus0: Fast back to back transfers disabled
 [    3.086781] PCI: bus1: Fast back to back transfers disabled
 [    3.092527] pci 0001:00:00.0: BAR 8: assigned [mem
 0x40000000-0x400fffff]
 [    3.099343] pci 0001:01:00.0: BAR 0: assigned [mem
 0x40000000-0x40007fff 64bit]
 [    3.106679] pci 0001:00:00.0: PCI bridge to [bus 01]
 [    3.111665] pci 0001:00:00.0:   bridge window [mem
 0x40000000-0x400fffff]
 [    3.118612] pci_host_bcm5301x bcma0:9: initializing PCIe controller
 [    3.509008] pci_host_bcm5301x bcma0:9: link: DOWN
 [    3.514716] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled
 (30 seconds, Software Timer)
 [    3.523733] bcma: bus0: Bus registered
 [    3.527600] bcma-pci-bridge 0000:01:00.0: enabling device (0140 ->
 0142)
 [    3.534380] bcma: bus1: Found chip with id 0x4360, rev 0x03 and package
 0x01
 [    3.541483] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id
 0x800, rev 0x2B, class 0x0)
 [    3.550050] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
 0x812, rev 0x2A, class 0x0)
 [    3.558705] bcma: bus1: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E,
 rev 0x02, class 0x0)
 [    3.567014] bcma: bus1: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C,
 rev 0x01, class 0x0)
 [    3.575489] bcma: bus1: Core 4 found: USB 2.0 Device (manuf 0x4BF, id
 0x81A, rev 0x11, class 0x0)
 [    3.615850] bcma: bus1: Invalid SPROM read from the PCIe card, trying
 to use fallback SPROM
 [    3.640781] bcma: bus1: Bus registered
 [    3.644597] bcma-pci-bridge 0001:01:00.0: enabling device (0140 ->
 0142)
 [    3.651362] bcma: bus2: Found chip with id 0x4360, rev 0x03 and package
 0x01
 [    3.658454] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id
 0x800, rev 0x2B, class 0x0)
 [    3.667015] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
 0x812, rev 0x2A, class 0x0)
 [    3.675681] bcma: bus2: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E,
 rev 0x02, class 0x0)
 [    3.683994] bcma: bus2: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C,
 rev 0x01, class 0x0)
 [    3.692471] bcma: bus2: Core 4 found: USB 2.0 Device (manuf 0x4BF, id
 0x81A, rev 0x11, class 0x0)
 [    3.732838] bcma: bus2: Invalid SPROM read from the PCIe card, trying
 to use fallback SPROM
 [    3.757911] bcma: bus2: Bus registered
 [    3.761993] TCP: cubic registered
 [    3.765323] NET: Registered protocol family 17
 [    3.769866] bridge: automatic filtering via arp/ip/ip6tables has been
 deprecated. Update your scripts to load br_netfilter if you need this.
 [    3.782520] 8021q: 802.1Q VLAN Support v1.8
 [    3.786782] Registering SWP/SWPB emulation handler
 [    3.793531] UBI: auto-attach mtd2
 [    3.796862] UBI: attaching mtd2 to ubi0
 [    4.323196] UBI: scanning is finished
 [    4.358153] UBI: volume 1 ("rootfs_data") re-sized from 9 to 551 LEBs
 [    4.365063] UBI: attached mtd2 (name "ubi", size 76 MiB) to ubi0
 [    4.371110] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976
 bytes
 [    4.377911] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size
 2048
 [    4.384641] UBI: VID header offset: 2048 (aligned 2048), data offset:
 4096
 [    4.391538] UBI: good PEBs: 608, bad PEBs: 0, corrupted PEBs: 0
 [    4.397468] UBI: user volume: 2, internal volumes: 1, max. volumes
 count: 128
 [    4.404621] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image
 sequence number: 618700809
 [    4.413602] UBI: available PEBs: 0, total reserved PEBs: 608, PEBs
 reserved for bad PEB handling: 20
 [    4.422792] UBI: background thread "ubi_bgt0d" started, PID 242
 [    4.429671] UBI: ubiblock0_0 created from ubi0:0(rootfs)
 [    4.435011] ubiblock: device ubiblock0_0 (rootfs) set to be root
 filesystem
 [    4.449759] VFS: Mounted root (squashfs filesystem) readonly on device
 254:0.
 [    4.457105] Freeing unused kernel memory: 172K (c0379000 - c03a4000)
 [    5.420484] External imprecise Data abort at addr=0xb6fe32c4,
 fsr=0x1c06 ignored.
 [    5.655495] init: Console is alive
 [    5.659111] init: - watchdog -
 [    6.304628] usbcore: registered new interface driver usbfs
 [    6.310233] usbcore: registered new interface driver hub
 [    6.315633] usbcore: registered new device driver usb
 [    6.678359] init: - preinit -
 [    8.299035] eth0: Link is Up - 1Gbps/Full - flow control off
 [   10.287358] mount_root: loading kmods from internal overlay
 [   10.674910] UBIFS: default file-system created
 [   10.680762] UBIFS: background thread "ubifs_bgt0_1" started, PID 327
 [   10.802497] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
 [   10.808987] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit
 sizes: 2048 bytes/2048 bytes
 [   10.818143] UBIFS: FS size: 68694016 bytes (65 MiB, 541 LEBs), journal
 size 3428352 bytes (3 MiB, 27 LEBs)
 [   10.827826] UBIFS: reserved for root: 3244587 bytes (3168 KiB)
 [   10.833679] UBIFS: media format: w4/r0 (latest is w4/r0), UUID
 F6536208-3BD0-4F04-8E48-1439D2B82080, small LPT model
 [   10.845642] block: attempting to load
 /tmp/ubifs_cfg/upper/etc/config/fstab
 [   10.852742] block: unable to load configuration (fstab: Entry not
 found)
 [   10.859536] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
 [   10.866053] block: unable to load configuration (fstab: Entry not
 found)
 [   10.872814] block: attempting to load /etc/config/fstab
 [   10.878140] block: unable to load configuration (fstab: Entry not
 found)
 [   10.884900] block: no usable configuration
 [   10.921518] UBIFS: un-mount UBI device 0, volume 1
 [   10.926338] UBIFS: background thread "ubifs_bgt0_1" stops
 [   10.937054] UBIFS: background thread "ubifs_bgt0_1" started, PID 330
 [   11.058314] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
 [   11.064798] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit
 sizes: 2048 bytes/2048 bytes
 [   11.073959] UBIFS: FS size: 68694016 bytes (65 MiB, 541 LEBs), journal
 size 3428352 bytes (3 MiB, 27 LEBs)
 [   11.083634] UBIFS: reserved for root: 3244587 bytes (3168 KiB)
 [   11.089487] UBIFS: media format: w4/r0 (latest is w4/r0), UUID
 F6536208-3BD0-4F04-8E48-1439D2B82080, small LPT model
 [   11.452516] block: attempting to load
 /tmp/ubifs_cfg/upper/etc/config/fstab
 [   11.459656] block: unable to load configuration (fstab: Entry not
 found)
 [   11.466415] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
 [   11.472976] block: unable to load configuration (fstab: Entry not
 found)
 [   11.479795] block: attempting to load /etc/config/fstab
 [   11.485079] block: unable to load configuration (fstab: Entry not
 found)
 [   11.491851] block: no usable configuration
 [   11.519424] mount_root: overlay filesystem has not been fully
 initialized yet
 [   11.526940] mount_root: switching to jffs2 overlay
 [   11.544724] procd: - early -
 [   11.547672] procd: - watchdog -
 [   12.238400] procd: - ubus -
 [   13.269581] procd: - init -
 [   15.067804] NET: Registered protocol family 10
 [   15.075342] ip6_tables: (C) 2000-2006 Netfilter Core Team
 [   15.086960] Loading modules backported from Linux version
 master-2015-07-21-0-g47cd203
 [   15.094921] Backport generated by backports.git
 backports-20150626-0-gc1a4168
 [   15.103398] ip_tables: (C) 2000-2006 Netfilter Core Team
 [   15.111023] lib80211: common routines for IEEE802.11 drivers
 [   15.120885] nf_conntrack version 0.5.0 (8062 buckets, 32248 max)
 [   15.198792] xt_time: kernel timezone is -0000
 [   15.209186] cfg80211: World regulatory domain updated:
 [   15.214372] cfg80211:  DFS Master region: unset
 [   15.218752] cfg80211:   (start_freq - end_freq @ bandwidth),
 (max_antenna_gain, max_eirp), (dfs_cac_time)
 [   15.228559] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
 2000 mBm), (N/A)
 [   15.236592] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
 2000 mBm), (N/A)
 [   15.244629] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
 2000 mBm), (N/A)
 [   15.252668] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
 KHz AUTO), (N/A, 2000 mBm), (N/A)
 [   15.262175] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
 KHz AUTO), (N/A, 2000 mBm), (0 s)
 [   15.271678] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
 2000 mBm), (0 s)
 [   15.279789] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
 2000 mBm), (N/A)
 [   15.287811] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
 (N/A, 0 mBm), (N/A)
 [   15.310353] PPP generic driver version 2.4.2
 [   15.315609] NET: Registered protocol family 24
 [   15.331679] b43-phy0: Broadcom 4360 WLAN found (core revision 42)
 [   15.348256] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11
 (AC), Revision 1)
 [   15.356309] b43: probe of bcma1:1 failed with error -95
 [   15.361619] b43-phy1: Broadcom 4360 WLAN found (core revision 42)
 [   15.378218] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11
 (AC), Revision 1)
 [   15.386257] b43: probe of bcma2:1 failed with error -95
 [   15.391583] Broadcom 43xx driver loaded [ Features: NL ]
 [   15.401977] usbcore: registered new interface driver brcmfmac
 [   19.264213] device eth0.1 entered promiscuous mode
 [   19.269064] device eth0 entered promiscuous mode
 [   19.281871] br-lan: port 1(eth0.1) entered forwarding state
 [   19.287492] br-lan: port 1(eth0.1) entered forwarding state
 [   19.299140] eth0: Link is Up - 1Gbps/Full - flow control off
 [   21.279016] br-lan: port 1(eth0.1) entered forwarding state
 }}}

--
Ticket URL: <https://dev.openwrt.org/ticket/20382>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to