#20573: Pandaboard ES wifi wl12xx
------------------------+------------------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: kernel | Version: Trunk
Resolution: | Keywords: Pandaboard omap4 wifi wl12xx
------------------------+------------------------------------------
Comment (by anonymous):
Thanks, but i apply path but no change.
[ 9.317718] wl1271_sdio: probe of mmc1:0001:2 failed with error -61
[ 1.611907] twl6040 0-004b: clk32k is not handled!!?
{{{
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: TI OMAP4 PandaBoard-ES
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 261888
[ 0.000000] free_area_init_node: node 0, pgdat c05ac340, node_mem_map
eeff9000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 526 pages used for memmap
[ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] L2C: platform modifies aux control register: 0x0e070000 ->
0x3e470000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000
-> 0x3e470000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] OMAP L2C310: ROM does not support power control setting
[ 0.000000] L2C-310 dynamic clock gating disabled, standby mode
disabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000
[ 0.000000] PERCPU: Embedded 9 pages/cpu @eefb1000 s7296 r8192 d21376
u36864
[ 0.000000] pcpu-alloc: s7296 r8192 d21376 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 260368
[ 0.000000] Kernel command line: console=ttyO2,115200n8
root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1031876K/1047552K available (4211K kernel code,
316K rwdata, 1240K rodata, 300K init, 245K bss, 15676K reserved, 269312K
highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc055af0c (5452 kB)
.init : 0xc055b000 - 0xc05a6000 ( 300 kB)
.data : 0xc05a6000 - 0xc05f5388 ( 317 kB)
.bss : 0xc05f5388 - 0xc0632a58 ( 246 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ti_dt_clocks_register: failed to lookup clock node
bandgap_fclk
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
every 65536000000000ns
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000976] Console: colour dummy device 80x30
[ 0.001007] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776)
[ 0.090209] pid_max: default: 32768 minimum: 301
[ 0.090393] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090423] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.090911] CPU: Testing write buffer coherency: ok
[ 0.091156] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091217] Setting up static identity map for 0x80013b78 - 0x80013bd0
[ 0.092590] CPU1: Booted secondary processor
[ 0.180206] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.180267] Brought up 2 CPUs
[ 0.180297] SMP: Total of 2 processors activated (2795.11 BogoMIPS).
[ 0.180297] CPU: All CPU(s) started in SVC mode.
[ 0.183837] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 4
[ 0.185363] omap_hwmod: l3_main_3 using broken dt data from ocp
[ 0.186706] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.278076] pinctrl core: initialized pinctrl subsystem
[ 0.278442] regulator-dummy: no parameters
[ 0.294250] NET: Registered protocol family 16
[ 0.295043] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.320190] cpuidle: using governor ladder
[ 0.340179] cpuidle: using governor menu
[ 0.343994] OMAP GPIO hardware version 0.1
[ 0.346801] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.347198] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.347442] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.347717] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.355926] platform 4b501000.aes: Cannot lookup hwmod 'aes'
[ 0.356140] platform 480a5000.des: Cannot lookup hwmod 'des'
[ 0.361083] OMAP DMA hardware revision 0.0
[ 0.406005] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine
driver
[ 0.480194] hsusb1_vbus: 3300 mV
[ 0.480346] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for
node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe
[ 0.480377] platform wl12xx_vmmc: Driver reg-fixed-voltage requests
probe deferral
[ 0.483551] omap_i2c 48070000.i2c: could not find pctldev for node
/ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.483551] platform 48070000.i2c: Driver omap_i2c requests probe
deferral
[ 0.483612] omap_i2c 48072000.i2c: could not find pctldev for node
/ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.483612] platform 48072000.i2c: Driver omap_i2c requests probe
deferral
[ 0.483642] omap_i2c 48060000.i2c: could not find pctldev for node
/ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.483673] platform 48060000.i2c: Driver omap_i2c requests probe
deferral
[ 0.483703] omap_i2c 48350000.i2c: could not find pctldev for node
/ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.483703] platform 48350000.i2c: Driver omap_i2c requests probe
deferral
[ 0.483978] pps_core: LinuxPPS API ver. 1 registered
[ 0.483978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.484008] PTP clock support registered
[ 0.484741] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
[ 0.484985] Advanced Linux Sound Architecture Driver Initialized.
[ 0.485748] Switched to clocksource 32k_counter
[ 0.493469] NET: Registered protocol family 2
[ 0.494110] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.494201] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.494323] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.494415] TCP: reno registered
[ 0.494415] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.494476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.494689] NET: Registered protocol family 1
[ 0.498107] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.499481] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.499511] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.499786] msgmni has been set to 1489
[ 0.500610] bounce: pool size: 64 pages
[ 0.500610] io scheduler noop registered
[ 0.500640] io scheduler deadline registered (default)
[ 0.502014] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040
size 406
[ 0.502227] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size
56
[ 0.503997] OMAP DSS rev 4.0
[ 0.506958] omapfb omapfb: no displays
[ 0.507080] omapfb omapfb: failed to setup omapfb
[ 0.507110] platform omapfb: Driver omapfb requests probe deferral
[ 0.507690] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.509094] omap_uart 4806a000.serial: no wakeirq for uart0
[ 0.509216] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104,
base_baud = 3000000) is a OMAP UART0
[ 0.509643] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105,
base_baud = 3000000) is a OMAP UART1
[ 0.510040] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106,
base_baud = 3000000) is a OMAP UART2
[ 1.252410] console [ttyO2] enabled
[ 1.256500] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102,
base_baud = 3000000) is a OMAP UART3
[ 1.270690] i2c /dev entries driver
[ 1.275268] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 1.283477] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517
[ 1.290374] platform 4809c000.mmc: Driver omap_hsmmc requests probe
deferral
[ 1.298034] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517
[ 1.304901] platform 480d5000.mmc: Driver omap_hsmmc requests probe
deferral
[ 1.313598] emif 4c000000.emif: emif_probe: device configured with addr
= f00e6000 and IRQ142
[ 1.322784] emif 4d000000.emif: emif_probe: device configured with addr
= f00ec000 and IRQ143
[ 1.334686] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not
registered
[ 1.342559] omap-abe-twl6040 sound: snd_soc_register_card() failed:
-517
[ 1.349609] platform sound: Driver omap-abe-twl6040 requests probe
deferral
[ 1.357543] TCP: cubic registered
[ 1.361114] NET: Registered protocol family 10
[ 1.366638] NET: Registered protocol family 17
[ 1.371337] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.384552] 8021q: 802.1Q VLAN Support v1.8
[ 1.389068] twl: not initialized
[ 1.392456] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.400817] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.409210] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.417602] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.425994] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.434356] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1375000 Vs max 1316660
[ 1.442749] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for
1410000 Vs max 1316660
[ 1.451141] omap2_set_init_voltage: unable to find boot up OPP for
vdd_mpu
[ 1.458343] omap2_set_init_voltage: unable to set vdd_mpu
[ 1.463989] omap2_set_init_voltage: unable to find boot up OPP for
vdd_core
[ 1.471282] omap2_set_init_voltage: unable to set vdd_core
[ 1.477050] omap2_set_init_voltage: unable to find boot up OPP for
vdd_iva
[ 1.484222] omap2_set_init_voltage: unable to set vdd_iva
[ 1.490173] Power Management for TI OMAP4+ devices.
[ 1.495269] OMAP4 PM: u-boot >= v2012.07 is required for full PM
support
[ 1.502410] Registering SWP/SWPB emulation handler
[ 1.508789] vwl1271: 1800 mV
[ 1.513122] Skipping twl internal clock init and using bootloader value
(unknown osc rate)
[ 1.523132] twl 0-0048: PIH (irq 39) nested IRQs
[ 1.528717] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[ 1.536224] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 1.544830] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered
48070000.i2c:twl@48 as rtc0
[ 1.554504] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 1.560699] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 1.566955] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 1.573150] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 1.578765] VPP: 1800 <--> 2500 mV at 1900 mV
[ 1.584350] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 1.589630] VDAC: 1800 mV
[ 1.593231] VANA: 2100 mV
[ 1.596923] VCXIO: 1800 mV
[ 1.600341] VUSB: 3300 mV
[ 1.603973] V1V8: 1800 mV
[ 1.607635] V2V1: 2100 mV
[ 1.611907] twl6040 0-004b: clk32k is not handled!!?
[ 1.619628] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.626129] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[ 1.632934] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[ 1.639404] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[ 1.645782] omapfb omapfb: no displays
[ 1.645782] omapfb omapfb: failed to setup omapfb
[ 1.645782] platform omapfb: Driver omapfb requests probe deferral
[ 1.832550] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm
mapping ok
[ 1.845062] omapfb omapfb: no displays
[ 1.849060] omapfb omapfb: failed to setup omapfb
[ 1.849060] platform omapfb: Driver omapfb requests probe deferral
[ 1.862945] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to
2000-01-01 00:00:00 UTC (946684800)
[ 1.886688] VUSB: disabling
[ 1.890136] VANA: disabling
[ 1.893493] VDAC: disabling
[ 1.898315] ALSA device list:
[ 1.901794] #0: PandaBoardES
[ 1.906005] Waiting for root device /dev/mmcblk0p2...
[ 1.919647] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 1.930206] mmc0: new high speed SDHC card at address 210c
[ 1.936950] mmcblk0: mmc0:210c SD08G 7.42 GiB
[ 1.943267] mmcblk0: p1 p2
[ 1.947937] omapfb omapfb: no displays
[ 1.951599] omap_hsmmc 480d5000.mmc: card claims to support voltages
below defined range
[ 1.960815] omapfb omapfb: failed to setup omapfb
[ 1.961822] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 1.962829] mmc1: new SDIO card at address 0001
[ 1.976318] platform omapfb: Driver omapfb requests probe deferral
[ 2.270019] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.270019] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.285675] Freeing unused kernel memory: 300K (c055b000 - c05a6000)
[ 2.388061] init: Console is alive
[ 2.393371] init: - watchdog -
[ 2.549285] usbcore: registered new interface driver usbfs
[ 2.555419] usbcore: registered new interface driver hub
[ 2.561157] usbcore: registered new device driver usb
[ 2.570617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.578308] ehci-platform: EHCI generic platform driver
[ 3.399566] init: - preinit -
[ 6.522521] mount_root: mounting /dev/root
[ 6.528198] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.541931] procd: - early -
[ 6.541931] procd: - watchdog -
[ 7.327056] procd: - ubus -
[ 8.332000] random: ubusd urandom read with 21 bits of entropy
available
[ 8.343963] procd: - init -
[ 9.034851] ehci-omap: OMAP-EHCI Host Controller driver
[ 9.035797] ehci-omap 4a064c00.ehci: Can't get PHY device for port 0:
-517
[ 9.045898] platform 4a064c00.ehci: Driver ehci-omap requests probe
deferral
[ 9.061218] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.075286] omapfb omapfb: no displays
[ 9.079711] omapfb omapfb: failed to setup omapfb
[ 9.084686] platform omapfb: Driver omapfb requests probe deferral
[ 9.105987] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 9.111816] ehci-omap 4a064c00.ehci: new USB bus registered, assigned
bus number 1
[ 9.119964] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 9.135528] Loading modules backported from Linux version
master-2015-07-21-0-g47cd203
[ 9.143920] Backport generated by backports.git
backports-20150626-0-gc1a4168
[ 9.147705] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 9.148834] hub 1-0:1.0: USB hub found
[ 9.149139] hub 1-0:1.0: 3 ports detected
[ 9.150604] omapfb omapfb: no displays
[ 9.150604] omapfb omapfb: failed to setup omapfb
[ 9.150604] platform omapfb: Driver omapfb requests probe deferral
[ 9.183868] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.192749] usbcore: registered new interface driver kaweth
[ 9.202880] nf_conntrack version 0.5.0 (16127 buckets, 64508 max)
[ 9.298950] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB
Ethernet driver
[ 9.307037] usbcore: registered new interface driver pegasus
[ 9.317718] wl1271_sdio: probe of mmc1:0001:2 failed with error -61
[ 9.334289] xt_time: kernel timezone is -0000
[ 9.340789] usbcore: registered new interface driver asix
[ 9.348205] usbcore: registered new interface driver ax88179_178a
[ 9.370452] cfg80211: World regulatory domain updated:
[ 9.376129] cfg80211: DFS Master region: unset
[ 9.380798] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.391113] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 9.393341] usbcore: registered new interface driver dm9601
[ 9.399566] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 9.413818] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 9.415802] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.432220] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.435760] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 9.450683] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 9.450683] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 9.465789] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 9.513824] usbcore: registered new interface driver MOSCHIP usb-
ethernet driver
[ 9.528381] PPP generic driver version 2.4.2
[ 9.534759] NET: Registered protocol family 24
[ 9.541290] usbcore: registered new interface driver smsc95xx
[ 9.619110] hub 1-1:1.0: USB hub found
[ 9.623474] hub 1-1:1.0: 5 ports detected
[ 9.631256] omapfb omapfb: no displays
[ 9.635772] omapfb omapfb: failed to setup omapfb
[ 9.640777] platform omapfb: Driver omapfb requests probe deferral
[ 10.005798] usb 1-1.1: new high-speed USB device number 3 using ehci-
omap
[ 10.131011] smsc95xx v1.0.4
[ 10.579620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-
4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 6a:c3:e3:66:38:14
[ 10.593109] omapfb omapfb: no displays
[ 10.597137] omapfb omapfb: failed to setup omapfb
[ 10.602355] platform omapfb: Driver omapfb requests probe deferral
[ 13.834259] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote
wakeup
[ 13.892730] device eth0 entered promiscuous mode
[ 13.900878] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/20573#comment:3>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
