#20594: Alix 2c1 won't boot with Chaos Calmer 15.05
--------------------------+----------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords: Alix
--------------------------+----------------------------------
Comment (by anonymous):
PC Engines ALIX.2 v0.99h
640 KB Base Memory
130048 KB Extended Memory
01F0 Master 848A SanDisk SDCFH-256
Phys C/H/S 980/16/32 Log C/H/S 980/16/32
GRUB loading....
GNU GRUB version 2.02~beta2
+----------------------------------------------------------------------------+
|*OpenWrt
|
| OpenWrt (failsafe)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return
previous menu.
The highlighted entry will be executed automatically in 0s.
Booting `OpenWrt'
[ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version
4.8.3 (Ope
nWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 20:41:03 CEST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007ffffff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff]
reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] e820: last_pfn = 0x8000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x07c00000-0x07ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07bfffff]
[ 0.000000] 128MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 08000000
[ 0.000000] low ram: 0 - 08000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x07ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x07ffffff]
[ 0.000000] Using APIC driver default
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] e820: [mem 0x08000000-0xffefffff] available for PCI devices
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pag
es: 32415
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz
root=PARTUUID=f5d4f
8ee-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8
noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 125012K/130684K available (3044K kernel code, 206K
rwdata
, 636K rodata, 220K init, 260K bss, 5672K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfffa2000 ( 887 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] .init : 0xc13cf000 - 0xc1406000 ( 220 kB)
[ 0.000000] .data : 0xc12f9708 - 0xc13cdb00 ( 848 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12f9708 (3045 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:24 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 431.651 MHz processor
[ 0.030007] Calibrating delay loop (skipped), value calculated using
timer fr
equency.. 863.30 BogoMIPS (lpj=4316510)
[ 0.050014] pid_max: default: 32768 minimum: 301
[ 0.060197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070021] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.080824] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.080824] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.090010] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05,
model: 0
a, stepping: 02)
[ 0.120324] Performance Events: no PMU driver, software events only.
[ 0.142968] NET: Registered protocol family 16
[ 0.161174] cpuidle: using governor ladder
[ 0.171011] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
[ 0.180014] PCI: Using configuration type 1 for base access
[ 0.200540] SCSI subsystem initialized
[ 0.210955] usbcore: registered new interface driver usbfs
[ 0.220122] usbcore: registered new interface driver hub
[ 0.230090] usbcore: registered new device driver usb
[ 0.240365] PCI: Probing PCI hardware
[ 0.250198] PCI host bridge to bus 0000:00
[ 0.260030] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.270025] pci_bus 0000:00: root bus resource [mem
0x00000000-0xffffffff]
[ 0.280022] pci_bus 0000:00: No busn resource found for root bus, will
use [b
us 00-ff]
[ 0.301379] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]
[ 0.310022] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.320024] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]
[ 0.330023] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.343328] Switched to clocksource pit
[ 0.360268] NET: Registered protocol family 2
[ 0.364715] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.375655] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.384772] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.393900] TCP: reno registered
[ 0.403633] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.421196] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.430214] NET: Registered protocol family 1
[ 0.434308] platform rtc_cmos: registered platform RTC device (no PNP
device
found)
[ 0.450639] alix: system is recognized as "PC Engines ALIX.2 v0.99h"
[ 0.459969] NatSemi SCx200 Driver
[ 0.470880] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.505615] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.523189] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.536377] msgmni has been set to 244
[ 0.548792] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 2
52)
[ 0.561050] io scheduler noop registered
[ 0.572866] io scheduler deadline registered (default)
[ 0.578730] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.588068] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
921600) is a
NS16550A
[ 0.602222] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
921600) is a
NS16550A
[ 0.610294] Non-volatile memory driver v1.3
[ 0.622916] AMD Geode RNG detected
[ 0.633463] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver
Initializing
[ 0.644917] platform pc8736x_gpio.0: no device found
[ 0.660536] cs5535-gpio cs5535-gpio: reserved resource region [io
0x6100-0x6
1ff]
[ 0.673351] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io
0x6200-0
x623f]
[ 0.686368] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 0.694403] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 0.716709] scsi host0: pata_cs5536
[ 0.729205] scsi host1: pata_cs5536
[ 0.740139] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
irq 14
[ 0.75063] ata2: DUMMY
[ 0.759647] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald
Becker
[ 0.776067] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management
Adapter) a
t 0xc8808000, 00:0d:b9:15:d8:34, IRQ 10
[ 0.788461] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1,
status 0
x7849 advertising 05e1 Link 0000
[ 0.804508] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management
Adapter) a
t 0xc880a000, 00:0d:b9:15:d8:35, IRQ 11
[ 0.816882] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1,
status 0
x7849 advertising 05e1 Link 0000
[ 0.832905] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management
Adapter) a
t 0xc880c000, 00:0d:b9:15:d8:36, IRQ 15
[ 0.835300] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1,
status 0
x7849 advertising 05e1 Link 0000
[ 0.845262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.854867] ehci-pci: EHCI PCI platform driver
[ 0.868415] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 0.874173] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus
numbe
r 1
[ 0.886558] ehci-pci 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 0.913386] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 0.932655] hub 1-0:1.0: USB hub found
[ 0.933990] hub 1-0:1.0: 4 ports detected
[ 0.947614] ehci-platform: EHCI generic platform driver
[ 0.953422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.972027] ohci-pci: OHCI PCI platform driver
[ 0.975556] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 0.992356] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus
numbe
r 2
[ 0.994668] ohci-pci 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 1.096766] hub 2-0:1.0: USB hub found
[ 1.108120] hub 2-0:1.0: 4 ports detected
[ 1.121099] ohci-platform: OHCI generic platform driver
[ 1.148703] i8042: No controller found
[ 1.160529] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.169681] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.179043] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0'
registered
[ 1.191385] cs5535-mfgpt cs5535-mfgpt: registered timer 0
[ 1.197792] sc1200wdt: build 20020303
[ 1.208822] sc1200wdt: io parameter must be specified
[ 1.214618] cs5535-mfgpt cs5535-mfgpt: registered timer 1
[ 1.230871] cs5535-clockevt: Registering MFGPT timer as a clock event,
using
IRQ 7
[ 1.234231] TCP: cubic registered
[ 1.243321] NET: Registered protocol family 17
[ 1.256885] bridge: automatic filtering via arp/ip/ip6tables has been
depreca
ted. Update your scripts to load br_netfilter if you need this.
[ 1.264866] Bridge firewalling registered
[ 1.277039] 8021q: 802.1Q VLAN Support v1.8
[ 1.289977] Using IPI Shortcut mode
[ 1.301977] ata1.00: CFA: SanDisk SDCFH-256, FhDA0145, max PIO4
[ 1.309864] ata1.00: 501760 sectors, multi 0: LBA
[ 1.315103] rtc_cmos rtc_cmos: setting system clock to 2015-09-25
10:17:51 UT
C (1443176271)
[ 1.340253] ata1.00: configured for PIO4
[ 1.352588] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-25
0145 PQ
: 0 ANSI: 5
[ 1.358430] sd 0:0:0:0: [sda] 501760 512-byte logical blocks: (256
MB/245 MiB
)
[ 1.371121] sd 0:0:0:0: [sda] Write Protect is off
[ 1.375806] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doe
sn't support DPO or FUA
[ 1.386293] sda: sda1 sda2
[ 1.396264] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1.464870] EXT4-fs (sda2): mounted filesystem without journal. Opts:
(null)
[ 1.466199] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.476566] Freeing unused kernel memory: 220K (c13cf000 - c1406000)
[ 1.485967] Switched to clocksource tsc
[ 1.844120] init: Console is alive
[ 1.854769] init: - watchdog -
[ 2.533032] Button Hotplug driver version 0.4.1
[ 2.869368] init: - preinit -
[ 2.897817] random: nonblocking pool is initialized
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
[ 6.075760] mount_root: mounting /dev/root
[ 6.088502] EXT4-fs (sda2): warning: mounting unchecked fs, running
e2fsck is
recommended
[ 6.116732] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.197248] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory
[ 6.242004] procd: - early -
[ 6.251320] procd: - watchdog -
[ 6.903016] procd: - ubus -
[ 7.929405] procd: - init -
Please press Enter to activate this console.
[ 8.399410] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 8.469259] NET: Registered protocol family 10
[ 8.489885] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.543394] Loading modules backported from Linux version
master-2015-03-09-0
-g141f155
[ 8.567296] Backport generated by backports.git
backports-20150129-0-gdd4a670
[ 8.590715] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.613463] nf_conntrack version 0.5.0 (1956 buckets, 7824 max)
[ 8.650239] xt_time: kernel timezone is -0000
[ 8.681421] cfg80211: Calling CRDA to update world regulatory domain
[ 8.735295] cfg80211: World regulatory domain updated:
[ 8.752780] cfg80211: DFS Master region: unset
[ 8.767238] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gai
n, max_eirp), (dfs_cac_time)
[ 8.798553] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 m
Bm), (N/A)
[ 8.824610] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 m
Bm), (N/A)
[ 8.850667] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 m
Bm), (N/A)
[ 8.876724] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 m
Bm), (N/A)
[ 8.902786] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AU
TO), (N/A, 2000 mBm), (0 s)
[ 8.933268] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000
mBm), (0 s)
[ 8.959568] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 m
Bm), (N/A)
[ 8.985625] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0
mBm), (N/A)
[ 9.060527] PPP generic driver version 2.4.2
[ 9.075305] NET: Registered protocol family 24
[ 9.226542] Clocksource tsc unstable (delta = 279991012 ns)
[ 9.243527] Switched to clocksource pit
[ 14.090863] 8021q: adding VLAN 0 to HW filter on device eth0
[ 14.109267] device eth0 entered promiscuous mode
[ 14.134785] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 14.174832] 8021q: adding VLAN 0 to HW filter on device eth1
[ 14.182348] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
--
Ticket URL: <https://dev.openwrt.org/ticket/20594#comment:4>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
