It would also really help threading and continuity if you'd respond to
the original thread instead of a daily digest.
> I'm using a Siemens SL45 data cable to connect my PC to the WL-500G Premium
> router.
> serial device -> /dev/ttyS0
The only cables I can find for the SL45 are USB-based; if so, this is
the wrong device - you're looking for /dev/ttyUSBN, where N is the Nth
USB serial adapter you've attached; for your purposes it's probably
'0'.
> instead of getting some command prompt in minicom i get the following string
>
> AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
That's minicom attempting to initialize the 'modem' - original use was
for dialing. Enter the configuration menu ('minicom -s' as root or
'ctrl-a o'), select 'Modem and dialing', and wipe out the init/reset
strings.
That should get you where you need to be; if not, we'll go from there,
but your question may be better served in a minicom-specific ML.
_______________________________________________
openwrt-users mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
