hi there after successfully installing kamikaze on two of my wrt54gl v1.1 routers i wanted to do this on my third one. but i wasn't as successful as before. all three routers are the same version (v1.1 cl7b) and i used the same firmware image from http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/openwrt-wrt54g-2.4-squashfs.bin and even the same installation method (tftp). but the third router refuses to boot and i don't know why.
so i attached a serial cable but with my limited knowlegde i am not able to
figure what is really going wrong.
below you can see the output of the serial console. maybe someone can help
me figure out what went wrong and help me fix this.
best regards
peter
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Nov 14 18:06:25 CST 2005 ([EMAIL PROTECTED])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
CPU type 0x29008: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80300000 - 0x803A39C0 (670144)
Initialized Data: 0x803398D0 - 0x8033BFE0 (10000)
BSS Area: 0x8033BFE0 - 0x8033D9C0 (6624)
Local Heap: 0x8033D9C0 - 0x803A19C0 (409600)
Stack Area: 0x803A19C0 - 0x803A39C0 (8192)
Text (code) segment: 0x80300000 - 0x803398D0 (235728)
Boot area (physical): 0x003A4000 - 0x003E4000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.7
The boot is CFE
mac_init(): Find mac [00:16:B6:B7:79:2C] in location 0
Nothing...
eou_key_init(): Find key pair in location 0
The eou device id is same
The eou public key is same
The eou private key is same
Device eth0: hwaddr 00-16-B6-B7-79-2C, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: CODE Pattern is CORRECT!
upgrade_ver[v4.60.1] upgrade_ver[46001] 4712_ver[15000]
Done. 1839136 bytes read
fname=flash1.trx
CODE Pattern is correct! (W54G)
Programming...done. 1839104 bytes written
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029008
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.34 ([EMAIL PROTECTED]) (gcc version 3.4.6 (OpenWrt-2.0)) #3
Sun Sep 30 20:33:21 CEST 2007
Setting the PFC to its default value
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2
init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14224k/16384k available (1462k kernel code, 2160k reserved, 100k data,
80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:16:b6:b7:79:2c
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x121cc8
Updating TRX offsets and length:
old trx = [0x0000001c, 0x000008ec, 0x0007e400], len=0x001c1000 crc32=0xe506a83c
new trx = [0x0000001c, 0x000008ec, 0x0007e400], len=0x001b0000 crc32=0x68f6f9e1
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000be400-0x001f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force
read-only
0x003f0000-0x00400000 : "nvram"
0x001f0000-0x003f0000 : "rootfs_data"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]>
All bugs added by David S. Miller <[EMAIL PROTECTED]>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
mount: mounting none on /sys failedmount: can't resolve symbol 'epu´q'
/bin/shKernel panic: Attempted to kill init!
can't resolve symbol 'epu´q'
<0>Rebooting in 5 seconds..Please stand by while rebooting the system...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Nov 14 18:06:25 CST 2005 ([EMAIL PROTECTED])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
CPU type 0x29008: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80300000 - 0x803A39C0 (670144)
Initialized Data: 0x803398D0 - 0x8033BFE0 (10000)
BSS Area: 0x8033BFE0 - 0x8033D9C0 (6624)
Local Heap: 0x8033D9C0 - 0x803A19C0 (409600)
Stack Area: 0x803A19C0 - 0x803A39C0 (8192)
Text (code) segment: 0x80300000 - 0x803398D0 (235728)
Boot area (physical): 0x003A4000 - 0x003E4000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.7
The boot is CFE
mac_init(): Find mac [00:16:B6:B7:79:2C] in location 0
Nothing...
eou_key_init(): Find key pair in location 0
The eou device id is same
The eou public key is same
The eou private key is same
Device eth0: hwaddr 00-16-B6-B7-79-2C, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
--
if voting really could change anything - it would be illegal - of course
pgpmpRpfc5dfc.pgp
Description: PGP signature
_______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
