Am Tuesday, den 3 February hub Ján Chrastina folgendes in die Tasten:
> I have DLink DSL624T router with freshly installed OpenWRT.
> Can someone give a hint how to bring up ADSL line? I am novice in DSL/ATM/PPP
> field.
>
> Spanish provider YA.COM is saying I have connection type "Ethernet", not
> "PPPoE" nor "PPPoA". I have no username, no password.
> I am quite sure that it is kind of ATM, in original DLink firmware I had
> following:
> ATM VC Setting:
> PVC: PVC0
> VPI: 8
> VCI: 32
> Vitrual Circuit Enabled
> WAN Setting: Dynamic IP Address (other options here are: Static IP Address,
> PPPoA/PPPoE, Bridged Mode)
>
> Dynamic IP:
> Connection Type: 1483 Bridged IP LLC (other option here is 1483 Bridged IP
> VC-Mux)
> Cloned MAC Address: 00:1B:11:3A:BA:93
> MTU: 1400
> NAT Enabled
> Firewall Enabled
It sounds to me, that you should install the br2864ctl package, and fire up an
virtual ethernet device via /etc/config/network:
[...]
config atm-bridge
option unit 0
option encaps llc
option payload bridged
option vpi 8
option vci 32
[...]
After this you get a new ethernet interface nas0. Use it in the same config
file to
setup a wan connection with proto dhcp.
> ATM:
> Service Category: UBR (other options here are CBR, VBR-nrt, VBR-rt)
>
> Thanks a lot for any advice!
> Jan
>
>
>
>
> _______________________________________________
> openwrt-users mailing list
> [email protected]
> http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
--
Joerg Jungermann
------------------------------------------------------------
Rechnerbetrieb Mathematik | IT Security - Netzwerke, Linux
Universitaet-Paderborn | Embedded Devices, Typo3
_______________________________________________
openwrt-users mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
