Hi, I have an "Asus wl 500 gp v2" router, and I flash it with: http://downloads.openwrt.org/kamikaze/8.09/brcm-2.4/openwrt-brcm-2.4-squashfs.trx
then I ssh into it, and: *opkg update opkg install fdisk mc usbutils kmod-usb-uhci kmod-usb-ohci kmod-usb-uhci-iv kmod-usb2 kmod-usb-storage kmod-fs-vfat* Then I put a pendrive in one of the USB ports, and reboot the router.. "fdsik -l" doesn't give back nothing.. :( there's no folder under "/dev/scsi/..." The pendrive is formatted in fat32 dmesg: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6 usb-ohci.c: usb-00:03.0, PCI device 14e4:471a usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 usb-uhci.c: $Revision: 1.275 $ time 06:14:26 Jan 11 2009 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver SB USB20H init SB COREREV: 2 USB20H fcr: 0x64 USB20H shim cr: 0x8f7 PCI: Setting latency timer of device 00:03.1 to 64 ehci_hcd 00:03.1: PCI device 14e4:471a ehci_hcd 00:03.1: irq 6, pci mem b8003800 usb.c: new USB bus registered, assigned bus number 2 *ehci_hcd 00:03.1: illegal capability!* ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: connect-debounce failed, port 1 disabled hub.c: new USB device 00:03.1-1, assigned address 2 hub.c: USB hub found hub.c: 2 ports detected what can I do??? try other firmware? :(
_______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
