Hi Trty to use tftp and ping 1`92.168.1.1 simultaneously.Unplug ur router and power on as soon as you get the ping reply try to insert teh image again using tftp clent.Make sure that you are using the appropriate Image for your router.Try many times ,you will succeed.
Regards Mohd Yusuf Siddiqui Embedded Technologies Mobile: +91-9958995218 Visit us: www.xavient.com E-mail: [email protected] __________________________________________________________________________________________________________________________________________ This communication & accompanying documents ("this e-mail") contains confidential and/or privileged information for exclusive use of the individual to whom it is addressed. If you are not the intended recipient, please immediately notify the company & delete this e-mail. Any unauthorized use or disclosure of this e-mail is strictly prohibited. Representations in this e-mail are subject to contract. As an e-mail user please be cautious of the technical & other vulnerabilities of the internet which may result in malicious and/or unauthorized access to/use/alteration of e-mails/e-mail IDs. -----Original Message----- From: [email protected] on behalf of Robert P. J. Day Sent: Fri 2/27/2009 6:16 PM To: OpenWRT mailing list Subject: [SPAM] - [OpenWrt-Users] flashing my ASUS WL500GP V2 apparently creates abrick - Email found in subject based on a config file provided by michael buesch yesterday, i updated my svn working copy to trunk, configured and successfully built an openwrt-brcm47xx-squashfs.trx image, then followed the instructions here: http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GPV2 as in: 1) put the router in diagnostic mode 2) manually configured my laptop to have IP 192.168.1.2 3) tftp'ed to the router (192.168.1.1) 4) set tftp options trace, verbose, binary 5) "put" the trx image, which generated the expected page after page of packets and ACKs to and from the router 6) let the router sit for several minutes after which i power-cycled and ... nothing. can't ping, can't telnet, can't browse. if anyone else has flashed that model of router, can you see anything i did obviously wrong? thanks. rday p.s. just to make sure, i put it back in diag mode and went through all the steps again, with the same result. p.p.s. i skipped most of the steps on that web page since most of it had to do with getting around issues with earlier kernels. i simply built my image in one pass, and tried to flash. ======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry: Have classroom, will lecture. http://crashcourse.ca Waterloo, Ontario, CANADA ======================================================================== _______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
_______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
