Hello, I have a wrt54g v2.2 with OpenWrt Backfire, and I would like to poll the state of the reset button, or get an interrupt when the reset button is pressed. I have no buttons on the front panel, but the another GPIO input port (GPIO4) would be good as well, because the wire is there on the PCB.
I found several forum topics about kamikaze, but i could find the same files in the file system, like /etc/hotplug.d/buttons, or /dev/gpio, /sys/class/gpio. I have a custom openwrt installation which is built by the ImageBuilder: make image PROFILE="Broadcom-b43" PACKAGES="-dnsmasq -e2fsprogs -kmod-fs-ext3 -kmod-ppp -kmod-pppoe -kmod-scsi-core -kmod-usb-core -kmod-usb-ohci -kmod-usb-storage -kmod-usb2 -ppp -ppp-mod-pppoe -iptables -iptables-mod-conntrack -iptables-mod-nat -kmod-ipt-conntrack -kmod-ipt-core -kmod-ipt-nat -kmod-ipt-nathelper -firewall -nvram python-mini pyserial kmod-b43" FILES=files/ After flashing this image, i installed the following packages: kmod-input-core kmod-input-polldev kmod-input-gpio-buttons kmod-button-hotplug, gpioctl. So how could i read the state of the reset button or the other input gpio port? Thanks! Gábor
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
