I have recently bought a Netgear WNR2200 N300 router. I haven't read too careful the documentation in the vain hope everything will go smooth.
I have followed the guide on the OpenWRT wiki[1]. The router is bought in Europe. I have downloaded the latest package as provided by the dowloads section[2]. I have reset the device. Never thought about backing the router up. I have waited for the light to turn green, as stated in the guide. I have started the connection with the fixed IP and pushed with tftp the package. I have waited more than 10 minutes. Now telnet to 192.168.1.1 says no route to the host. I don't know what to do next. Right now I do not have an internet connection at home. But I want to prepare the router to link it to the device provided by the ISP. This way the router of the ISP will act as a simple VDSL modem and everything else will be handled, I hope, by the OpenWRT box. [1] http://wiki.openwrt.org/toh/netgear/wnr2200 [2] http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/openwrt-ar71xx-generic-wnr2200-squashfs-factory.img _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
