-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Hello Thiago,

No, my question was if you used the different cables in production
and testing the router.

Mit freundlichen Grüßen/Regards,
Noel Kuntze

GPG Key ID: 0x63EC6658
Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658

Am 12.02.2015 um 00:44 schrieb Thiago Coutinho:
> I don't know if I understood your question, but yes, I have replaced just the 
> router with a WDR3600 and it's working.
>
> 2015-02-11 21:39 GMT-02:00 Noel Kuntze <[email protected] 
> <mailto:[email protected]>>:
>
>
> Hello Thiago,
>
> Meaning that another cable was used in production to
> connect the router to the rest of the network
> than you used to test it?
>
> Mit freundlichen Grüßen/Regards,
> Noel Kuntze
>
> GPG Key ID: 0x63EC6658
> Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
>
> Am 12.02.2015 um 00:36 schrieb Thiago Coutinho:
> > Hi Noel.
>
> > What led me to think that the problem was the router was that some hours 
> > earlier it have stopped to work on production (lost connection on WAN and 
> > LAN), so I picked up the router to make some more tests. Now I will have to 
> > make sure it's working properly to use it again on production.
>
> > Thanks anyway.
>
> > 2015-02-11 21:30 GMT-02:00 Noel Kuntze <[email protected] 
> > <mailto:[email protected]> <mailto:[email protected] 
> > <mailto:[email protected]>>>:
>
>
> > Pro tip: Always check the cables first. It's nearly always the cables.
>
> > Mit freundlichen Grüßen/Regards,
> > Noel Kuntze
>
> > GPG Key ID: 0x63EC6658
> > Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
>
> > Am 12.02.2015 um 00:27 schrieb Thiago Coutinho:
> > > Actually my problem was a faulty ethernet cable. Sorry for the noise.
>
> > > 2015-02-10 22:36 GMT-02:00 Thiago Coutinho <[email protected] 
> > > <mailto:[email protected]> <mailto:[email protected] 
> > > <mailto:[email protected]>> <mailto:[email protected] 
> > > <mailto:[email protected]> <mailto:[email protected] 
> > > <mailto:[email protected]>>>>:
>
> > >     I've this router for 2+ years. Today, after a reboot, I can't connect 
> > > using the ethernet ports. WiFi was working, but I formatted to factory 
> > > defaults and now I don't have access to it.
>
> > >     My laptop shows that have link, but just at 10MB/s and half-duplex:
>
> > >     Settings for eth0:
> > >         Supported ports: [ TP ]
> > >         Supported link modes:   10baseT/Half 10baseT/Full
> > >                                 100baseT/Half 100baseT/Full
> > >                                 1000baseT/Full
> > >         Supported pause frame use: No
> > >         Supports auto-negotiation: Yes
> > >         Advertised link modes:  10baseT/Half
> > >         Advertised pause frame use: No
> > >         Advertised auto-negotiation: Yes
> > >         Speed: 10Mb/s
> > >         Duplex: Half
> > >         Port: Twisted Pair
> > >         PHYAD: 1
> > >         Transceiver: internal
> > >         Auto-negotiation: on
> > >         MDI-X: off (auto)
> > >         Supports Wake-on: pumbg
> > >         Wake-on: g
> > >         Current message level: 0x00000007 (7)
> > >                        drv probe link
> > >         Link detected: yes
>
> > >     When I try to force full-duplex at 100MB/s the connection stays 
> > > intermitent:
>
> > >     Settings for eth0:
> > >         Supported ports: [ TP ]
> > >         Supported link modes:   10baseT/Half 10baseT/Full
> > >                                 100baseT/Half 100baseT/Full
> > >                                 1000baseT/Full
> > >         Supported pause frame use: No
> > >         Supports auto-negotiation: Yes
> > >         Advertised link modes:  100baseT/Full
> > >         Advertised pause frame use: No
> > >         Advertised auto-negotiation: Yes
> > >         Speed: Unknown!
> > >         Duplex: Unknown! (255)
> > >         Port: Twisted Pair
> > >         PHYAD: 2
> > >         Transceiver: internal
> > >         Auto-negotiation: on
> > >         MDI-X: Unknown (auto)
> > >         Supports Wake-on: pumbg
> > >         Wake-on: g
> > >         Current message level: 0x00000007 (7)
> > >                        drv probe link
> > >         Link detected: no
>
> > >     Any ideas?
>
> > >     --
> > >     Thiago Coutinho
>
> > >     "O povo não deveria temer o governo. O governo é quem deveria temer o 
> > > povo."
> > >     V de Vingança
>
>
>
>
> > > --
> > > Thiago Coutinho
>
> > > "O povo não deveria temer o governo. O governo é quem deveria temer o 
> > > povo."
> > > V de Vingança
>
>
> > > _______________________________________________
> > > openwrt-users mailing list
> > > [email protected] <mailto:[email protected]> 
> > > <mailto:[email protected] 
> > > <mailto:[email protected]>>
> > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
>
> >     _______________________________________________
> >     openwrt-users mailing list
> >     [email protected] 
> > <mailto:[email protected]> 
> > <mailto:[email protected] 
> > <mailto:[email protected]>>
> >     https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
>
>
>
>
> > --
> > Thiago Coutinho
>
> > "O povo não deveria temer o governo. O governo é quem deveria temer o povo."
> > V de Vingança
>
>
> > _______________________________________________
> > openwrt-users mailing list
> > [email protected] <mailto:[email protected]>
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
>
>     _______________________________________________
>     openwrt-users mailing list
>     [email protected] <mailto:[email protected]>
>     https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
>
>
>
>
> --
> Thiago Coutinho
>
> "O povo não deveria temer o governo. O governo é quem deveria temer o povo."
> V de Vingança
>
>
> _______________________________________________
> openwrt-users mailing list
> [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=V9SG
-----END PGP SIGNATURE-----
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users

Reply via email to