On Tuesday, March 3, 2015 10:56:03 PM MSK, Farid Farid wrote:
Thanks Pavel.
I can't even see any phy0xx in trigger. Where do they come from?
I do have kmod-ledtrig-netdev installed.( at least opkg list
shows the package)
Here is also the device tree for that LED:
user { label ="wifired" gpios = <&gpio5
23 0> default-state ="on"
linux,default-trigger = "netdev"}
Thanks,Farid
Hmm, I don't know what else to suggest, maybe it's not supported by your
hardware.
I also run another OpenWRT both with a different chip (Atheros, not
Broadcom).
These are its selected LED triggers:
# cat /sys/class/leds/tp-link\:green\:wlan/trigger
none timer default-on netdev gpio heartbeat morse oneshot phy0rx phy0tx
phy0assoc phy0radio [phy0tpt]
# cat /sys/class/leds/tp-link\:green\:lan/trigger
none timer default-on [netdev] gpio heartbeat morse oneshot phy0rx phy0tx
phy0assoc phy0radio phy0tpt
Wiki is not very detailed about it:
http://wiki.openwrt.org/doc/uci/system#wifi_activity
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
