I want to do demonstrations of OpenWRT/LEDE in scenarios where you run out of IPv4 addresses for the WAN links.
I’ve been trying for hours to find more info about the configuration of the 464XLAT package, as I’m not succeeding to configure a CLAT to work in a very simple scenario. I got it working about one year ago, but lost that configuration and trying to reproduce it now fails … The main problem is that I don’t know what are the parameters needed in the network file, and even looking at the package source code I must be doing something really silly wrongly … My scenario is quite simple. I’ve a virtual machine with Ubuntu running a DNS64 with bind9 and NAT64 with Jool. This has been tested and is working. In the OpenWRT where I want to run CLAT, I’ve: 1) WAN interface configured only with an IPv6 address (and of course I’ve checked that I can ping from here to the DNS/NAT64 and Internet with IPv6). 2) LAN interface with an IPv6 prefix /64, an IPv4 /24 (private), and DHCP and SLAAC running. I can ping with both IPv4 and IPv6 to the router from a client. I tried both with Luci and editing the network file. Regards, Jordi ********************************************** IPv4 is over Are you ready for the new Internet ? http://www.consulintel.es The IPv6 Company This electronic message contains information which may be privileged or confidential. The information is intended to be for the use of the individual(s) named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information, including attached files, is prohibited. _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
