For debug purposes, you can trick it by replacing one of the output vectors with your custom vector when output is written. Currently, we only have a fixed set of vectors written out, you will find them here: https://github.com/OPM/opm-output/blob/master/opm/output/eclipse/EclipseWriter.cpp#L696
If you use the trick above, you should be able to visualize it directly from the simulation. Alternatively, you can just print your custom vector to some file (in ASCII), and place it as one of the properties in the input grdecl file (that is where the grid is given on the input side), for instance put it under PERMY. Resinsight will happily open up the grdecl file as input with various cell properties included. Cheers, Alf ________________________________________ From: Opm [opm-boun...@opm-project.org] on behalf of Markus Blatt [mar...@dr-blatt.de] Sent: Tuesday, July 12, 2016 1:05 PM To: opm@opm-project.org Subject: [Opm] adding custom cell data to output and visualize it. Hi, let us imagine that I have a custom vector containing data attached to the cells. Is there a way to output this data in addition to the default values to eclipse output? How? I assume that such an additional field can be easily visualized with ResInsight or am I wrong? Markus _______________________________________________ Opm mailing list Opm@opm-project.org http://opm-project.org/cgi-bin/mailman/listinfo/opm ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorised use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you _______________________________________________ Opm mailing list Opm@opm-project.org http://opm-project.org/cgi-bin/mailman/listinfo/opm
