Thank you Bård. That does make sense from how you explain it.
I admit I am looking at flow through my Eclipse glasses but this must be a new
feature as my model worked on the 18.10 version.
Regards,
Karl
-----Original Message-----
From: Bård Skaflestad <bard.skafles...@sintef.no>
Sent: 07 February 2020 19:07
To: Stephen, Karl D <k.d.step...@hw.ac.uk>; opm@opm-project.org
Subject: RE: Problem with WELDIMS
Hi,
In this case the manual is somewhat incomplete or possibly misleading. Item 4
of WELLDIMS really is both the maximum number of wells in a group *and* the
maximum number of child groups in a group. The first applies to groups that
"own"/contain wells and the latter applies to groups that "own"/contain other
groups.
On the other hand, in your case all groups other than the implicit FIELD group
contain exactly one child item so in this case it's only the FIELD group that
happens to have two child items. I suppose FIELD could be treated as a special
case (e.g., by inferring the maximum size from the declared maximum number of
groups in the run), but then outputting group-related results will be more
complicated. The output protocol requires that each group records its child
groups (or contained wells) in an integer array and that array has to be sized
according to the maximum group size (number of child wells or child groups).
I hope this helps. In the short term we're not going to be able to change
this, so I suggest raising the fourth item of WELLDIMS in this model.
Regards,
Bård Skaflestad
SINTEF Digital, Mathematics & Cybernetics Computational Geosciences group
-----Original Message-----
From: Opm <opm-boun...@opm-project.org> On Behalf Of Stephen, Karl D
Sent: Tuesday, February 4, 2020 10:05 AM
To: opm@opm-project.org
Subject: [Opm] Problem with WELDIMS
Hi,
Has the usage of WELDIMS changed in the recent version of flow?
I have a simple quarter 5 spot model where injector, "INJ", is placed on one
corner and producer "PROD" on the other of a square model (5 x 5 x 3 cells).
PROD is added to group G1 and INJ is added to group G2 in WELLSPECS. Both wells
are completed vertically over the three layers.
I would expect WELLDIMS to be set up as:
-- Maximum well/connection/group values
-- #wells #cons/w #grps #wells/grp
-- ------ ------- ----- ----------
WELLDIMS
2 3 2 1 /
When WELLSPECS and COMPDAT are:
-- Location of wellhead and pressure gauge
-- Well Well Location BHP Pref.
-- name group I J datum phase
-- ----- ---- - - ----- -----
WELSPECS
PROD G1 1 1 8000 OIL /
INJ G2 5 5 8000 WATER /
/
-- Completion interval
-- Well Location Interval Status Well
-- name I J K1 K2 O or S ID
-- ---- - - -- -- ------ ------
COMPDAT
PROD 1 1 1 3 OPEN 2* 0.667 /
INJ 5 5 1 3 OPEN 2* 0.667 /
/
This is what worked in the previous version of flow that I ran (18.10) and in
ECLIPSE. I still have 18.10 installed on a virtual machine.
Now I get the error message:
Error: Run uses maximum group size of 2, but allocates at most 1 in RUNSPEC
section. Increase item 4 of WELLDIMS accordingly.
Failed to create valid EclipseState object.
Exception caught: RUNSPEC_GROUPSIZE_TOO_LARGE: Run uses maximum group size of
2, but allocates at most 1 in RUNSPEC section. Increase item 4 of WELLDIMS
accordingly.
All is fine if I set the fourth item of WELDIMS to 2 for the number of groups
but it should be possible to set it to 1 as there is one well per group.
Is this a bug? The latest manual for 19.10 states that the 4th item is the
"maximum number of wells that can belong to a group".
It seems as if MXGRPS and MXGRPW are being confused?
Regards,
Karl
________________________________
Founded in 1821, Heriot-Watt is a leader in ideas and solutions. With campuses
and students across the entire globe we span the world, delivering innovation
and educational excellence in business, engineering, design and the physical,
social and life sciences. This email is generated from the Heriot-Watt
University Group, which includes:
1. Heriot-Watt University, a Scottish charity registered under number
SC000278
2. Heriot- Watt Services Limited (Oriam), Scotland's national performance
centre for sport. Heriot-Watt Services Limited is a private limited company
registered is Scotland with registered number SC271030 and registered office at
Research & Enterprise Services Heriot-Watt University, Riccarton, Edinburgh,
EH14 4AS.
The contents (including any attachments) are confidential. If you are not the
intended recipient of this e-mail, any disclosure, copying, distribution or use
of its contents is strictly prohibited, and you should please notify the sender
immediately and then delete it (including any attachments) from your system.
_______________________________________________
Opm mailing list
Opm@opm-project.org
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fopm-project.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fopm&data=02%7C01%7CBard.Skaflestad%40sintef.no%7C8001f6b460cd4fc050bb08d7a9516bc8%7Ce1f00f39604145b0b309e0210d8b32af%7C1%7C1%7C637164039471198860&sdata=ru6zxSBQXWvPDHM1CfUL5Zt701TQ70mkoKM5gTfbAnE%3D&reserved=0
_______________________________________________
Opm mailing list
Opm@opm-project.org
https://opm-project.org/cgi-bin/mailman/listinfo/opm
