Installing Eigen 3.1 did not fix it. I am still getting the same error. Any suggestions from the ones who have done it in the past.
OS is Oracle Linux 7 (binary compatible with RHEL). Thanks. -----Original Message----- From: Yogi Pandey Sent: Thursday, March 12, 2020 5:16 PM To: Joakim Hove <joakim.h...@gmail.com>; opm@opm-project.org Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Looking at the documentation here: https://urldefense.com/v3/__https://github.com/OPM/opm-simulators/tree/release/2019.10__;!!GqivPVa7Brio!I_1R6MQvXO98YsD--aGpMqnti1zfa63_k1NpHzyDpC9xvLyKlJB9DRRyCv5O-y_MuQ$ It seems I need an additional library Eigen 3.1. Will try with it, and let everyone know how it goes. Thanks. -----Original Message----- From: Yogi Pandey Sent: Thursday, March 12, 2020 5:01 PM To: Joakim Hove <joakim.h...@gmail.com>; opm@opm-project.org Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Thank you for your comment. Yes, I already have that step. I had omitted some steps as they are obvious. Here’s the full set of commands for the pre-requisites other than the ones installed from source: sudo yum install -y devtoolset-8 echo 'source /opt/rh/devtoolset-8/enable' >> ~/.bashrc echo 'export LD_LIBRARY_PATH=${LD_LIBRARY_PATH-}:/usr/lib64:/usr/local/lib' >> ~/.bashrc echo 'export C_INCLUDE_PATH=${C_INCLUDE_PATH-}:/usr/local/include' >> ~/.bashrc source ~/.bashrc sudo yum install -y gmp gmp-devel sudo yum install -y lapack lapack-devel sudo yum install -y suitesparse suitesparse-devel I have all pre-requisites listed on the current version of this page: https://urldefense.com/v3/__https://opm-project.org/?page_id=239__;!!GqivPVa7Brio!IYx9RG8p2DhjkX4SxQ879dH_7l5fuRJF0MAUx85mPu2C5E9zXsc6fYGHyQv_UFoFMQ$ I was able to build OPM Flow from the latest source using these pre-requisites. Thank you, Yogi Pandey, Ph.D. From: Joakim Hove [mailto:joakim.h...@gmail.com] Sent: Thursday, March 12, 2020 4:51 PM To: Yogi Pandey <yogi.pan...@oracle.com>; opm@opm-project.org Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Are you certain that you actually pick up the correct compiler - my guess is that you use the system compiler which is too old. Try: " source /opt/rh/devtoolset-7/enable" - wipe the build directory and rerun cmake. Joakim tor. 12. mar. 2020, 22:17 skrev Yogi Pandey <HYPERLINK "mailto:yogi.pan...@oracle.com%22yogi.pan...@oracle.com>: Hi Atgeirr, I've tried building 2019.10 from source. I encountered following error while building opm-common: [ 6%] Built target genkw [ 7%] Updating version information [ 7%] Built target update-version [ 7%] Building CXX object CMakeFiles/opmcommon.dir/src/opm/parser/eclipse/Parser/Parser.cpp.o /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37: error: expected template-name before ‘<’ token class InputStack : public std::stack< file, std::vector< file > > { ^ /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37: error: expected ‘{’ before ‘<’ token /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37: error: expected unqualified-id before ‘<’ token /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:320:71: error: invalid use of incomplete type ‘class Opm::{anonymous}::InputStack’ void InputStack::push( std::string&& input, boost::filesystem::path p ) { ^ /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:7: note: forward declaration of ‘class Opm::{anonymous}::InputStack’ class InputStack : public std::stack< file, std::vector< file > > { ^~~~~~~~~~ /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:348:20: error: field ‘input_stack’ has incomplete type ‘Opm::{anonymous}::InputStack’ InputStack input_stack; ^~~~~~~~~~~ /home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:7: note: forward declaration of ‘class Opm::{anonymous}::InputStack’ class InputStack : public std::stack< file, std::vector< file > > { ^~~~~~~~~~ make[2]: *** [CMakeFiles/opmcommon.dir/build.make:2728: CMakeFiles/opmcommon.dir/src/opm/parser/eclipse/Parser/Parser.cpp.o] Error 1 make[1]: *** [CMakeFiles/Makefile2:1962: CMakeFiles/opmcommon.dir/all] Error 2 make: *** [Makefile:141: all] Error 2 Following is the list of pre-requisites I have (not listing all commands here): -sudo yum install -y devtoolset-8 (for GCC-8.3.1) -sudo yum install -y gmp gmp-devel -sudo yum install -y lapack lapack-devel -sudo yum install -y suitesparse suitesparse-devel -openmpi-4.0.2 (built from source) -boost-1.72.0 (built from source) -cmake-3.16.4 (built from source) -parmetis-4.0.3 (built from source) -dune-2.6.0: dune-common, dune-geometry, dune-grid, dune-istl (built from source) -Zoltan-3.83 (built from source) OPM Flow module opm-common is built using following commads: 1) cmake -DCMAKE_BUILD_TYPE=Release -DUSE_MPI=ON -DUSE_OPENMP=ON -DBLAS_LIBRARIES=/usr/lib64 -DCMAKE_INSTALL_PREFIX=/usr/local .. 2) sudo make Am I missing any pre-requisite? Any help will be greatly appreciated. Thank you, Yogi Pandey, Ph.D. -----Original Message----- From: Yogi Pandey Sent: Wednesday, March 11, 2020 9:59 AM To: Atgeirr Rasmussen <HYPERLINK "mailto:atgeirr.rasmus...@sintef.no%22atgeirr.rasmus...@sintef.no>; HYPERLINK "mailto:opm@opm-project.org%22...@opm-project.org Subject: RE: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Thank you for the suggestion Atgeirr. I'll try out the previous release 2019.10. - Yogi -----Original Message----- From: Atgeirr Rasmussen [mailto:HYPERLINK "mailto:atgeirr.rasmus...@sintef.no%22atgeirr.rasmus...@sintef.no] Sent: Wednesday, March 11, 2020 6:46 AM To: HYPERLINK "mailto:opm@opm-project.org%22...@opm-project.org Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Hi Yogi, Lots of things have changed in Flow for the initialization in parallel recently. Could you try to check out the previous release (2019.10) and check if you see the same problems? Atgeirr ________________________________ Frå: Opm <HYPERLINK "mailto:opm-boun...@opm-project.org%22opm-boun...@opm-project.org> på vegne av Markus Blatt <HYPERLINK "mailto:mar...@dr-blatt.de%22mar...@dr-blatt.de> Sendt: onsdag 11. mars 2020 11:08 Til: HYPERLINK "mailto:opm@opm-project.org%22...@opm-project.org <HYPERLINK "mailto:opm@opm-project.org%22...@opm-project.org> Emne: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition step Hi Yogi, On Tue, Mar 10, 2020 at 02:15:19PM -0700, Yogi Pandey wrote: > Simulation is being run on 4 nodes with 32 processors each using following > command: > > mpirun --display-map -mca btl self -x UCX_TLS=rc,self,sm -x > HCOLL_ENABLE_MCAST_ALL=0 -mca coll_hcoll_enable 0 -x > UCX_IB_TRAFFIC_CLASS=105 -x UCX_IB_GID_INDEX=3 --cpu-set > 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26 > ,27,28,29,30,31,32,33,34,35 -np 144 --hostfile /etc/opt/rdma/hostfile > /mnt/nfs-share/etc/opm-flow/opm-simulators/build/bin/flow > --parameter-file=/mnt/nfs-share/data/norne/params > Out of curiosity. Is there a special reason why --cpu-set runs until 35 with 32 cpus per node? Might you be oversubscribing a node? Markus -- Dr. Markus Blatt OPM-OP AS _______________________________________________ Opm mailing list HYPERLINK "mailto:Opm@opm-project.org%22...@opm-project.org HYPERLINK "https://urldefense.com/v3/__https:/eur03.safelinks.protection.outlook.com/?url=https*3A*2F*2Fopm-project.org*2Fcgi-bin*2Fmailman*2Flistinfo*2Fopm&data=02*7C01*7CAtgeirr.Rasmussen*40sintef.no*7C92c439a2c2934fdb4f6308d7c5a44bcd*7Ce1f00f39604145b0b309e0210d8b32af*7C1*7C0*7C637195181746088987&sdata=DP6PfdO7olXefHaRUJk6jRg6*2Bmgthhr4lgZTV*2BJ7zIs*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUl!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOt1VkzszQ$%22https://urldefense.com/v3/__https://eur03.safelinks.protection.outlook.com/?url=https*3A*2F*2Fopm-project.org*2Fcgi-bin*2Fmailman*2Flistinfo*2Fopm&data=02*7C01*7CAtgeirr.Rasmussen*40sintef.no*7C92c439a2c2934fdb4f6308d7c5a44bcd*7Ce1f00f39604145b0b309e0210d8b32af*7C1*7C0*7C637195181746088987&sdata=DP6PfdO7olXefHaRUJk6jRg6*2Bmgthhr4lgZTV*2BJ7zIs*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUl!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOt1VkzszQ$ _______________________________________________ Opm mailing list HYPERLINK "mailto:Opm@opm-project.org%22...@opm-project.org HYPERLINK "https://urldefense.com/v3/__https:/opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOvYRA19MA$%22https://urldefense.com/v3/__https://opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOvYRA19MA$ _______________________________________________ Opm mailing list HYPERLINK "mailto:Opm@opm-project.org%22...@opm-project.org HYPERLINK "https://urldefense.com/v3/__https:/opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!LPMzbr5Ow3NStLVFpW15tbx536Kc7FiPkXxCNUM8osbXOx2MvUysLy3qiVjLah6Yzg$%22https://opm-project.org/cgi-bin/mailman/listinfo/opm _______________________________________________ Opm mailing list Opm@opm-project.org https://urldefense.com/v3/__https://opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!IYx9RG8p2DhjkX4SxQ879dH_7l5fuRJF0MAUx85mPu2C5E9zXsc6fYGHyQuKbyps9A$ _______________________________________________ Opm mailing list Opm@opm-project.org https://urldefense.com/v3/__https://opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!I_1R6MQvXO98YsD--aGpMqnti1zfa63_k1NpHzyDpC9xvLyKlJB9DRRyCv5nXXkamA$ _______________________________________________ Opm mailing list Opm@opm-project.org https://opm-project.org/cgi-bin/mailman/listinfo/opm
