Hi,

+Joe


Lincoln is right, you could spawn a VM, but it would be emulated without hw 
acceleration, so not really useful.

Reserving a single aarch64 node might be limiting though, Armband Fuel requires 
at least 6 nodes (1 jump server + 5 cluster nodes) right now.

Not sure what the mininum requirement for Compass4NFV + k8 are, but if you want 
to stick to Openstack, you should try reserving more nodes (afaik, there are 
enough available in UNH lab).


BR,

Alex

________________________________
From: opnfv-tech-discuss-boun...@lists.opnfv.org 
<opnfv-tech-discuss-boun...@lists.opnfv.org> on behalf of Lincoln Lavoie 
<lylav...@iol.unh.edu>
Sent: Friday, April 6, 2018 4:48:18 PM
To: Beierl, Mark
Cc: opnfv-tech-discuss@lists.opnfv.org; Parker Berberian
Subject: Re: [opnfv-tech-discuss] [armband] [fuel] Deployment file for Fuel on 
LaaS ARM

Hi Mark,

I think you can do a virtual deployment, which is 1 level of VMs.  But, I don't 
think you can host a VM on top of the open stack deployment (because that's 
nested).

Cheers,
Lincoln

On Fri, Apr 6, 2018 at 9:45 AM, Beierl, Mark 
<mark.bei...@dell.com<mailto:mark.bei...@dell.com>> wrote:
Hello, Parker, and thanks for the quick response.

So to be clear, I cannot deploy OPNFV on this system at this time?

Regards,
Mark

Mark Beierl
SW System Sr Principal Developer
Dell EMC | Cloud & Communication Service Provider Solution
mobile +1 613 314 8106<tel:1-613-314-8106>
mark.bei...@dell.com<mailto:mark.bei...@dell.com>

On Apr 6, 2018, at 09:43, Parker Berberian 
<pberber...@iol.unh.edu<mailto:pberber...@iol.unh.edu>> wrote:

Mark,

You have to be mindful that ARM does not support nested virtualization (and 
therefore virtual deployments with openstack are impossible). If Fuel does not 
support Kubernetes, then you may be out of luck until we can provide pharos 
POD's through LaaS.

Thanks,
Parker

On Fri, Apr 6, 2018 at 9:39 AM, Beierl, Mark 
<mark.bei...@dell.com<mailto:mark.bei...@dell.com>> wrote:
Hello, folks!

I have reserved an Arm server (arm41) in the LaaS and it's ready.  I am 
wondering if anyone has a configuration file for deploying Fuel on a single Arm 
server that I can borrow for this?

Or is there a better way to deploy Fuel on Arm, like re-using an existing 
Jenkins job?

Regards,
Mark

Mark Beierl
SW System Sr Principal Developer
Dell EMC | Cloud & Communication Service Provider Solution
mobile +1 613 314 8106<tel:1-613-314-8106>
mark.bei...@dell.com<mailto:mark.bei...@dell.com>






--
*******************************************************************************
Lincoln Lavoie
Senior Engineer, Broadband Technologies

[http://homeautomation.lavoieholdings.com/_/rsrc/1390068882701/unh-iol-logo.png]<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=CsROVeRb2MMZnSYARa9RdXeTTOZdd-weGwrgnEAGPZ9c7-pubt0BVhEGk5FByPLSEnH9XZh9bKigGlcsA8wezQfaSi-KNgxaHXb0YMM7H1EwrZsC3F2-h7610pC0dvDKA4lvCpdSXIdvsSadLtGtDwDbsNBVTY_Bkvevgvu4d4jIJp0QOjwIFeCv1ws1hJt_fVkPWMjhMzl1pa8vjf2PJ9RWDM-00xNZ9mggQ30tFK4>
www.iol.unh.edu<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=CsROVeRb2MMZnSYARa9RdXeTTOZdd-weGwrgnEAGPZ9c7-pubt0BVhEGk5FByPLSEnH9XZh9bKigGlcsA8wezQfaSi-KNgxaHXb0YMM7H1EwrZsC3F2-h7610pC0dvDKA4lvCpdSXIdvsSadLtGtDwDbsNBVTY_Bkvevgvu4d4jIJp0QOjwIFeCv1ws1hJt_fVkPWMjhMzl1pa8vjf2PJ9RWDM-00xNZ9mggQ30tFK4>
21 Madbury Rd., Ste. 100, Durham, NH 03824
Mobile: +1-603-674-2755
lylav...@iol.unh.edu<mailto:lylav...@iol.unh.edu>
[http://homeautomation.lavoieholdings.com/_/rsrc/1390068882701/facebook.png]<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=zGhpII7F5ErXzy8oUlI-H3jlbiUCA-_BHzzWbxyR1OS3Q2vxkeD_fetUw0QFvEDvG0ZE7gIxewjTwwIeYYyf_FPZ_xZwnTi80GyJlTeD_jiGpfcDmvpQ1Tdr77TPByjF5A69AkdXuYqmSx-BFNAqBiWS5qUbe02W7JRG21lQ3j0shzs0g-pBASqVz-U4h9ZxGK5GbK6WvThJ9wIWDmXT2kRR7ff1opp5siompkP2p-Q>
  [http://homeautomation.lavoieholdings.com/_/rsrc/1390068882701/twitter.png] 
<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=ZgygfqHLXZEiIpzALM0BiBInhTVv1dBG41Rl2AUhbTbKpQPawsYT2f--JUZjoUDjt7vnrzE4iPAGxQUsnFSx80iLOC9dujsyEgNl4JNMdhARc73BTHnemoIxZJzSrsiMKQe38NXMkkknpw775fwg5Oj0l-__9JtTJ8KqCkI1EIHD4DFpdOerI7ZXRldVd4kVeawWcwt25C-gt9dCtZ0dqnyBSqMsFy86DZbmCjwjL3Y>
   [http://homeautomation.lavoieholdings.com/_/rsrc/1390068882701/linkedin.png] 
<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=FR79osImIg3UtHFX8NU5uaCI3wR79ZsXZXVw4UIapT5KQFIa5wUZ7vcw8iPvEMBdSHu2cKhNbUzPajufDSrD3qKedSkTEueC5jOSY3a9E2UYuFD0MHUphMAZ62FOZCftkWvaVqb69jI-0rRRkl0EEHB0VQL9KL5IaOk8DRPHQW4VoeQVnIDkeFhEZL1VvHzFg7llfOprvP8D6nbYJQOWGSSJjZZJHGBhlBLngfWlVHGOFhLkXXFlUQDN4fHjO_92or7C9USIHiBfeqQhUBdqjQ>

Ars sine scientia nihil est! -- Art without science is nothing.
Scientia sine ars est vacua! -- Science without art is empty.

Broadband Forum Gfast Certified Product 
List<https://url10.mailanyone.net/v1/?m=1f4RjW-0002ZB-4t&i=57e1b682&c=GFkPf8WvH3d--o0YRTbD2qtQ-ydtdWdEPt9Q2s37i60hBXbfhdJsBsNftae7_mXXzUUkoeGV6uTBzizO_ofgz86cuDuUyG0FVEno7YcyrcB1ZyYiMAf9Srh1fWLVq1Mv_pwDq-Fz53EJZBQuGaEQ6A10Wk4FajC8X32SHWHP7_softPHLBNgL3ObrpoZso5lHQxyrPTslEBBXdbatLX2YCwvQ58YJOggBD86ejsQKXhOICeplKQ_cYtKoJS3wDz3zvpikCj20NSYaDA-U8oIPnonNmhCrvPiKlc946cU-dci7ok8i5eClrzGhI5pEksY>
*******************************************************************************
_______________________________________________
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

Reply via email to