Will work on these requirements and will ensure they are met before plugfest.
Regards, Sridhar K. N. Rao (Ph. D) Architect – SDN/NFV +91-9900088064 From: Alec Hothan (ahothan) <ahot...@cisco.com> Sent: Wednesday, May 23, 2018 11:37 PM To: Rao, Sridhar <sridhar....@spirent.com>; opnfv-tech-discuss@lists.opnfv.org Cc: 'ALFRED C 'MORTON (AL)'' <acmor...@att.com>; 'Trevor Cooper' <trevor.coo...@intel.com> Subject: [vsperf] [nfvbench] requiremenst for running nfvbench on vsperf pod12 As discussed in today’s weekly meeting, the requirement to run nfvbench on the vsperf pod12 are listed below. In a nutshell, the goal of this experiment is to see how different benchmark results are obtained on the same SUT using different tools: vsperf (with your choice of traffic gen) and nfvbench (trex). This will complement nicely Al’s presentation at the plugfest. Requirements: Install docker on the jump host where Trex is running (unless it is already installed) I can do that once I get access to the jump host (or anybody feel free to install docker) Docker is needed in order to run the nfvbench container. Run vsperf to bring up a packet path on the SUT This requires someone from vsperf team to stage the SUT properly. I would need to understand more about the looping mechanism used and its requirements on traffic packets (mainly how the L3 packets need to look like to loop back). Nfvbench currently sends UDP packets and supports configurable dest MAC and src/dest IP, src/dest port. Provide Trex ports information on the jump host I need to know which ports are wired to the SUT – and make sure no one else is mapped to it. Thanks Alec Spirent Communications e-mail confidentiality. ------------------------------------------------------------------------ This e-mail contains confidential and / or privileged information belonging to Spirent Communications plc, its affiliates and / or subsidiaries. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution and / or the taking of any action based upon reliance on the contents of this transmission is strictly forbidden. If you have received this message in error please notify the sender by return e-mail and delete it from your system. Spirent Communications plc Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United Kingdom. Tel No. +44 (0) 1293 767676 Fax No. +44 (0) 1293 767677 Registered in England Number 470893 Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United Kingdom. Or if within the US, Spirent Communications, 27349 Agoura Road, Calabasas, CA, 91301, USA. Tel No. 1-818-676- 2300
_______________________________________________ opnfv-tech-discuss mailing list opnfv-tech-discuss@lists.opnfv.org https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss