Hi, I am seeing an issue when using Opsview to monitor my Cisco ASA 5510's interfaces. After adding the interfaces to the SNMP tab of the host, Opsview complains that the interface statuses are "unknown" and that the interface is "not found!"
Steps to recreate: - Create a new host (Cisco ASA of some kind) - Click on the SNMP tab - Query the host using SNMP v2 - Check the boxes next to the interfaces you wish to monitor - Reload configuration - Check Host Status and you will see unknown statuses for all interfaces you just chose One thing I noticed is that the query returns interfaces names are extremely long, thanks Cisco.... Perhaps that is the main reason? Here is the output from the snmpwalk wrt interface names: IF-MIB::ifDescr.1 = STRING: Adaptive Security Appliance 'Null0' interface IF-MIB::ifDescr.2 = STRING: Adaptive Security Appliance '0' interface IF-MIB::ifDescr.3 = STRING: Adaptive Security Appliance 'folink' interface IF-MIB::ifDescr.4 = STRING: Adaptive Security Appliance 'Ethernet0/1' interface IF-MIB::ifDescr.5 = STRING: Adaptive Security Appliance 'Ethernet0/2' interface IF-MIB::ifDescr.6 = STRING: Adaptive Security Appliance 'shared' interface IF-MIB::ifDescr.7 = STRING: Adaptive Security Appliance 'management' interface IF-MIB::ifDescr.8 = STRING: Adaptive Security Appliance 'Internal-Data0/0' interface IF-MIB::ifDescr.9 = STRING: Adaptive Security Appliance 'GigabitEthernet1/0' interface IF-MIB::ifDescr.10 = STRING: Adaptive Security Appliance 'GigabitEthernet1/1' interface IF-MIB::ifDescr.11 = STRING: Adaptive Security Appliance 'GigabitEthernet1/2' interface IF-MIB::ifDescr.12 = STRING: Adaptive Security Appliance 'GigabitEthernet1/3' interface IF-MIB::ifDescr.13 = STRING: Adaptive Security Appliance 'Internal-Data1/0' interface IF-MIB::ifDescr.14 = STRING: Adaptive Security Appliance 'Virtual254' interface IF-MIB::ifDescr.15 = STRING: Adaptive Security Appliance 'outside' interface IF-MIB::ifDescr.16 = STRING: Adaptive Security Appliance 'prod-inside' interface Here is are the errors I get in the interface status information: UNKNOWN - Interface Adaptive Security Appliance folink interface not found! UNKNOWN - Interface Adaptive Security Appliance outside interface not found! UNKNOWN - Interface Adaptive Security Appliance prod-inside interface not found! UNKNOWN - Interface Adaptive Security Appliance shared interface not found! -JB _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
