That's it, that is why it's broken, as user nagios it does sort of fail. I'm hoping there is an easy fix for this that I am overlooking.
[nag...@whq-ops-01 libexec]$ ./check_snmp_linkstatus -H 172.16.2.1 -C supersecret -I GigabitEthernet5/2 ; echo $? WARNING: Running from command line. This could change statistics for the next run from Nagios DBD::SQLite::db do failed: attempt to write a readonly database at ./check_snmp_linkstatus line 547. DBD::SQLite::db do failed: attempt to write a readonly database at ./check_snmp_linkstatus line 481. OK - GigabitEthernet5/2 (Internet1) is up, throughput (in/out) 3.33 Mbps/2.92 Mbps, 3.5%/3.07%|throughput_in=3502232b throughput_out=3070096b 0 Thanks, Joe From: [email protected] [mailto:[email protected]] On Behalf Of Josh Brown (Mailing List) Sent: Tuesday, February 23, 2010 5:53 PM To: Opsview Users Subject: Re: [opsview-users] SNMP Interface Out of Bounds Error Oh wait! I bet I know why... I bet this command stores persistant information in a temp file. Since you are running as root it's probably working, make sure this works as the user Nagios. -JB On Feb 23, 2010, at 2:45 PM, Joe Goldberg wrote: Thank you for the reply, from the command line here is what I get. It looks okay to my untrained eye. [r...@whq-ops-01 libexec]# ./check_snmp_linkstatus -H 172.16.2.1 -C supersecret -I GigabitEthernet5/2 WARNING: Running from command line. This could change statistics for the next run from Nagios OK - GigabitEthernet5/2 (Internet1) is up, throughput (in/out) 4.96 Mbps/2.2 Mbps, 5.2%/2.3%|throughput_in=5205328b throughput_out=2309328b Thanks, Joe From: [email protected] [mailto:[email protected]] On Behalf Of Josh Brown (Mailing List) Sent: Tuesday, February 23, 2010 5:30 PM To: Opsview Users Subject: Re: [opsview-users] SNMP Interface Out of Bounds Error In my experience that is usually because of a script error, such as a perl dependency or something like that. Can you try and run the command manually from your opsview server? The output of that might give some insight into the issue. Perhaps, there is some Perl library that is not installed. -JB On Feb 23, 2010, at 2:14 PM, Joe Goldberg wrote: I have version 3.5.2 that I just did a clean install on today via yum on a CentOS 5 64 Bit machine. I am configuring it to monitor the Interfaces of a Cisco router via SNMP and they are all showing up as down with the error "(Return code of 255 is out of bounds)". I have another OpsView install at version 2.12.4 (I know it's old but it has been very reliable) that is doing the same check with no problems. I saw a post to try the check_snmp_linkstatus file at http://svn.opsview.org/opsview/trunk/opsview-core/nagios-plugins/check_s nmp_linkstatus. I tried it and I get the same error. Any assistance would be appreciated. Thanks, Joe This email and any attachment(s) is for the intended recipient only and may be confidential. If you are not the intended recipient, please delete this e-mail and advise the sender immediately. Unauthorized use or distribution is prohibited. _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
_______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
