Can we see the content of opsview.conf on the master and the opsview-slave.conf of the slave?
Think it's in /usr/local/nagios/etc/ somewhere. Thanks, ----- Original Message ----- From: "Simone Felici" <[email protected]> To: "Opsview Users" <[email protected]> Sent: Tuesday, March 9, 2010 8:51:37 AM Subject: [opsview-users] Problems after setting up reverse tunnel Hello, I've followed the instructions on setting up reverse tunnel between slave and master OPSView servers, but now the server is isolated and there is still the following problem: SLAVE CRITICAL - NSCA problem - status code: 2 - restarting tunnel Between slave<->master, if I'm logged in as "nagios" I can connect in SSH from server to server without password and in slave the command still hangs, as it should. [nag...@opsview-slave ~]$ ssh -N -R 25801:127.0.0.1:22 172.18.30.31 ssh sessions between master/slave are set-up correctly: tcp 0 1 172.18.30.32:43144 172.18.18.31:22 SYN_SENT 16266/ssh on (14.64/3/0) tcp 0 0 172.18.30.32:50710 172.18.30.31:22 ESTABLISHED 26965/ssh keepalive (4179.39/0/0) Master .31, slave .32. All hosts monitored by the slave are in stale. Befor setting up reverse tunnel all was ok. What could I check? Thank's Simon _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
_______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
