Fixed one issue. I had actually installed the SmoothWall virtual
appliance the same night which I hadn't realised has a DHCP service
configured by default whichexplains the 192.168.58.199 address. I'm
still having the same issue though with my OpsView virtual appliance in
that I set the static IP details using netconf and then sometime later
the IP address will change to that of an IP in my DHCP scope. Is there
anything else I need to do other than running netconf to set a static IP
address and make it stick?
On 2010-05-19 01:20, Dominic Ryan wrote:
> Hi All,
>
> I downloaded the OpsView VM Applicance and have installed it without
> issue, however everytime I set the static IP details in the console
> using the netconf command the IP address is reverting to 192.168.58.199
> every few hours. This is not even a range hosted by any DHCP service in
> my network, and I was just wondering if anyone had any idea why this
> might be? The IP address I'm assiging is outside all DHCP scopes and no
> other network device is using it.
>
> Also, just wondering if there is a plugin available that would allow me
> to easily graph any Windows Performance Monitor counters? We currently
> use Windows Performance Monitor heavily for monitoring resources, and
> any consolidated monitoring solution I put forward to my boss will need
> to be able to do this.
>
> Really appreciate any advice you can give.
>
> Regards,
>
> Dominic Ryan
>
>
_______________________________________________
Opsview-users mailing list
[email protected]
http://lists.opsview.org/lists/listinfo/opsview-users
