Ah ok Must be something else on my end. Thanks all - I'll go back to the drawing board.
On 31 Aug 2010, at 20:36, Ton Voon wrote: > > On 31 Aug 2010, at 13:41, Tom Elliott - Gyron wrote: > >> Don’t know if I’m misunderstanding something, but I’m finding that when >> trying to walk a host from within the Opsview web interface, the community >> isn’t passing from the host config through to the service check create/edit >> page where I’m trying to do the walk >> >> tomelli...@opsview:~$ ps wwwU nagios | grep walk >> 22270 ? S 0:00 /usr/bin/snmpwalk -v 1 -c xxx.xxx.xxx.65 >> .iso >> tomelli...@opsview:~$ >> >> Am I missing something, or is this expected? > > You are doing it right. Opsview should be generating the command correctly - > we have lots of tests around this area. > > I've just tried on snmpwalk Net-SNMP version 5.4.1 and I get the same command > above. The execute strips the community name from the ps output so a user > cannot find the community string. > > What's the problem? > > Ton > > <ATT00001..c> -- Kind regards, Tom Elliott Gyron Internet Ltd mail: [email protected] web: http://gyron.net/ tel: 0845 888 6900 fax: 0845 888 6910 24 hour customer support: 0845 888 6999 This message may be private and confidential. If you have received this message in error, please notify us and remove it from your system. Gyron may monitor email traffic data and the content of email for the purposes of security and staff training. Gyron Internet Ltd is a limited company registered in England and Wales. Registered number: 4239332. Registered office: 3 Centro, Boundary Way, Hemel Hempstead, HP2 7SU. VAT reg no 804 2532 63. Gyron is a registered trademark. _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
