Thanks to both Simon and Paul for the assistance.  My issue is now resolved.
It turns out the nagios user on my slave was not sourcing its profile
correctly.  Once I fixed that issue everything cleared up.

Thanks,
Craig



From: Paul <[email protected]>
Reply-To: Opsview Users <[email protected]>
Date: Fri, 24 Jun 2011 12:15:40 +0200
To: "[email protected]" <[email protected]>
Subject: Re: [opsview-users] Slave service results stale

 I have seen rights modified on the opsview_slave.log (IIRC) back to
root.root which caused the slave to remain "in trouble"

 

Recent happenings result in slave error from the master, where a restart of
the tunnel (ps -ef | grep ssh, pick the right ip of the slave and kill -9)
fixed the problem.

 

I guess this is some kind of intermediate networking issues which causes
each side to think the tunnel is still up.

 

Any chance the slave hasn't checked the service? reschedule the next check
of the stale service and see what happens?

 

hth

Paul
 
> -----Original message-----
> To: [email protected];
> From: Simone Felici <[email protected]>
> Sent: Fri 24-06-2011 09:17
> Subject: Re: [opsview-users] Slave service results stale
> 
> Maybe you've still tested it, but in case, take a look on the wiki:
> 
> http://docs.opsview.com/doku.php?id=opsview-community:staleresults
> 
> There are some suggestion and points to check. In my case there was an issue
> on the slave, executing
> as nagios user: /usr/local/nagios/bin/retrieve_opsview_info
> NRD was in stale and no results sent to the master: high backlog values. There
> are steps to test the
> ssh tunnel too which is important 'cause the informations are travelled into
> it :)
> 
> You'll be able to simulate all steps OPSview should follow in case of a
> working scenario.
> 
> Cheers,
> 
> Simon
> 
> Il 23/06/2011 18:16, Craig Pendleton ha scritto:
>> > Thanks for the suggestion Simon, but that hasn't worked for me.  A reboot
>> of
>> > both master and slave haven't cleared it up either.   There must be a way
>> to
>> > get these checks working correctly again.  Any other suggestions out there?
>> >
>> >
> _______________________________________________
> Opsview-users mailing list
> [email protected]
> http://lists.opsview.org/lists/listinfo/opsview-users


_______________________________________________
Opsview-users mailing list
[email protected]
http://lists.opsview.org/lists/listinfo/opsview-users

_______________________________________________
Opsview-users mailing list
[email protected]
http://lists.opsview.org/lists/listinfo/opsview-users

Reply via email to