Hi, I have been trying to setup my own "private" directory servers, but without much luck. Does anybody know if there's a how-to or some other information about how to setup your own directory server somewhere?
I have 3 computers, each running a directory server. They all do *NOT* talk to the 5 authoritative directory servers (moria1, moria2, tor26, etc...). The config file I used is below, with some info commented out SocksPort 0 Log debug stdout ORPort 10000 ORListenAddress ****** NickName DS1 AssumeReachable 1 ExitPolicy accept *:* DirPort 9000 DirListenAddress ******* DirPolicy accept *:* FetchServerDescriptors 0 FetchHidServDescriptors 0 AuthoritativeDirectory 1 ContactInfo blabla DirServer ******:9000 Fingerprint1 DirServer ******:9000 Fingerprint2 DirServer ******:9000 Fingerprint3 I start up all 3 directory servers (almost simultaneously). They will start up fine, then at some point they will start complaining about May 18 20:45:31.606 [debug] circuit_remove_handled_ports(): Port 80 is not handled. May 18 20:45:31.606 [info] circuit_predict_and_launch_new(): Have 0 clean circs (0 internal), need another exit circ. Sometimes, I might also get May 18 20:40:26.492 [notice] Our directory information is no longer up-to-date enough to build circuits. (Not enough servers seem reachable -- is your network connection down?) All three directory servers can talk to each other due to May 18 02:02:16.924 [debug] connection_dir_client_reached_eof(): Received response from directory server '********:9000': 200 "OK" If anybody want the full logs, let me know. Thanks for any help, Eric