When tor first starts up as a relay server and directory mirror on my
machine, it shows success for DirPort first and then for ORPort. Upon
finding ORPort reachable, it publishes the server descriptor.
But when a change of IP address is detected and tor checks again for
reachability, it shows success for ORPort first, publishes a descriptor
showing DirPort as 0, and then shows success for DirPort, but does not
publish an updated descriptor showing a non-zero DirPort.
My questions are:
1) why does the order of reachability completion differ between
the two situations?
2) when DirPort is found to be reachable after ORPort, why is
an updated descriptor showing the value of DirPort not
immediately published?
Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet: bennett at cs.niu.edu *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good *
* objection to the introduction of that bane of all free governments *
* -- a standing army." *
* -- Gov. John Hancock, New York Journal, 28 January 1790 *
**********************************************************************
