Hi Bill,

Is 200GB the total size of the database?  If so,
have you considered only loading "new" data into
production?  

Paul

--- Bill Becker <[EMAIL PROTECTED]> wrote:
> Hello,
> 
> Some data warehousing questions:
> 
> We are considering a setup where we have two
> separate machines,
> 1 for doing the ETL
> (ExtractTransformLoad)processing, and 1 for
> the production machine. Our env is Oracle 8.1.6
> on Sun.
> The main idea is to insulate the production
> machine from the effects
> of ETL processing; the only impact ETL would
> have on the production
> machine would be when the ETL has completed and
> the data is copied
> over to the production machine, which leads me
> to my question:
> what methods have been used to minimize the
> time needed for this copy step?
> 
> The amount of data to be transferred would be
> around 200GB, but expected
> to grow very fast.
> Both machines would be part of an existing
> ethernet network, and we've
> considered the following:
> 1) Just do the transfer over the existing
> ethernet network (figure about
>    150GB/hour)
> 2) Position the machines close to each other,
> and run a short (6-foot or less)
>    cable between serial ports or parallel ports
> on both machines
> 3) Set up a separate network; install an
> ethernet card in each machine, and
>    connect them with ethernet
> 4) Go to a "disk-farm" setup - don't know a lot
> about this, but both machines
>    would access subsets of a large shared disk
> array (is this EMC? or other vendors?)
> 
> The consensus is that fiberoptic, although
> faster, would be a waste since
> then the limiting factor would be disk read and
> write speeds.
> 
> Anyway, I would appreciate any
> comments/suggestions regarding the above,
> especially #4, and any other approaches.
> Thanks to any responders.
> -- 
> Please see the official ORACLE-L FAQ:
> http://www.orafaq.com
> -- 
> Author: Bill Becker
>   INET: [EMAIL PROTECTED]
> 
> Fat City Network Services    -- (858) 538-5051 
> FAX: (858) 538-5051
> San Diego, California        -- Public Internet
> access / Mailing Lists
>
--------------------------------------------------------------------
> To REMOVE yourself from this mailing list, send
> an E-Mail message
> to: [EMAIL PROTECTED] (note EXACT spelling
> of 'ListGuru') and in
> the message BODY, include a line containing:
> UNSUB ORACLE-L
> (or the name of mailing list you want to be
> removed from).  You may
> also send the HELP command for other
> information (like subscribing).


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/
-- 
Please see the official ORACLE-L FAQ: http://www.orafaq.com
-- 
Author: Paul Parker
  INET: [EMAIL PROTECTED]

Fat City Network Services    -- (858) 538-5051  FAX: (858) 538-5051
San Diego, California        -- Public Internet access / Mailing Lists
--------------------------------------------------------------------
To REMOVE yourself from this mailing list, send an E-Mail message
to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in
the message BODY, include a line containing: UNSUB ORACLE-L
(or the name of mailing list you want to be removed from).  You may
also send the HELP command for other information (like subscribing).

Reply via email to