*Dear candidate,* *We have an urgent opening for Sr. Network Engineer and I have sent you a job description ,Please go through it and let me know if you are comfortable with it and also send me your consultant's updated resume ASAP. *
*Title:- Sr. Network Engineer* *Location: Huston|TX| * *Phone and skype.* *Duration:- 2 months contract * *Estimated Start Date: **Monday January 11th * *Hours: 8AM-5PM* *Days Of Work: Monday-Friday* *Travel: 100%* *Design & Implementation of WAN Network Design Standards * *Qualifications:* · *Must pass a criminal background check before starting* · *MUST have router/switch experience- CCNP level Network experience – (Installing and troubleshooting Cisco wireless controllers 5500 or 2200 series); Cert preferred, but if not, at least that level of experience * · *MUST have Wireless Experience* · *LAN/WAN Background* · *Must be willing to travel 75%-100% NO EXCEPTIONS* · *Must have experience with wireless site surveys; it is preferred if have experience or knowledge doing this with Airmagnet* · *Preferred wireless:* · *Experience upgrading a Cisco wireless controllers* · *Experience upgrading the IOS on the wireless controller* · *Experience or familiar with flexconnect groups* · *Upgrading AP firmware* · *Removing and adding SSIDs on a Cisco controller (SSID is a unique identifier that wireless networking devices use to establish and maintain wireless connectivity)* · *Must have excellent communication and customer services skills. * *1.1 Specific Objectives WAN Transport Network Design Standards * · *Implement the following WAN block architecture standards and best practices: * · *MPLS configurations * · *OSPF configurations * · *BGP configurations * · *Interface configurations * * Scope of Services and Technical/Functional Requirements * *Review WAN Transport Network Design Standards * · *Review current configurations of all devices at the CORE locations as well as remote sites (up to 600 devices) * · *Current OSPF configurations * · *Current BGP configurations * · *Current MPLS configurations * · *Current Interface configurations * *Plan * *WAN Transport Network Design Standards * · *Conduct planning meetings and develop design implementation plan * · *Plan installation resources at each location * · *Plan change windows, schedule and remote configuration support strategy * · *Work with Client to discuss design features, options and industry best practices for a successful design and implementation * *Design WAN Transport Network Design Standards* · *Prepare configuration standards for the following areas: * · *MPLS configurations * · *Set a consistent router ID for LDP adjacency * · *Configure session to maintain LDP state (targeted session) until link is restored (finite amount of time) * · *Minimizes packet loss * · *Suspend routing across link until LDP state is active to minimize packet loss * · *Limit per VRF usage and prevent misconfiguration from using too much router memory * · *RD sets VPNv4 address uniqueness * · *Provided allocation scheme to allow multi-homing to site routes * · *Neighbor authentication between LDP peers * · *Log neighbor state changes to buffer and syslog servers * · *OSPF configurations * · *Set the OSPF link bandwidth values to ensure traffic is routed based on differences in link bandwidth * · *Use LSA Filter to minimize OSPF RIB entries * · *Minimize LSA generation by summarizing routes that will be imported into OSPF * · *Configures the default operation in OSPF to prevent interfaces from forming adjacencies * · *Sets OSPF to use partial SPF calculation meant to reduce processing overhead * · *LSA generation/reception tweaking and SPF intervals to allow for faster convergence and increased stability * · *Failure detection mechanism that provides protocol independent convergence (BFD) * · *BGP configurations * · *Adjust the input queue on each RR interface to process control packets from large scale growth of PE * · * Neighbor authentication for iBGP session * · *Expand the RR topology to manage network growth * · *Minimize RR configuration and allow for more flexibility in making changes * · *Protocol to configure on edge BGP sessions for failure detection and fast failover * · *Interface configurations * · *Maximize the interface MTU so that the Maximum Segment Size (MSS) parameter for BGP sessions can be increased * · *Improves BGP session performance * · *Minimize LSA generation by suppressing flapping links * · *Dampening half-life can be adjusted to suite observed link flap intervals * · *Improve convergence by immediate link removal * · *Implement standards identified above into core routers/switches as well as remote site routers/switches in the CNP Transport WAN network **Implement WAN Transport Network Design Standards * · *Design and implement OSPF, MPLS, BGP, and interface standards on the system of the PE 6500 switches closest to the Client CORE * · *Design and implement OSPF, MPLS, BGP, and interface standards on the system of the PE routers closest to the Client remote LAN (up to 600 devices) Operate * · *WAN Transport Network Design Standards * · *Verify the implemented configurations * *Rohit Bhasin |* Technical Recruiter | Apetan Consulting LLC Tel: 201-620-9700* |121| Fax:2015266869 | 72 Van Reipen Avenue # 255 Jersey City, NJ 07306 ro...@apetan.com| www.apetan.com *“Forget all the reasons why it won’t work and believe the one reason it will work**"* <http://www.facebook.com/Apetanconsulting> <http://www.linkedin.com/company/apetan-consulting-llc?trk=top_nav_home> <http://twitter.com/ApetanLLC> *Disclaimer:* We respect your Online Privacy. This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are not interested in receiving our e-mails then please reply with a "REMOVE" in the subject line at rem...@apetan.com and mention all the e-mail addresses to be removed with any e-mail addresses, which might be diverting the e mails to you. We are sorry for the inconvenience. -- You received this message because you are subscribed to the Google Groups "OracleD2K" group. To unsubscribe from this group and stop receiving emails from it, send an email to oracled2k+unsubscr...@googlegroups.com. To post to this group, send email to oracled2k@googlegroups.com. Visit this group at https://groups.google.com/group/oracled2k. For more options, visit https://groups.google.com/d/optout.
