Hi Bernard, On Saturday 23 July 2005 19:38, Bernard Li wrote: > Hi Erich:
> Yes, the Ganglia issue you are seeing is a known issue. I couldn't get > multicast to work when you have two nics. It works with unicast but I'll > have to update the script to use that. Also, I'm not sure if there are > implications to using unicast vs multicast on the cluster... Unicast saves bandwidth but spoils the redundancy. Did you try setting the route for the multicast target address through eth0? > It will probably work if you just turn off (ifdown) eth1 - but I will try to > check in the fix to use unicast in the weekend. That is not an option. eth1 is needed. > About the hardware.lst... I suppose you are having problems because the > generated modprobe.conf is incorrect? Yes. Actually that could be detected at install time... Regards, Erich ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
