Hi Allan: I can no longer re-produce the DHCP issue on fc6-i386, perhaps you can pastebin your oscarinstall.log(s) and /etc/dhcpd.conf so that I can have a look?
So basically your node tries to network boot, but it could not find a dhcp server, correct? Is dhcpd running? Cheers, Bernard On 2/10/07, Bernard Li <[EMAIL PROTECTED]> wrote: > Hi Allan: > > I am not subscribed to oscar-users, so please subscribe to oscar-devel > (see below) and continue the discussion here: > > https://lists.sourceforge.net/lists/listinfo/oscar-devel > > Regarding your DHCP issue, I assume you have defined more than 1 > clients right? So far I have only tested with one client, but I have > seen issues where DHCP won't work if there are more than 1 clients > defined. I'll investigate this and get back to you. > > Regarding building RPMs, there is a very brief documentation in the wiki: > > http://svn.oscar.openclustergroup.org/trac/oscar/wiki/DistroSupport > > Essentially you should be able to run the build_oscar_rpms script and > the RPMs will be built for you. Why don't you try that and let us > know how it goes. > > BTW, I'm pasting the following from oscar-users for completeness: > > --- > Hi Bernard, > I tried the Feb 9 2007 nightly build and successfully got the oscar > wizard gui. I went so far as to step 6 Setup Network on FC6 i386 even > though all my machines are intel dual core em64t. > I have two intel e1000 NIC cards one a PCI express one also intel built > onto the P5B-VM DO motherboard and the other a PCI pro1000/GT intel on > a pci slot. My intention is to see if I can use the current beta ver of > Open Mpi ver 1.2 to use 2 gigabit nics to get a better bandwith(total) > over tcp, btl measuring using netpipe. I tried a pxe boot of one of > these P5B-VM DO motherboard nodes in step six of the wizard and it > wwboots fine until DHCPDISCOVER when it fails to see the Master node > dhcpd server. THe info in /etc/dhcpd.conf is correct for this node. Can > you help analyse this problem with the failure of connection with the > dhcp master server with the node trying and giving up? I am using > Netgear (2) CS724T switches. > Can you also post a how to as mentioned below for support for FC6 x86_64? > Thank you, > Any help will be greatly appreciated! > Regards, > Allan > --- > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
