Hi Bernard,
Yes I have more than one client. Two P5B-VM DO motherboards with
dual intel e1000 gigabit eth cards one built in and another pci on a pci
slot. the rest of the 12 are asrock 775i65G all-in-one motherboards with
two gigabit pci on pci slots ethernet cards, one intel e1000 and another
a d-link dge530t(skge).
I can boot from an asrock mobo client and it installs and shutsdown
without any problems. Just this P5B-VM DO mobo client gives up with a
dhcp error. I think it has to do with both cards on the client being
intel e1000 with pxe boot roms. But i also tried unplugging the eth
cable from the onboard intel eth port and the same problem occurred
I have installe FC6 x86_64 on a another machine asrock dual-vista and I
am trying to build the rpms as you mentioned earlier. It terminates very
fast afet printing /opt/oscar.
As you mentioned below where would i find the built rpms?
Thank you for your help,
Regards,
Allan Menezes.
Hi Allan:
I am not subscribed to oscar-users, so please subscribe to oscar-devel
(see below) and continue the discussion here:
https://lists.sourceforge.net/lists/listinfo/oscar-devel
Regarding your DHCP issue, I assume you have defined more than 1
clients right? So far I have only tested with one client, but I have
seen issues where DHCP won't work if there are more than 1 clients
defined. I'll investigate this and get back to you.
Regarding building RPMs, there is a very brief documentation in the wiki:
http://svn.oscar.openclustergroup.org/trac/oscar/wiki/DistroSupport
Essentially you should be able to run the build_oscar_rpms script and
the RPMs will be built for you. Why don't you try that and let us
know how it goes.
BTW, I'm pasting the following from oscar-users for completeness:
---
Hi Bernard,
I tried the Feb 9 2007 nightly build and successfully got the oscar
wizard gui. I went so far as to step 6 Setup Network on FC6 i386 even
though all my machines are intel dual core em64t.
I have two intel e1000 NIC cards one a PCI express one also intel built
onto the P5B-VM DO motherboard and the other a PCI pro1000/GT intel on
a pci slot. My intention is to see if I can use the current beta ver of
Open Mpi ver 1.2 to use 2 gigabit nics to get a better bandwith(total)
over tcp, btl measuring using netpipe. I tried a pxe boot of one of
these P5B-VM DO motherboard nodes in step six of the wizard and it
wwboots fine until DHCPDISCOVER when it fails to see the Master node
dhcpd server. THe info in /etc/dhcpd.conf is correct for this node. Can
you help analyse this problem with the failure of connection with the
dhcp master server with the node trying and giving up? I am using
Netgear (2) CS724T switches.
Can you also post a how to as mentioned below for support for FC6 x86_64?
Thank you,
Any help will be greatly appreciated!
Regards,
Allan
---
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Oscar-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-devel
