Jerome, If the device driver isn't being loaded, then yes, the problem you have shown will occur.
Do you know what device will be presented to the system once the driver is loaded? -- David N. Lombard My comments represent my opinions, not those of Intel Corporation. >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:oscar-users- >[EMAIL PROTECTED] On Behalf Of Lefevre Jerome >Sent: Thursday, January 20, 2005 9:21 PM >To: [email protected] >Subject: [Oscar-users] Suite : FC 2 i386 : Client install + systemimager > >Dear Forum, > >Ok, Could confirm my impression : > >There is a bad issue, because Systemimager don't load in ramdisk the >Silicon module. >There is same issue like mine here : >http://clustering.foundries.sourceforge.net/comments.pl?sid=4907 > >If i decompress boel-binaries.tar.gz and look inside modules directory, i >don't see the sii6514.o (the module for SIL3114 Sata onboard S2885 Tyan !! >) > >Oulala ! > >If i read SystemImager Doc >http://www.systemimager.org/doc/html/c692.html#AEN881, topic " How do I add >a driver for a special card to the autoinstall kernel?", i must to build >from source this module against kernel 2.4.25. > >But there is no source for sii6514 !! just binary built against other >Kernel !! . So, I wrote to Tyan Support and hope they send me the source. > >Please, Could you tell me if my diagnostic is right and tell me how to >process ? (TIP, Warnings etc...). Many thanks. > >Good WE. >Bye, > >Jerome > > > > > > > > > > > >A 14:30 21/01/2005 +1100, Lefevre Jerome a �crit : > >>I 'd look some post about this topic, and play around with systemimager >>and drivers include in my image. >> >>For my SCSCI disk, the controler is Silicon. If i look inside >> >>/var/lib/systemimager/images/2005_img_1/lib/modules/2.6.5.1.358smp/kernel/ >drivers/scsi/ >>, i find : >> >>3w-xxxx.ko >>a100u2w.ko >>aacraid >>advansys.ko >>aha152x.ko >>aha1542.ko >>aic7xxx >>aic7xxx_old.ko >>ata_piix.ko >>BusLogic.ko >>fdomain.ko >>gdth.ko >>imm.ko >>in2000.ko >>ips.ko >>libata.ko >>megaraid.ko >>osst.ko >>pcmcia >>ppa.ko >>qla1280.ko >>qla2xxx >>qlogicfas.ko >>qlogicisp.ko >>sata_promise.ko >>sata_sil.ko <<< Here is my module >>sata_sis.ko >>sata_svw.ko >>sata_via.ko >>sata_vsc.ko >>scsi_mod.ko >>scsi_transport_fc.ko >>scsi_transport_spi.ko >>sd_mod.ko >>sg.ko >>sr_mod.ko >>st.ko >>sym53c8xx_2 >> >> >>all seems OK. >>But why this module is not loaded on my node at boot time ? >> >> >>More info : >>--------------- >>On my node, i test Fedora Installation, in order to verify disc presence >>and integrity, and it's OK, after sata_sil loading. >> >>Best regards >> >>J�r�me >> >> >> >>A 11:35 21/01/2005 +1100, Lefevre Jerome a �crit : >>>I suspect a SCSCI module issue, because we don't see message about our >>>scsi disk detection in the install step. >>> >>>Do you think i must to recompil the kernel with the SCSI module (in hard) >?. >>> >>>Is there another trick ? How to load a module with SIS ? >>> >>>Best regard. >>> >>>J�r�me >>> >>> >>>A 11:07 21/01/2005 +1100, Lefevre Jerome a �crit : >>> >>>>I read p 15 and 16 in the Install Howto about DISKODER : >>>> >>>>I 'd make change the diskorder sequence in the Kernel section of >>>>/tftpboot/pxelinux.cfg/default. Now, this is >>>> >>>>DISKORDER = sd,hd,cciss,ida,rd >>>> >>>>But, after node reboot, i see always on my node console: >>>>DISKORDER = hd,sd,cciss,ida,rd >>>>and the same issue with disk0 >>>> >>>>Any idea ?? >>>> >>>> >>>> >>>>A 10:46 21/01/2005 +1100, Lefevre Jerome a �crit : >>>>>Ok, >>>>> >>>>>Now, after setup the network, we are trying to install image on our >>>>>node by PXE. >>>>> >>>>>On the console, we see some verification about image and communication, >>>>>without complaint. >>>>>But in the hard install pre-processing, SIS don't see hard disk. >>>>> >>>>>The log is : >>>>> >>>>>get-arch >>>>>DISKORDER >>>>>enumerate_disks >>>>>DISKS=0 >>>>>undefined:Disk0 >>>>>Killing off running processes >>>>> >>>>>Any idea >>>>> >>>>>More info : >>>>>------------ >>>>> >>>>>Disk on node is SATA 80 GB, with the same configuration like front-end. >>>>>We configre Kernel_picker, with default and with the same kernel which >>>>>is installed on the front-end,; but without success. We use the scsi >>>>>partition file in the oscarsample directory >>>>> >>>>>Best regard >>>>> >>>>>Jerome >>>>> >>>>> >>>>> >>>>>------------------------------------------------------- >>>>>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >>>>>Tool for open source databases. Create drag-&-drop reports. Save time >>>>>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >>>>>Download a FREE copy at http://www.intelliview.com/go/osdn_nl >>>>>_______________________________________________ >>>>>Oscar-users mailing list >>>>>[email protected] >>>>>https://lists.sourceforge.net/lists/listinfo/oscar-users >>>> >>>> >>>> >>>> >>>>------------------------------------------------------- >>>>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >>>>Tool for open source databases. Create drag-&-drop reports. Save time >>>>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >>>>Download a FREE copy at http://www.intelliview.com/go/osdn_nl >>>>_______________________________________________ >>>>Oscar-users mailing list >>>>[email protected] >>>>https://lists.sourceforge.net/lists/listinfo/oscar-users >>> >>> >>> >>> >>>------------------------------------------------------- >>>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >>>Tool for open source databases. Create drag-&-drop reports. Save time >>>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >>>Download a FREE copy at http://www.intelliview.com/go/osdn_nl >>>_______________________________________________ >>>Oscar-users mailing list >>>[email protected] >>>https://lists.sourceforge.net/lists/listinfo/oscar-users >> >> >> >> >>------------------------------------------------------- >>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >>Tool for open source databases. Create drag-&-drop reports. Save time >>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >>Download a FREE copy at http://www.intelliview.com/go/osdn_nl >>_______________________________________________ >>Oscar-users mailing list >>[email protected] >>https://lists.sourceforge.net/lists/listinfo/oscar-users >> > > > > >------------------------------------------------------- >This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >Tool for open source databases. Create drag-&-drop reports. Save time >by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >Download a FREE copy at http://www.intelliview.com/go/osdn_nl >_______________________________________________ >Oscar-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/oscar-users ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Oscar-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-users
