From: Amit Vyas > >I am stuck in following problems > >1. eth0 in any client node is not active when the clients boot. > but is active when i issue insmod e100. so also need to mount > /home manually. is where should i enter configuration so that it >eth0 loads with subsequent boot.
Does /etc/modules.conf have an alias for eth0 to e100? Is eth0 set connect at boot time in /etc/sysconfig/network-scripts/ifcfg-eth0? >2. various tests mainly related to LAM/MPI , PBS , MPI (via PBS), PVM >(via PBS) are failing. Do you know if this is network related? Node? >3. when i tried as a user from master node " lamboot my_cluster " >returns an error about "xauth X11 forwarding .. " and tells me to >test for the $SHELL with "ssh -x" and it returns /bin/bash corretly. >I read about -ssi options and sun lamboot to use rsh agent as ssh -x but >it does't seems to use that and thus when i am running mpirun to run my >hello world mpi it responds from master node only. > >4. reports from ganglia are not shown on nodes so i need to run > run services gmatd start on each client (i can still execute c3 >commands with no problems, like cexec service gmatd start etc...) Did you run OSCAR wizard step 7? If you did and the network problems existed, the step may not have properly finished configuring your cluster. -- David N. Lombard My comments represent my opinions, not those of Intel Corporation. ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_ide95&alloc_id396&op=click _______________________________________________ Oscar-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-users
