Hi Brad:
To get around the problem,
you'll have to edit your autoinstall master script (located in
/var/lib/systemimager/scripts/) for your image.
Edit the SystemConfigurator
section under [INTERFACE0] changing "eth0" to "eth1" - the section looks
something like this:
[INTERFACE0]
DEVICE = eth0
TYPE = dhcp
EOL
DEVICE = eth0
TYPE = dhcp
EOL
In the future we would like
to be able to provide an easy way to change this via the GUI. There is
already a RFE filed:
http://svn.oscar.openclustergroup.org/trac/oscar/ticket/106
http://svn.oscar.openclustergroup.org/trac/oscar/ticket/106
Cheers,
Bernard
From: [EMAIL PROTECTED] on behalf of Brad Aisa
Sent: Tue 13/06/2006 01:53
To: oscar users
Subject: [Oscar-users] eth0:1 flipflop!
I PXE booted from the motherboard ethernet port, and installed
OSCAR that way. Unfortunately, upon rebooting, there was no connectivity. It
seems that the following has occurred: the config was set up assuming eth0 would
be the network, but upon reboot, eth1 is actually this interface (which isn't
even started) and eth0 is the PCI card. So of course, now nothing
works!
Does anyone have experience with nodes that have two nics? (ex. 1
for network, 1 for HPC interconnect)?
thanks for any tips
Brad
[EMAIL PROTECTED]
_______________________________________________
Oscar-users
mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
_______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
