|
Hi Tyler:
/boot should be created,
however, it's possible that it was simply not mounted.
When you boot into rescue
mode, it'll ask whether you want it to search for installed Red Hat OS on the
HD, if you say yes it should automatically mount all the partitions under
/mnt/sysimage (or something like that). So you should look inside
/mnt/sysimage/boot in that case.
If it did not, you can
manually mount it by doing:
mkdir -p
/mnt/boot
mount /dev/hda1 /mnt/boot
(substitute "sda" with "hda" if you're using SCSI HD).
Then cd into /mnt/boot
and look for grub/menu.lst, it should be there...
As for the directory
listing you showed from the "ash shell", the "boot" directory should reside in
/a/boot if it was mounted. /a/ is the temporary mount point for your
compute node's /root partition.
Cheers,
Bernard
Bernard,
Thank you again for your speedy and helpful responses. We all
appreciate your efforts.
Well, no wonder I couldn't find the .img ... I dont have a /boot
directory. I went ahead and used cd 1 to boot into rescue
mode. No menu.lst file was created and no /boot directory exists.
I can show you what directories were created ... from the ash shell:
a/ etc/ linuxrc* old_root/ sbin/ usr/
bin/ floppy/ my_modules/ proc/ scripts/
var/
dev/ lib/ new_root/ root/ tmp/
Thoughts on this dilemma?
Thanks.
-ty
>>> "Bernard Li" <[EMAIL PROTECTED]> 6/19/2006
1:50:50 PM >>>
Hi Tyler:
Do you have both IDE
and SCSI HDs in your compute nodes?
Can you boot one of
your compute nodes (which failed installation) into rescue mode (using the
first CD of RHEL4 and typing "linux rescue" at the prompt) and show us the
contents of /boot/grub/menu.lst (of the HD).
It looks like Grub was
not installed properly...
P.S. Kernel and
initrd.img of your installed node should reside in /boot - SystemConfigurator
creates a ramdisk for you on the fly though, and the filename is prefixed by
"sc-".
Cheers,
Bernard
Hi.
I have successfully created an image and am now trying to network boot
a single node. The network install finishes (apparently with success)
but it does give some "problem" messages before the boot process is
done (see below). After the network boot, I reboot again (from the
hard drive), but I get a grub> prompt. From the prompt, I have
tried to load the kernel but I dont know where it lives. I have also
tried to "find" the image, based on the name I originally gave it, but it
cant seem to find it. So, it seems something is not right. Where
should I look to investigate the problem further?
Thanks.
-Tyler
Utah Division of Air Quality
—-------------------------------------------------------------------------------------------
mv: cannot stat '/boot/grub/device.map' : No such file or
directory
Probing deivices to guess BIOS drives. This may take a long
time.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
.. blah blah blah ...
(fd0) /dev/flopy/0
(hd0) /dev/ide/host0/bus0/target0/lun0/disc
(hd1) /dev/scsi/host0/bus0/target0/lun0/disc
Use of unitintialized value in concatenation (.) or string at
/usr/lib/systemcnfig/Boot/Grub.pm line 315
Probing deivices to guess BIOS drives. This may take a long
time.
end_request: I/O error, dev fdo, sector 0
run_post_install_scripts
... blah blah ...
Reboot me already.
—-------------------------------------------------------------------------------------------
Finally, is there a file created that contains all of the network
boot screen output? I found one file in /tmp called si.log, but
it contains only a small bit of the
process.
|
