Have you tried network booting the client after clicking on the "Setup
Network Boot" button?
That changes some of the settings on the DHCP server so that it will send
out client images.
Is the firewall on the server node turned off?
Unfortunately the oscarinstall.log files don't usually help with networking
problems...
Check /var/log/messages and any other networking based logs to see if there
are any reported errors. Otherwise you are probably going to have to break
out a packet sniffer to see if any traffic is going through.
It could also be a driver issue, I had a 3Com card a while back which had a
bad UDP driver and had this sort of problem. You might try checking the mfg
and seeing if they have an updated driver or if there are reports on the net
about problems with UDP.
Also, if you have a managed switch you might want to check and make sure it
is allowing all traffic on 192.168.0.* (udp and tcp)
On 2/13/07, Marco Bayas <[EMAIL PROTECTED]> wrote:
Hi.
The two computers are connected via a private switch. I assigned the IP
number 192.168.0.1 to the network card in the server node which also acts
as a DHCP server. The client computer was assigned the number 192.168.0.2by the
DHCP server. Anyway, it seems that some basic communication between
tho computers is established.
Regarding the "Setup Network Boot", I clicked on it after I collected the
MAC address.
On Feb 12, 2007, at 6:54 PM, Michael Edwards wrote:
Are the two computers connected via a private switch or hooked into a
public network?
Did you click on the "Setup Network Boot" button in the "Setup Networking"
window (it is toward the bottom under "Boot Environment") before trying to
collect mac addresses?
On 2/12/07, Marco Bayas <[EMAIL PROTECTED]> wrote:
>
> Hello.
> I am trying to install OSCAR 5.0 with Mandriva 2006 in order to cluster
> two computers. The server node has Mandriva 2006 installed whereas the
> client has windows XP. I was expecting that the cluster installation would
> erase windows XP in the client and install Mandriva instead. I managed to
> run the cluster installation program until to step 6 "set up networking" but
> I have not been able to install the client image because the network boot of
> the client machine fails. The network boot stops with the message "TFTP open
> time out". I also tried to use the autoinstall CD but it did not work.
> Apparently, the "network is unreachable".
>
> Could somebody tell me what I am doing wrong?
>
> *Marco V. Bayas*
> Departamento de Física y Astronomía
> Escuela Politécnica Nacional
> Casilla 17-12-656
> Quito-Ecuador
>
> *Nothing great in the world has been accomplished without passion.*
> Georg Wilhelm Friedrich Hegel
>
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
> security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
*Marco V. Bayas*
Departamento de Física y Astronomía
Escuela Politécnica Nacional
Casilla 17-12-656
Quito-Ecuador
*Nothing great in the world has been accomplished without passion.*
Georg Wilhelm Friedrich Hegel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
