I suspect a problem with the gpx route. Could you check inside the file (simply using text editor). Some apps will save instead of a route or track simply list of waypoints, and Osmand cannot cope with this - see examples here <http://cycleseven.org/gps-waypoints-routes-and-tracks-the-difference http://cycleseven.org/gps-waypoints-routes-and-tracks-the-difference>. The solution is to transform the file, using for example gpsbabel <https://www.gpsbabel.org/htmldoc-development/filter_transform.html>.
On Wednesday, 28 June 2017 15:09:30 UTC+2, Brian C wrote: > > Hello, > > thank you for the replys. > > I will upload the .gpx file(s) and a screen shot today. I have tested this > on several .gpx files (v1.0 gpx format) that I use ok on garmin devices > and MyRouteApp.com. > > OsmAnd does not show the route calculated when .gpx is loaded. Just > straight lines connecting the waypoints. > > Is there a way to stop the recalulation of routes? > > thanks > > > On Wednesday, June 28, 2017 at 1:22:50 AM UTC-4, Poutnik wrote: >> >> Dne 27/06/2017 v 20:25 Brian Coutinho napsal(a): >> > Hi, >> > its been a while (a year or two ) since I used OsmAnd. I saw there has >> > been major updates and decided to give it another go. >> > >> > I have loaded a GPX file into the application and am trying to follow >> > the route. Unfortunately OsmAnd is not workign correctly. The start >> > and end points are on the same road, as its a GPX file of a motorcycle >> > route I ride. It goes out into the countryside from the start >> > postion, returning after about a 200km back to the same street that >> > we started from. OsmAnd just shows a route of 100m ! The route is the >> > start and end points. >> > >> > What am I doing wrong? Is this a bug? Can I force a recalculate route >> ? >> > >> "Is not working correctly" may not be the proper expression, >> as it may do exactly what it is supposed to do by developers, >> but not what you want it to do. >> >> I do not use OSMAnd much these days, preferring LocusMap for my use >> cases, >> but I guess there are options >> >> - just to follow the GPX route , without recalculations - this is what >> you want >> - possibility of GPX route recalculation, if triggered by user or OSMAnd, >> i.e. if you are off the route. >> In this case it may jump after the easy route to the destination, >> not realizing the GPX route is more important than destination. >> >> Try to avoid any recalculation, just plain following the GPX. >> In the worst case, let GPX just to be displayed, >> or create 2 GPXs from 1, the way there and the way back. >> >> -- >> Poutnik ( The Wanderer ) >> >> My Brouter profiles >> https://github.com/poutnikl/Brouter-profiles/wiki >> >> -- You received this message because you are subscribed to the Google Groups "Osmand" group. To unsubscribe from this group and stop receiving emails from it, send an email to osmand+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.