Hi folks, I've been messing around with rtl_tcp and an RTL2832 device on a Raspberry Pi and want to add a bank of front end filters and a LNA that can be controlled by the GPIO.
I want to allow manual control of the signal path via a web page hosted on the Pi, but also want to be able to have the filters selected automatically based on the frequency that the RTL device is tuned to. I noticed that rtl_tcp helpfully echos the frequency changes to the console, so I wrote a simple shell script to gather this data and control the GPIO. Somebody may have already done this and there is probably a better way to achieve it but, if this would be of any use to you, please feel free to copy and use as you wish. http://www.purpleplanet.org/?q=rtl-robot Cheers, Simon
