Hi Authors,
In Section : 2 4.2. Prefix SID Sub-TLV, L-Flag represent IGP segment is local
or global (Suggest to change to G so that it will be consistent with Segment
Routing Architecture draft) similar to that can we have A-Flag to indicate
Anycast SID.
The L-Flag: Local/Global Flag. If set, then the value/index
carried by the PrefixSID has local significance. If not set,
then the value/index carried by this subTLV has global
significance.
https://tools.ietf.org/html/draft-filsfils-rtgwg-segment-routing-00#page-17
3.2<https://tools.ietf.org/html/draft-filsfils-rtgwg-segment-routing-00#section-3.2>.
IGP Segment Terminology
3.2.1<https://tools.ietf.org/html/draft-filsfils-rtgwg-segment-routing-00#section-3.2.1>.
IGP Segment, IGP SID
The terms "IGP Segment" and "IGP SID" are the generic names for a
segment attached to a piece of information advertised by a link-state
IGP, e.g. an IGP prefix or an IGP adjacency.
The IGP signaling extension to advertise an IGP segment includes the
G-Flag indicating whether the IGP segment is global or local.
IGP-SID
+--+--+
/ | \
Prefix-SID x Adj-SID
+----+---+
/ | \
Node-SID y Anycast-SID
Figure 7: IGP SID Terminology
The IGP Segment terminology is introduced to ease the documentation
of SR use-cases and hence does not propose a name for any possible
variation of IGP segment supported by the architecture. For example,
y in Figure 7 could represent a local IGP segment attached to an IGP
Prefix. This variation, while supported by the SR architecture is
not seen in the SR use-cases and hence does not receive a specific
name.
Thanks & Regards
Anil S N
"Be liberal in what you accept, and conservative in what you send" - Jon Postel
From: Anil Kumar S N (VRP Network BL)
Sent: 21 September 2015 20:00
To: 'Peter Psenak'; '[email protected]'; '[email protected]';
'[email protected]'; '[email protected]'; '[email protected]';
Jeff Tantsura
Cc: OSPF WG List
Subject: draft-psenak-ospf-segment-routing-extensions-05
Hi Authors,
In Segment Routing Architecture draft, There is a provision to allocate
multiple Adj-SIDs to same adjacency in case of bundle interface.
In IGP extension draft we need to have one more Adj-SID Sub-TLV type to
distribute SID's for bundle members with bundle member ID along with link
type/data & ID.
Please let me know your opinion.
Reference :
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-05
3.5. IGP-Adjacency Segment, Adj-SID
A node MAY allocate multiple Adj-SIDs to the same adjacency. An
example is where the adjacency is established over a bundle
interface. Each bundle member MAY have its own Adj-SID.
Thanks & Regards
Anil S N
"Be liberal in what you accept, and conservative in what you send" - Jon Postel
_______________________________________________
OSPF mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/ospf
