Hi Acee, On Thu, Jun 9, 2016 at 6:42 PM, Acee Lindem (acee) <[email protected]> wrote:
> Hi Alia, > > Thanks for the review - you caught some rather subtle points. > thanks - this was a nice tractable draft to read in a short time. > From: OSPF <[email protected]> on behalf of Alia Atlas < > [email protected]> > Date: Thursday, June 9, 2016 at 3:57 PM > To: OSPF WG List <[email protected]> > Subject: [OSPF] AD review of draft-ietf-ospf-transition-to-ospfv3-07 > > As is customary, I have done my AD review > of draft-ietf-ospf-transition-to-ospfv3-07. > First, I would like to thank the authors for their work on this document. > It looks like > very useful technology. > > I have a few minor questions below. I will put this into IETF Last Call > as well while > waiting for the authors to update the draft ASAP. That gives a chance of > making it > on to the June 30 telechat if the authors are responsive. > > Minor: > > 1) Sec 3.1: "If this is supported, the IPv4 data plane MUST resolve > the layer-2 address using Address Resolution Protocol (ARP) on > multi-access networks and point-to-point over LAN [RFC5309] for > direct next-hops on different IPv4 subnets." > > I believe it is the IPv4 (i.e. layer-3) address to be resolved with > ARP - not the > layer-2 address. > > > Ok - this text comes from me and I was viewing resolution from the > standpoint of the “to” address family rather than the “from” address > family. I agree the “from” address family is probably a more common > characterization. > Feel free to say "MUST resolve from the IPv4 address to the layer-2 address using ARP...." if you want extreme clearness. > > > 2) Sec 3.3: "If IPv4 transport, as specified herein, is used for IPv6 > address > families, virtual links cannot be > supported. Hence, it is RECOMMENDED to use the IP transport > matching the address family in OSPF routing domains requiring > virtual links." > > From this section, I was expecting that "cannot" would be a "can". > Did > I miss something? Can you clarify further? > > > The draft doesn’t address virtual link support in deployments where the > address-family doesn’t match the transport. Hence, the text is correct as > written. > Ok - but the draft just says "Hence, it is RECOMMENDED to use the IP transport matching the address family in OSPF routing domains requiring virtual links." Can you clean this up to be extremely clear? With an IPv4 transport, IPv6 virtual links are not supported. With an IPv4 transport, IPv4 virtual links are supported. and vice versa. I read the relaxation as applying to both IPv4 and IPv6; maybe I was reading too fast, but a few clarifying words would probably help. 3) Sec 1: 2nd to last paragraph: "In situations where the IPv6 deployment > is a > proper superset of the IPv4 deployment, it is expected that OSPFv3 > would be transported over IPv6." > > I believe the "proper" should be removed. If the IPv6 deployment is > exactly the same > as the IPv4 deployment, then it is expected that OSPFv3 would be > transported over > IPv6. As it is,how the case of equal deployment is handled is > unspecified. > > > I agree. We will remove “proper". > thanks, Alia > > > Thanks, > Acee > > > > Thanks, > Alia > >
_______________________________________________ OSPF mailing list [email protected] https://www.ietf.org/mailman/listinfo/ospf
