Hi Jie,

Sorry we didn't have time to adequately cover the problem and solution in the 
OSPF WG meeting.

As I understand the two use cases which the problem statement is targeted at 
are:

   1. Timer bugs - either in he system or local to the OSPF process that result 
in the LSA reaching MaxAge in faster than the refresh interval (which some 
implementations violate and most carrier-class implementations jitter).

   2. LS Update packet corruption impacted the LSA Age field but not the rest 
of the LSA (as this would be detected by the LSA checksum).

At the time of the first polling, many felt that these two problems were both 
due to bugs and we shouldn't modify the protocol to address them.

If the WG decides to work on this problem, I would prefer solutions that focus 
on the OSPF router max aging the LSAs as opposed to every router in the domain. 
In other words, what I would advocate is rate-limiting the max aging of LSAs 
with more aggressive rate limiting for LSAs that are not self-originated. We 
already have some guidance on rate limiting in section 7.4 of RFC 7503. This 
could be more formalized with the same amount of state preservation as your 
proposal (https://www.ietf.org/id/draft-dong-ospf-flush-mitigation-00.txt).

Thanks,
Acee


From: OSPF <[email protected]<mailto:[email protected]>> on behalf of 
Jie Dong <[email protected]<mailto:[email protected]>>
Date: Wednesday, November 16, 2016 at 11:57 PM
To: OSPF WG List <[email protected]<mailto:[email protected]>>
Cc: "Zhangxudong (zhangxudong, VRP)" 
<[email protected]<mailto:[email protected]>>, 
"[email protected]<mailto:[email protected]>" 
<[email protected]<mailto:[email protected]>>
Subject: [OSPF] Solicit comments to OSPF LSA flushing problem statement and 
mitigation solution

Dear all,

Due to time limit, at the OSPF meeting we didn't have much time to discuss the 
two drafts related to OSPF LSA flushing problem.

The coauthors would like to encourage comments and discussion about both the 
problem statement and the mitigation solution.

Here is the link to the slides:

https://www.ietf.org/proceedings/97/slides/slides-97-ospf-ospf-maxage-flooding-00.pdf

Best regards,
Jie/Zhenqiang/Xudong


_______________________________________________
OSPF mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/ospf

Reply via email to