Here is something you can try : Use otbcli_ReadImageInfo on one of the individual geotiff files (preferabily the upper left one, should be named R1C1 no ?) to write down a geom file containing the metadata. Then attach the geom file to the TIL file with extended filename : -in “mytil.TIL?&geom=theGeomFile.geom”.
Also open a bug report because looking up the correct file from the TIL file instead of individual geotiff files should not be hard … Regards, Julien De : otb-users@googlegroups.com [mailto:otb-users@googlegroups.com] De la part de Morgan Bond Envoyé : mardi 22 mai 2018 18:10 À : otb-users <otb-users@googlegroups.com> Objet : [otb-users] Worldview-2 .TIL files and OTB I have a large number of tiled Digital Globe Worldview-2 images that I would like to perform optical calibration on. As delivered from Digital Globe, each image strip is a folder that contains a .TIL file that arranges the individual geotiff files and aligns them into a single image. GDAL seems to handle these well, and they import fine (I am currently using Monteverdi for this). However, each of these folders also contains an .imd and .xml file. These files each contain much of the pertinent information for sensor bias, image date, sun angle, azimuth, etc. As far as I can tell OTB does not recognize or attempt to use these files. Has anyone attempted to perform these corrections with the tiled files from Digital Globe? Thanks, Morgan -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to otb-users@googlegroups.com<mailto:otb-users@googlegroups.com> To unsubscribe from this group, send email to otb-users+unsubscr...@googlegroups.com<mailto:otb-users+unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to otb-users+unsubscr...@googlegroups.com<mailto:otb-users+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout. -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to otb-users@googlegroups.com To unsubscribe from this group, send email to otb-users+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to otb-users+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.