On 19/08/2010 12:57 AM, Nicolas Ochem wrote:
Probably there's something missing still, but you'll only notice the
difference if you have several networks.
In the same line in pxelinux.cfg/default, you should also add
kssendmac
ksdevice=bootif
and you should add an extra line immediately below with
ipappend 2
If you don't do that, ovirt-early does not download the augeas
interface configuration at startup and all network connections are
bridged to eth0 = default behaviour.
You can check if it works by checking /var/log/ovirt.log. There should
be the output of a wget command there.
I did notice some oddities with the network. If I tried to bring up a
VM on another node where the nic to network order was swapped it didn't
seem to like it. ie. node1 - eth0 guest, eth1 admin and node2 - eth0
admin, eth1 guest.
Also, nodes don't always appear. Start up one node and it all works,
shut it down, start it up with the cables swapped over everything
appears to work but nothing appears in the UI.
Is there a way to remove nodes? I have one node that's in there twice
because I was playing around with which NIC would be plugged in to which
network. For the moment I've just created another group and moved any
defunct nodes to there.
Justin.
_______________________________________________
Ovirt-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/ovirt-devel
