Some code-block directives are not understood using Trusty (I was using 14.04.1 when the issue was found) default package versions, which blocks the build.
An error example: writing output... [100%] topics/language-bindings Warning, treated as error: /home/dball/ovs/Documentation/topics/language-bindings.rst:39: WARNING: Pygments lexer name u'shell' is not known 14.04.1 has Sphinx 1.2.2 and Pygments 1.6. I expect Trusty to still be widely used, so we should be able to build ovs with it. requirements.rst indicates only: sphinx>=1.2,<2.0 ovs_sphinx_theme>=1.0,<1.1 Fixes: f150a8bafbf2 ("doc: Document various language bindings") Suggested-by: Daniele Di Proietto <diproiet...@vmware.com> Signed-off-by: Darrell Ball <dlu...@gmail.com> CC: Stephen Finucane <step...@that.guru> --- .../internals/contributing/documentation-style.rst | 2 +- Documentation/intro/install/windows.rst | 70 +++++++++++----------- Documentation/topics/language-bindings.rst | 2 +- 3 files changed, 37 insertions(+), 37 deletions(-) diff --git a/Documentation/internals/contributing/documentation-style.rst b/Documentation/internals/contributing/documentation-style.rst index ea41a07..184f728 100644 --- a/Documentation/internals/contributing/documentation-style.rst +++ b/Documentation/internals/contributing/documentation-style.rst @@ -259,7 +259,7 @@ Figures and Other Media - All images should be in PNG format and compressed where possible. For PNG files, use OptiPNG and AdvanceCOMP's ``advpng``: - .. code-block:: shell + .. code-block:: bash $ optipng -o7 -zm1-9 -i0 -strip all <path_to_png> $ advpng -z4 <path_to_png> diff --git a/Documentation/intro/install/windows.rst b/Documentation/intro/install/windows.rst index caa9f40..6cc8a6b 100644 --- a/Documentation/intro/install/windows.rst +++ b/Documentation/intro/install/windows.rst @@ -225,7 +225,7 @@ building on Linux, FreeBSD, or NetBSD. all MinGW sessions and then run the below command from MSVC developers command prompt.: - .. code-block:: doscon + .. code-block:: bat > mingw-get upgrade msys-core-bin=1.0.17-1 @@ -276,7 +276,7 @@ Now run ``./uninstall.cmd`` to remove the old extension. Once complete, run turn on ``TESTSIGNING`` boot option or 'Disable Driver Signature Enforcement' during boot. The following commands can be used: -.. code-block:: doscon +.. code-block:: bat > bcdedit /set LOADOPTIONS DISABLE_INTEGRITY_CHECKS > bcdedit /set TESTSIGNING ON @@ -294,7 +294,7 @@ to work (covered later). The command to create a new switch named 'OVS-Extended-Switch' using a physical NIC named 'Ethernet 1' is: -.. code-block:: ps1con +.. code-block:: ps1 PS > New-VMSwitch "OVS-Extended-Switch" -NetAdapterName "Ethernet 1" @@ -307,7 +307,7 @@ In the properties of any switch, you should should now see "Open vSwitch Extension" under 'Extensions'. Click the check box to enable the extension. An alternative way to do the same is to run the following command: -.. code-block:: ps1con +.. code-block:: ps1 PS > Enable-VMSwitchExtension "Open vSwitch Extension" OVS-Extended-Switch @@ -330,7 +330,7 @@ database, ovsdb-server. Each machine on which Open vSwitch is installed should run its own copy of ovsdb-server. Before ovsdb-server itself can be started, configure a database that it can use: -.. code-block:: doscon +.. code-block:: bat > ovsdb-tool create C:\openvswitch\etc\openvswitch\conf.db \ C:\openvswitch\usr\share\openvswitch\vswitch.ovsschema @@ -338,7 +338,7 @@ configure a database that it can use: Configure ovsdb-server to use database created above and to listen on a Unix domain socket: -.. code-block:: doscon +.. code-block:: bat > ovsdb-server -vfile:info --remote=punix:db.sock --log-file \ --pidfile --detach @@ -351,7 +351,7 @@ Initialize the database using ovs-vsctl. This is only necessary the first time after you create the database with ovsdb-tool, though running it at any time is harmless: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl --no-wait init @@ -359,14 +359,14 @@ harmless: If you would later like to terminate the started ovsdb-server, run: - .. code-block:: doscon + .. code-block:: bat > ovs-appctl -t ovsdb-server exit Start the main Open vSwitch daemon, telling it to connect to the same Unix domain socket: -.. code-block:: doscon +.. code-block:: bat > ovs-vswitchd -vfile:info --log-file --pidfile --detach @@ -374,7 +374,7 @@ domain socket: If you would like to terminate the started ovs-vswitchd, run: - .. code-block:: doscon + .. code-block:: bat > ovs-appctl exit @@ -394,7 +394,7 @@ Add bridges Let's start by creating an integration bridge, ``br-int`` and a PIF bridge, ``br-pif``: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-br br-int > ovs-vsctl add-br br-pif @@ -408,7 +408,7 @@ Let's start by creating an integration bridge, ``br-int`` and a PIF bridge, Validate that ports are added by dumping from both ovs-dpctl and ovs-vsctl: -.. code-block:: doscon +.. code-block:: bat > ovs-dpctl show system@ovs-system: @@ -457,7 +457,7 @@ enable them and set the corresponding values to it to make them IP-able. As a whole example, if we issue the following in a powershell console: -.. code-block:: ps1con +.. code-block:: ps1 PS > Get-NetAdapter | select Name,InterfaceDescription Name InterfaceDescription @@ -476,13 +476,13 @@ We can see that we have a switch(external) created upon adapter name 'Ethernet0' with the internal ports under name 'br-pif' and 'br-int'. Thus resulting into the following ovs-vsctl commands: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-pif Ethernet0 Dumping the ports should show the additional ports that were just added: -.. code-block:: doscon +.. code-block:: bat > ovs-dpctl show system@ovs-system: @@ -525,7 +525,7 @@ is being addressed. After assigning the name ``ovs-port-a``, the VIF is connected back to the Hyper-V switch with name ``OVS-HV-Switch``, which is assumed to be the Hyper-V switch with OVS extension enabled.: -.. code-block:: ps1con +.. code-block:: ps1 PS > import-module .\datapath-windows\misc\OVS.psm1 PS > $vnic = Get-VMNetworkAdapter <Name of the VM> @@ -536,13 +536,13 @@ assumed to be the Hyper-V switch with OVS extension enabled.: Next, add the VIFs to ``br-int``: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-int ovs-port-a Dumping the ports should show the additional ports that were just added: -.. code-block:: doscon +.. code-block:: bat > ovs-dpctl show system@ovs-system: @@ -582,7 +582,7 @@ found at technet_. For example, to set up a switch team combined from ``Ethernet0 2`` and ``Ethernet1 2`` named ``external``: -.. code-block:: ps1con +.. code-block:: ps1 PS > Get-NetAdapter Name InterfaceDescription @@ -602,7 +602,7 @@ For example, to set up a switch team combined from ``Ethernet0 2`` and This will result in a new adapter bound to the host called ``external``: -.. code-block:: ps1con +.. code-block:: ps1 PS > Get-NetAdapter Name InterfaceDescription @@ -617,7 +617,7 @@ This will result in a new adapter bound to the host called ``external``: Next we will set up the Hyper-V VMSwitch on the new adapter ``external``: -.. code-block:: ps1con +.. code-block:: ps1 PS > New-VMSwitch -Name external -NetAdapterName external \ -AllowManagementOS $false @@ -628,7 +628,7 @@ Under OVS the adapters under the team ``external``, ``Ethernet0 2`` and The following example shows how the bridges look with the NICs being separated: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl show 6cd9481b-c249-4ee3-8692-97b399dd29d8 @@ -653,7 +653,7 @@ Switch VLAN tagging along with patch ports between ``br-int`` and ``br-pif`` is used to configure VLAN tagging functionality between two VMs on different Hyper-Vs. To start, add a patch port from ``br-int`` to ``br-pif``: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-int patch-to-pif > ovs-vsctl set interface patch-to-pif type=patch \ @@ -661,7 +661,7 @@ Hyper-Vs. To start, add a patch port from ``br-int`` to ``br-pif``: Add a patch port from ``br-pif`` to ``br-int``: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-pif patch-to-int > ovs-vsctl set interface patch-to-int type=patch \ @@ -669,7 +669,7 @@ Add a patch port from ``br-pif`` to ``br-int``: Re-Add the VIF ports with the VLAN tag: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-int ovs-port-a tag=900 > ovs-vsctl add-port br-int ovs-port-b tag=900 @@ -681,7 +681,7 @@ The Windows Open vSwitch implementation support VXLAN and STT tunnels. To add tunnels. For example, first add the tunnel port between 172.168.201.101 <-> 172.168.201.102: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-int tun-1 > ovs-vsctl set Interface tun-1 type=<port-type> @@ -692,7 +692,7 @@ tunnels. For example, first add the tunnel port between 172.168.201.101 <-> ...and the tunnel port between 172.168.201.101 <-> 172.168.201.105: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl add-port br-int tun-2 > ovs-vsctl set Interface tun-2 type=<port-type> @@ -717,14 +717,14 @@ daemons via ``make install``. To start, create the database: -.. code-block:: doscon +.. code-block:: bat > ovsdb-tool create C:/openvswitch/etc/openvswitch/conf.db \ "C:/openvswitch/usr/share/openvswitch/vswitch.ovsschema" Create the ovsdb-server service and start it: -.. code-block:: doscon +.. code-block:: bat > sc create ovsdb-server \ binpath="C:/openvswitch/usr/sbin/ovsdb-server.exe \ @@ -739,25 +739,25 @@ Create the ovsdb-server service and start it: paths. You can make sure that the correct path has been registered with the Windows services manager by running: - .. code-block:: doscon + .. code-block:: bat > sc qc ovsdb-server Check that the service is healthy by running: -.. code-block:: doscon +.. code-block:: bat > sc query ovsdb-server Initialize the database: -.. code-block:: doscon +.. code-block:: bat > ovs-vsctl --no-wait init Create the ovs-vswitchd service and start it: -.. code-block:: doscon +.. code-block:: bat > sc create ovs-vswitchd \ binpath="C:/openvswitch/usr/sbin/ovs-vswitchd.exe \ @@ -766,13 +766,13 @@ Create the ovs-vswitchd service and start it: Check that the service is healthy by running: -.. code-block:: doscon +.. code-block:: bat > sc query ovs-vswitchd To stop and delete the services, run: -.. code-block:: doscon +.. code-block:: bat > sc stop ovs-vswitchd > sc stop ovsdb-server diff --git a/Documentation/topics/language-bindings.rst b/Documentation/topics/language-bindings.rst index 5114125..ff91bb8 100644 --- a/Documentation/topics/language-bindings.rst +++ b/Documentation/topics/language-bindings.rst @@ -36,7 +36,7 @@ Python The Python bindings are part of the `Open vSwitch package`__. You can install the bindings using ``pip``: -.. code-block:: shell +.. code-block:: bash $ pip install ovs -- 1.9.1 _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev