Looks good by me! On Thu, Nov 9, 2017 at 4:03 PM Ben Pfaff <b...@ovn.org> wrote:
> This is adapted from a talk I gave at OpenStack Summit Sydney on Nov. 6. > > Signed-off-by: Ben Pfaff <b...@ovn.org> > Acked-by: Mark Michelson <mmich...@redhat.com> > --- > v1->v2: Replace overview of OVN with reference to ovn-architecture(7). > (Thanks Mark!) > v2->v3: Additional improvements from Mark Michelson. > > Documentation/automake.mk | 1 + > Documentation/topics/index.rst | 1 + > Documentation/topics/ovn-news-2.8.rst | 278 > ++++++++++++++++++++++++++++++++++ > 3 files changed, 280 insertions(+) > create mode 100644 Documentation/topics/ovn-news-2.8.rst > > diff --git a/Documentation/automake.mk b/Documentation/automake.mk > index 733da3ca9da1..3ea2c2cb5fe0 100644 > --- a/Documentation/automake.mk > +++ b/Documentation/automake.mk > @@ -40,6 +40,7 @@ DOC_SOURCE = \ > Documentation/topics/integration.rst \ > Documentation/topics/language-bindings.rst \ > Documentation/topics/openflow.rst \ > + Documentation/topics/ovn-news-2.8.rst \ > Documentation/topics/ovsdb-replication.rst \ > Documentation/topics/porting.rst \ > Documentation/topics/role-based-access-control.rst \ > diff --git a/Documentation/topics/index.rst > b/Documentation/topics/index.rst > index 00d6b0b837ec..13b6d8abbb30 100644 > --- a/Documentation/topics/index.rst > +++ b/Documentation/topics/index.rst > @@ -58,6 +58,7 @@ OVN > > high-availability > role-based-access-control > + ovn-news-2.8 > > .. list-table:: > > diff --git a/Documentation/topics/ovn-news-2.8.rst > b/Documentation/topics/ovn-news-2.8.rst > new file mode 100644 > index 000000000000..fae0a4278157 > --- /dev/null > +++ b/Documentation/topics/ovn-news-2.8.rst > @@ -0,0 +1,278 @@ > +.. > + Licensed under the Apache License, Version 2.0 (the "License"); you > may > + not use this file except in compliance with the License. You may > obtain > + a copy of the License at > + > + http://www.apache.org/licenses/LICENSE-2.0 > + > + Unless required by applicable law or agreed to in writing, software > + distributed under the License is distributed on an "AS IS" BASIS, > WITHOUT > + WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. > See the > + License for the specific language governing permissions and > limitations > + under the License. > + > + Convention for heading levels in Open vSwitch documentation: > + > + ======= Heading 0 (reserved for the title in a document) > + ------- Heading 1 > + ~~~~~~~ Heading 2 > + +++++++ Heading 3 > + ''''''' Heading 4 > + > + Avoid deeper levels because they do not render well. > + > +=============================== > +What's New with OVS and OVN 2.8 > +=============================== > + > +This document is about what was added in Open vSwitch 2.8, which was > released > +at the end of August 2017, concentrating on the new features in OVN. It > also > +covers some of what is coming up in Open vSwitch and OVN 2.9, which is > due to > +be released in February 2018. OVN has many features, and this document > does > +not cover every new or enhanced feature (but contributions are welcome). > + > +This document assumes a basic familiarity with Open vSwitch, OVN, and > their > +associated tools. For more information, please refer to the Open vSwitch > and > +OVN documentation, such as the ``ovn-architecture``\(7) manpage. > + > +Debugging and Troubleshooting > +----------------------------- > + > +Before version 2.8, Open vSwitch command-line tools were far more painful > to > +use than they needed to be. This section covers the improvements made to > the > +CLI in the 2.8 release. > + > +User-Hostile UUIDs > +~~~~~~~~~~~~~~~~~~ > + > +The OVN CLI, through ``ovn-nbctl``, ``ovn-nbctl``, and ``ovn-trace``, used > +full-length UUIDs almost everywhere. It didn't even provide any > assistance > +with completion, etc., which in practice meant always cutting and pasting > UUIDs > +from one command or window to another. This problem wasn't limited to the > +places where one would expect to have to see or use a UUID, either. In > many > +places where one would expect to be able to use a network, router, or port > +name, a UUID was required instead. In many places where one would want > to see > +a name, the UUID was displayed instead. More than anything else, these > +shortcomings made the CLI user-hostile. > + > +There was an underlying problem that the southbound database didn't > actually > +contain all the information needed to provide a decent user interface. > In some > +cases, for example, the human-friendly names that one would want to use > for > +entities simply weren't part of the database. These names weren't > necessary > +for correctness, only for usability. > + > +OVN 2.8 eased many of these problems. Most parts of the CLI now allow > the user > +to abbreviate UUIDs, as long as the abbreviations are unique within the > +database. Some parts of the CLI where full-length UUIDs make output hard > to > +read now abbreviate them themselves. Perhaps more importantly, in many > places > +the OVN CLI now displays and accepts human-friendly names for networks, > +routers, ports, and other entities. In the places where the names were > not > +previously available, OVN (through ``ovn-northd``) now copies the names > into > +the southbound database. > + > +The CLIs for layers below OVN, at the OpenFlow and datapath layers with > +``ovs-ofctl`` and ``ovs-dpctl``, respectively, had some similar problems > in > +which numbers were used for entities that had human-friendly names. Open > +vSwitch 2.8 also solves some of those problems. Other than that, the most > +notable enhancement in this area was the ``--no-stats`` option to > ``ovs-ofctl > +dump-flows``, which made that command's output more readable for the cases > +where per-flow statistics were not interesting to the reader. > + > +Connections Between Levels > +~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +OVN and Open vSwitch work almost like a stack of compilers: the OVN > Neutron > +plugin translates Neutron configuration into OVN northbound configuration, > +which ``ovn-northd`` translates into logical flows, which > ``ovn-controller`` > +translates into OpenFlow flows, which ``ovs-vswitchd`` translates into > datapath > +flows. For debugging and troubleshooting it is often necessary to > understand > +exactly how these translations work. The relationship from a logical > flow to > +its OpenFlow flows, or in the other direction, from an OpenFlow flow back > to > +the logical flow that produced it, was often of particular interest, but > OVN > +didn't provide good tools for the job. > + > +OVN 2.8 added some new features that ease these jobs. ``ovn-sbctl > lflow-list`` > +has a new option ``--ovs`` that lists the OpenFlow flows on a particular > +chassis that were generated from the logical flows that it lists. > +``ovn-trace`` also added a similar ``--ovs`` option that applies to the > logical > +flows it traces. > + > +In the other direction, OVN 2.8 added a new utility ``ovn-detrace`` that, > given > +an Open vSwitch trace of OpenFlow flows, annotates it with the logical > flows > +that yielded those OpenFlow flows. > + > +Distributed Firewall > +~~~~~~~~~~~~~~~~~~~~ > + > +OVN supports a distributed firewall with stateful connection tracking to > ensure > +that only packets for established connections, or those that the > configuration > +explicitly allows, can ingress a given VM or container. Neutron uses this > +feature by default. Most packets in an OpenStack environment pass > through it > +twice, once after egress from the packet's source VM and once before > ingress > +into its destination VM. Before OVN 2.8, the ``ovn-trace`` program, which > +shows the path of a packet through an OVN logical network, did not > support the > +logical firewall, which in practice made it almost useless for Neutron. > + > +In OVN 2.8, ``ovn-trace`` adds support for the logical firewall. By > default it > +assumes that packets are part of an established connection, which is > usually > +what the user wants as part of the trace. It also accepts command-line > options > +to override that assumption, which allows the user to discover the > treatment of > +packets that the firewall should drop. > + > +At the next level deeper, prior to Open vSwitch 2.8, the OpenFlow tracing > +command ``ofproto/trace`` also supported neither the connection tracking > +feature underlying the OVN distributed firewall nor the "recirculation" > feature > +that accompanied it. This meant that, even if the user tried to look > deeper > +into the distributed firewall mechanism, he or she would encounter a > further > +roadblock. Open vSwitch 2.8 added support for both of these features as > well. > + > +Summary Display > +~~~~~~~~~~~~~~~ > + > +``ovn-nbctl show`` and ``ovn-sbctl show``, for showing an overview of the > OVN > +configuration, didn't show a lot of important information. OVN adds some > more > +useful information here. > + > +DNS, and IPAM > +------------- > + > +OVN 2.8 adds a built-in DNS server designed for assigning names to VMs and > +containers within an OVN logical network. DNS names are assigned using > records > +in the OVN northbound database and, like other OVN features, translated > into > +logical flows at the OVN southbound layer. DNS requests directed to the > OVN > +DNS server never leave the hypervisor from which the request is sent; > instead, > +OVN processes and replies to the request from its ``ovn-controller`` local > +agent. The OVN DNS server is not a general-purpose DNS server and cannot > be > +used for that purpose. > + > +OVN includes simple built-in support for IP address management (IPAM), in > which > +OVN assigns IP addresses to VMs or containers from a pool or pools of IP > +addresses delegated to it by the administrator. Before OVN 2.8, OVN IPAM > only > +supported IPv4 addresses; OVN 2.8 adds support for IPv6. OVN 2.8 also > enhances > +the address pool support to allow specific addresses to be excluded. > Neutron > +assigns IP addresses itself and does not use OVN IPAM. > + > +High Availability > +----------------- > + > +As a distributed system, in OVN a lot can go wrong. As OVN advances, it > adds > +redundancy in places where currently a single failure could disrupt the > +functioning of the system as a whole. OVN 2.8 adds two new kinds of high > +availability. > + > +ovn-northd HA > +~~~~~~~~~~~~~ > + > +The ``ovn-northd`` program sits between the OVN northbound and southbound > +databases and translates from a logical network configuration into logical > +flows. If ``ovn-northd`` itself or the host on which it runs fails, then > +updates to the OVN northbound configuration will not propagate to the > +hypervisors and the OVN configuration freezes in place until > ``ovn-northd`` > +restarts. > + > +OVN 2.8 adds support for active-backup HA to ``ovn-northd``. When more > than > +one ``ovn-northd`` instance runs, it uses an OVSDB locking feature to > +automatically choose a single active instance. When that instance dies or > +becomes nonresponsive, the OVSDB server automatically choose one of the > +remaining instance(s) to take over. > + > +L3 Gateway HA > +~~~~~~~~~~~~~ > + > +In OVN 2.8, multiple chassis may now be specified for L3 gateways. When > more > +than one chassis is specified, OVN manages high availability for that > gateway. > +Each hypervisor uses the BFD protocol to keep track of the gateway nodes > that > +are currently up. At any given time, a hypervisor uses the > highest-priority > +gateway node that is currently up. > + > +OVSDB > +----- > + > +The OVN architecture relies heavily on OVSDB, the Open vSwitch database, > for > +hosting the northbound and southbound databases. OVSDB was originally > selected > +for this purpose because it was already used in Open vSwitch for > configuring > +OVS itself and, thus, it was well integrated with OVS and well supported > in C > +and Python, the two languages that are used in Open vSwitch. > + > +OVSDB was well designed for its original purpose of configuring Open > vSwitch. > +It supports ACID transactions, has a small, efficient server, a flexible > schema > +system, and good support for troubleshooting and debugging. However, it > lacked > +several features that are important for OVN but not for Open vSwitch. As > OVN > +advances, these missing features have become more and more of a problem. > One > +option would be to switch to a different database that already has many of > +these features, but despite a careful search, no ideal existing database > was > +identified, so the project chose instead to improve OVSDB where necessary > to > +bring it up to speed. The following sections talk more about recent and > future > +improvements. > + > +High Availability > +~~~~~~~~~~~~~~~~~ > + > +When ``ovsdb-server`` was only used for OVS configuration, high > availability > +was not important. ``ovsdb-server`` was capable of restarting itself > +automatically if it crashed, and if the whole system went down then Open > +vSwitch itself was dead too, so the database server's failure was not > +important. > + > +In contrast, the northbound and southbound databases are centralized > components > +of a distributed system, so it is important that they not be a single > point of > +failure for the system as a whole. In released versions of OVN, > +``ovsdb-server`` supports only "active-backup replication" across a pair > of > +servers. This means that if one server goes down, the other can pick it > back > +up approximately where the other one left off. The servers do not have > +built-in support for deciding at any given time which is the active and > which > +the backup, so the administrator must configure an external agent to do > this > +management. > + > +Active-backup replication is not entirely satisfactory, for multiple > reasons. > +Replication is only approximate. Configuring the external agent requires > extra > +work. There is no benefit from the backup server except when the active > server > +fails. At most two servers can be used. > + > +A new form of high availability for OVSDB is under development for the > OVN 2.9 > +release, based on the Raft algorithm for distributed consensus. Whereas > +replication uses two servers, clustering using Raft requires three or more > +(typically an odd number) and continues functioning as long as more than > half > +of the servers are up. The clustering implementation is built into > +``ovsdb-server`` and does not require an external agent. Clustering > preserves > +the ACID properties of the database, so that a transaction that commits is > +guaranteed to persist. Finally, reads (which are the bulk of the OVN > workload) > +scale with the size of the cluster, so that adding more servers should > improve > +performance as the number of hypervisors in an OVN deployment increases. > As of > +this writing, OVSDB support for clustering is undergoing development and > early > +deployment testing. > + > +RBAC security > +~~~~~~~~~~~~~ > + > +Until Open vSwitch 2.8, ``ovsdb-server`` had little support for access > control > +within a database. If an OVSDB client could modify the database at all, > it > +could make arbitrary changes. This was sufficient for most uses case to > that > +point. > + > +Hypervisors in an OVN deployment need access to the OVN southbound > database. > +Most of their access is reads, to find out about the OVN configuration. > +Hypervisors do need some write access to the southbound database, > primarily to > +let the other hypervisors know what VMs and containers they are running > and how > +to reach them. Thus, OVN gives all of the hypervisors in the OVN > deployment > +write access to the OVN southbound database. This is fine when all is > well, > +but if any of the hypervisors were compromised then they could disrupt the > +entire OVN deployment by corrupting the database. > + > +The OVN developers considered a few ways to solve this problem. One way > would > +be to introduce a new central service (perhaps in ``ovn-northd``) that > provided > +only the kinds of writes that the hypervisors legitimately need, and then > grant > +hypervisors direct access to the southbound database only for reads. But > +ultimately the developers decided to introduce a new form of more access > +control for OVSDB, called the OVSDB RBAC (role-based access control) > feature. > +OVSDB RBAC allows for granular enough control over access that > hypervisors can > +be granted only the ability to add, modify, and delete the records that > relate > +to themselves, preventing them from corrupting the database as a whole. > + > +Further Directions > +------------------ > + > +For more information about new features in OVN and Open vSwitch, please > refer > +to the NEWS file distributed with the source tree. If you have questions > about > +Open vSwitch or OVN features, please feel free to write to the Open > vSwitch > +discussion mailing list at ovs-disc...@openvswitch.org. > -- > 2.10.2 > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev