Guru and Russell, may I assume that you will review this? Thanks,
Ben. On Thu, Jan 11, 2018 at 05:36:36PM +0100, Timothy Redaelli wrote: > RHEL 6 is not supported anymore since it uses Python 2.6 and GCC 4.4.x, > but Open vSwitch needs, at least, Python 2.7 and GCC 4.6 to build correctly. > > http://docs.openvswitch.org/en/latest/intro/install/general/#build-requirements > > CC: Gurucharan Shetty <g...@ovn.org> > Signed-off-by: Timothy Redaelli <tredae...@redhat.com> > --- > > This is the same, rejected, patch I sent as RFC since I have, in the > meanwhile, sent another patchset (already merged) to add the requested > "force-reload-kmod" support on RHEL7 ("ovs-systemd-reload force-reload-kmod"). > > Documentation/automake.mk | 1 - > Documentation/howto/docker.rst | 2 +- > Documentation/index.rst | 1 - > Documentation/intro/install/index.rst | 1 - > Documentation/intro/install/rhel.rst | 238 ------------------------------ > rhel/.gitignore | 3 - > rhel/automake.mk | 11 -- > rhel/openvswitch-kmod-rhel6.spec.in | 78 ---------- > rhel/openvswitch-kmod.files | 3 - > rhel/openvswitch.spec.in | 267 > ---------------------------------- > 10 files changed, 1 insertion(+), 604 deletions(-) > delete mode 100644 Documentation/intro/install/rhel.rst > delete mode 100644 rhel/openvswitch-kmod-rhel6.spec.in > delete mode 100644 rhel/openvswitch-kmod.files > delete mode 100644 rhel/openvswitch.spec.in > > diff --git a/Documentation/automake.mk b/Documentation/automake.mk > index 2b202cb2a..e614b9de1 100644 > --- a/Documentation/automake.mk > +++ b/Documentation/automake.mk > @@ -18,7 +18,6 @@ DOC_SOURCE = \ > Documentation/intro/install/general.rst \ > Documentation/intro/install/netbsd.rst \ > Documentation/intro/install/ovn-upgrades.rst \ > - Documentation/intro/install/rhel.rst \ > Documentation/intro/install/userspace.rst \ > Documentation/intro/install/windows.rst \ > Documentation/intro/install/xenserver.rst \ > diff --git a/Documentation/howto/docker.rst b/Documentation/howto/docker.rst > index ff8b708af..c3d4dbf20 100644 > --- a/Documentation/howto/docker.rst > +++ b/Documentation/howto/docker.rst > @@ -296,7 +296,7 @@ The "underlay" mode > Depending on your VM, you can make the above step persistent across > reboots. > For example, if your VM is Debian/Ubuntu-based, read > `openvswitch-switch.README.Debian` found in `debian` folder. If your VM is > - RHEL-based, refer to :doc:`/intro/install/rhel`. > + Fedora/RHEL7/CentOS7-based, refer to :doc:`/intro/install/fedora`. > > 3. Start the Open vSwitch network driver > > diff --git a/Documentation/index.rst b/Documentation/index.rst > index ddffa3a62..dac14ba58 100644 > --- a/Documentation/index.rst > +++ b/Documentation/index.rst > @@ -86,7 +86,6 @@ Deeper Dive > - **Testing** :doc:`topics/testing` > > - **Packaging:** :doc:`intro/install/debian` | > - :doc:`intro/install/rhel` | > :doc:`intro/install/fedora` > > The Open vSwitch Project > diff --git a/Documentation/intro/install/index.rst > b/Documentation/intro/install/index.rst > index 3193c736c..626b49f12 100644 > --- a/Documentation/intro/install/index.rst > +++ b/Documentation/intro/install/index.rst > @@ -59,7 +59,6 @@ provided below. > distributions > debian > fedora > - rhel > > Upgrades > -------- > diff --git a/Documentation/intro/install/rhel.rst > b/Documentation/intro/install/rhel.rst > deleted file mode 100644 > index f8b26069f..000000000 > --- a/Documentation/intro/install/rhel.rst > +++ /dev/null > @@ -1,238 +0,0 @@ > -.. > - Licensed under the Apache License, Version 2.0 (the "License"); you may > - not use this file except in compliance with the License. You may obtain > - a copy of the License at > - > - http://www.apache.org/licenses/LICENSE-2.0 > - > - Unless required by applicable law or agreed to in writing, software > - distributed under the License is distributed on an "AS IS" BASIS, > WITHOUT > - WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See > the > - License for the specific language governing permissions and limitations > - under the License. > - > - Convention for heading levels in Open vSwitch documentation: > - > - ======= Heading 0 (reserved for the title in a document) > - ------- Heading 1 > - ~~~~~~~ Heading 2 > - +++++++ Heading 3 > - ''''''' Heading 4 > - > - Avoid deeper levels because they do not render well. > - > -======================================== > -RHEL 5.6, 6.x Packaging for Open vSwitch > -======================================== > - > -This document describes how to build and install Open vSwitch on a Red Hat > -Enterprise Linux (RHEL) host. If you want to install Open vSwitch on a > generic > -Linux host, refer to :doc:`general` instead. > - > -We have tested these instructions with RHEL 5.6 and RHEL 6.0. > - > -For RHEL 7.x (or derivatives, such as CentOS 7.x), you should follow the > -instructions in the :doc:`fedora`. The Fedora spec files are used for RHEL > -7.x. > - > -.. _rhel-prerequisites: > - > -Prerequisites > -------------- > - > -You may build from an Open vSwitch distribution tarball or from an Open > vSwitch > -Git tree. > - > -The default RPM build directory, ``_topdir``, has five directories in the > -top-level. > - > -BUILD/ > - where the software is unpacked and built > -RPMS/ > - where the newly created binary package files are written > -SOURCES/ > - contains the original sources, patches, and icon files > -SPECS/ > - contains the spec files for each package to be built > -SRPMS/ > - where the newly created source package files are written > - > -Before you begin, note the RPM sources directory on your version of RHEL. > The > -command ``rpmbuild --showrc`` will show the configuration for each of those > -directories. Alternatively, the command ``rpm --eval '%{_topdir}'`` shows the > -current configuration for the top level directory and the command ``rpm > --eval > -'%{_sourcedir}'`` does the same for the sources directory. On RHEL 5, the > -default RPM ``_topdir`` is ``/usr/src/redhat`` and the default RPM sources > -directory is ``/usr/src/redhat/SOURCES``. On RHEL 6, the default ``_topdir`` > is > -``$HOME/rpmbuild`` and the default RPM sources directory is > -``$HOME/rpmbuild/SOURCES``. > - > -Build Requirements > ------------------- > - > -You will need to install all required packages to build the RPMs. > -The command below will install RPM tools and generic build dependencies:: > - > - $ yum install @'Development Tools' rpm-build yum-utils > - > -Then it is necessary to install Open vSwitch specific build dependencies. > -The dependencies are listed in the SPEC file, but first it is necessary > -to replace the VERSION tag to be a valid SPEC. > - > -The command below will create a temporary SPEC file:: > - > - $ sed -e 's/@VERSION@/0.0.1/' rhel/openvswitch.spec.in > /tmp/ovs.spec > - > -And to install specific dependencies, use yum-builddep tool:: > - > - $ yum-builddep /tmp/ovs.spec > - > -Once that is completed, remove the file ``/tmp/ovs.spec``. > - > -If python-sphinx package is not available in your version of RHEL, you can > -install it via pip with 'pip install sphinx'. > - > -Open vSwitch requires python 2.7 or newer which is not available in older > -distributions. In the case of RHEL 6.x and its derivatives, one option is > -to install python34 and python34-six from `EPEL`_. > - > -.. _EPEL: https://fedoraproject.org/wiki/EPEL > - > -.. _rhel-bootstrapping: > - > -Bootstrapping and Configuring > ------------------------------ > - > -If you are building from a distribution tarball, skip to > :ref:`rhel-building`. > -If not, you must be building from an Open vSwitch Git tree. Determine what > -version of Autoconf is installed (e.g. run ``autoconf --version``). If it is > -not at least version 2.63, then you must upgrade or use another machine to > -build the packages. > - > -Assuming all requirements have been met, build the tarball by running:: > - > - $ ./boot.sh > - $ ./configure > - $ make dist > - > -You must run this on a machine that has the tools listed in > -:ref:`general-build-reqs` as prerequisites for building from a Git tree. > -Afterward, proceed with the rest of the instructions using the distribution > -tarball. > - > -Now you have a distribution tarball, named something like > -``openvswitch-x.y.z.tar.gz``. Copy this file into the RPM sources directory, > -e.g.:: > - > - $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES > - > -Broken ``build`` symlink > -~~~~~~~~~~~~~~~~~~~~~~~~ > - > -Some versions of the RHEL 6 kernel-devel package contain a broken ``build`` > -symlink. If you are using such a version, you must fix the problem before > -continuing. > - > -To find out whether you are affected, run:: > - > - $ cd /lib/modules/<version> > - $ ls -l build/ > - > -where ``<version>`` is the version number of the RHEL 6 kernel. > - > -.. note:: > - The trailing slash in the final command is important. Be sure to include > - it. > - > -If the ``ls`` command produces a directory listing, your kernel-devel package > -is OK. If it produces a ``No such file or directory`` error, your > kernel-devel > -package is buggy. > - > -If your kernel-devel package is buggy, then you can fix it with:: > - > - $ cd /lib/modules/<version> > - $ rm build > - $ ln -s /usr/src/kernels/<target> build > - > -where ``<target>`` is the name of an existing directory under > -``/usr/src/kernels``, whose name should be similar to ``<version>`` but may > -contain some extra parts. Once you have done this, verify the fix with the > -same procedure you used above to check for the problem. > - > -.. _rhel-building: > - > -Building > --------- > - > -You should have a distribution tarball named something like > -openvswitch-x.y.z.tar.gz. Copy this file into the RPM sources directory:: > - > - $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES > - > -Make another copy of the distribution tarball in a temporary directory. Then > -unpack the tarball and ``cd`` into its root:: > - > - $ tar xzf openvswitch-x.y.z.tar.gz > - $ cd openvswitch-x.y.z > - > -Userspace > -~~~~~~~~~ > - > -To build Open vSwitch userspace, run:: > - > - $ rpmbuild -bb rhel/openvswitch.spec > - > -This produces two RPMs: "openvswitch" and "openvswitch-debuginfo". > - > -The above command automatically runs the Open vSwitch unit tests. To disable > -the unit tests, run:: > - > - $ rpmbuild -bb --without check rhel/openvswitch.spec > - > -.. note:: > - If the build fails with ``configure: error: source dir > - /lib/modules/2.6.32-279.el6.x86_64/build doesn't exist`` or similar, then > - the kernel-devel package is missing or buggy. > - > -Kernel Module > -~~~~~~~~~~~~~ > - > -On RHEL 6, to build the Open vSwitch kernel module, copy > -rhel/openvswitch-kmod.files into the RPM sources directory and run:: > - > - $ rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec > - > -You might have to specify a kernel version and/or variants, e.g.: > - > - $ rpmbuild -bb \ > - -D "kversion 2.6.32-131.6.1.el6.x86_64" \ > - -D "kflavors default debug kdump" \ > - rhel/openvswitch-kmod-rhel6.spec > - > -This produces an "kmod-openvswitch" RPM for each kernel variant, in this > -example: "kmod-openvswitch", "kmod-openvswitch-debug", and > -"kmod-openvswitch-kdump". > - > -.. _rhel-script-integrations: > - > -Red Hat Network Scripts Integration > ------------------------------------ > - > -A RHEL host has default firewall rules that prevent any Open vSwitch tunnel > -traffic from passing through. If a user configures Open vSwitch tunnels like > -Geneve, GRE, VXLAN, LISP etc., they will either have to manually add iptables > -firewall rules to allow the tunnel traffic or add it through a startup script > -Refer to the "enable-protocol" command in the ovs-ctl(8) manpage for more > -information. > - > -In addition, simple integration with Red Hat network scripts has been > -implemented. Refer to `README.RHEL.rst`__ in the source tree or > -/usr/share/doc/openvswitch/README.RHEL.rst in the installed openvswitch > package > -for details. > - > -__ https://github.com/openvswitch/ovs/blob/master/rhel/README.RHEL.rst > - > -Reporting Bugs > --------------- > - > -Report problems to b...@openvswitch.org. > diff --git a/rhel/.gitignore b/rhel/.gitignore > index e584a1ed0..0fbcba69f 100644 > --- a/rhel/.gitignore > +++ b/rhel/.gitignore > @@ -1,7 +1,4 @@ > openvswitch-dkms.spec > -openvswitch-kmod-rhel5.spec > -openvswitch-kmod-rhel6.spec > openvswitch-kmod-fedora.spec > -openvswitch.spec > openvswitch-fedora.spec > usr_lib_systemd_system_ovs-vswitchd.service > diff --git a/rhel/automake.mk b/rhel/automake.mk > index 137ff4a39..e8abc0b65 100644 > --- a/rhel/automake.mk > +++ b/rhel/automake.mk > @@ -15,13 +15,8 @@ EXTRA_DIST += \ > rhel/etc_sysconfig_network-scripts_ifup-ovs \ > rhel/openvswitch-dkms.spec \ > rhel/openvswitch-dkms.spec.in \ > - rhel/openvswitch-kmod-rhel6.spec \ > - rhel/openvswitch-kmod-rhel6.spec.in \ > - rhel/openvswitch-kmod.files \ > rhel/openvswitch-kmod-fedora.spec \ > rhel/openvswitch-kmod-fedora.spec.in \ > - rhel/openvswitch.spec \ > - rhel/openvswitch.spec.in \ > rhel/openvswitch-fedora.spec \ > rhel/openvswitch-fedora.spec.in \ > rhel/usr_share_openvswitch_scripts_ovs-systemd-reload \ > @@ -48,15 +43,9 @@ update_rhel_spec = \ > $(srcdir)/rhel/openvswitch-dkms.spec: rhel/openvswitch-dkms.spec.in > $(top_builddir)/config.status > $(update_rhel_spec) > > -$(srcdir)/rhel/openvswitch-kmod-rhel6.spec: > rhel/openvswitch-kmod-rhel6.spec.in $(top_builddir)/config.status > - $(update_rhel_spec) > - > $(srcdir)/rhel/openvswitch-kmod-fedora.spec: > rhel/openvswitch-kmod-fedora.spec.in $(top_builddir)/config.status > $(update_rhel_spec) > > -$(srcdir)/rhel/openvswitch.spec: rhel/openvswitch.spec.in > $(top_builddir)/config.status > - $(update_rhel_spec) > - > $(srcdir)/rhel/openvswitch-fedora.spec: rhel/openvswitch-fedora.spec.in > $(top_builddir)/config.status > $(update_rhel_spec) > > diff --git a/rhel/openvswitch-kmod-rhel6.spec.in > b/rhel/openvswitch-kmod-rhel6.spec.in > deleted file mode 100644 > index 8413b254f..000000000 > --- a/rhel/openvswitch-kmod-rhel6.spec.in > +++ /dev/null > @@ -1,78 +0,0 @@ > -# Spec file for Open vSwitch kernel modules on Red Hat Enterprise > -# Linux 6. > - > -# Copyright (C) 2011, 2012 Nicira, Inc. > -# > -# Copying and distribution of this file, with or without modification, > -# are permitted in any medium without royalty provided the copyright > -# notice and this notice are preserved. This file is offered as-is, > -# without warranty of any kind. > - > -%define oname openvswitch > - > -Name: %{oname}-kmod > -Version: @VERSION@ > -Release: 1%{?dist} > -Summary: Open vSwitch kernel module > - > -Group: System/Kernel > -License: GPLv2 > -URL: http://openvswitch.org/ > -Source0: %{oname}-%{version}.tar.gz > -Source1: %{oname}-kmod.files > -BuildRoot: %(mktemp -ud > %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) > -BuildRequires: %kernel_module_package_buildreqs > - > -# Without this we get an empty openvswitch-debuginfo package (whose name > -# conflicts with the openvswitch-debuginfo package for OVS userspace). > -%undefine _enable_debug_packages > - > -# Use -D 'kversion 2.6.32-131.6.1.el6.x86_64' to build package > -# for specified kernel version. > -%{?kversion:%define kernel_version %kversion} > - > -# Use -D 'kflavors default debug kdump' to build packages for > -# specified kernel variants. > -%{!?kflavors:%define kflavors default} > - > -%kernel_module_package -n %{oname} -f %{SOURCE1} %kflavors > - > -%description > -Open vSwitch Linux kernel module. > - > -%prep > - > -%setup -n %{oname}-%{version} > - > -%build > -for flavor in %flavors_to_build; do > - mkdir _$flavor > - (cd _$flavor && ../configure --with-linux="%{kernel_source $flavor}") > - %{__make} -C _$flavor/datapath/linux %{?_smp_mflags} > -done > - > -%install > -export INSTALL_MOD_PATH=$RPM_BUILD_ROOT > -export INSTALL_MOD_DIR=extra/%{oname} > -for flavor in %flavors_to_build ; do > - make -C %{kernel_source $flavor} modules_install \ > - M="`pwd`"/_$flavor/datapath/linux > - > - # Cleanup unnecessary kernel-generated module dependency files. > - find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; > -done > -install -d %{buildroot}%{_sysconfdir}/depmod.d/ > -for module in > %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; > -do > - modname="$(basename ${module})" > - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf > - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf > -done > -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > - > -%files > -%defattr(644,root,root) > -/etc/depmod.d/%{oname}.conf > - > -%clean > -rm -rf $RPM_BUILD_ROOT > diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files > deleted file mode 100644 > index 357c2e8b7..000000000 > --- a/rhel/openvswitch-kmod.files > +++ /dev/null > @@ -1,3 +0,0 @@ > -%defattr(644,root,root,755) > -/lib/modules/%2-%1 > -/etc/depmod.d/openvswitch.conf > diff --git a/rhel/openvswitch.spec.in b/rhel/openvswitch.spec.in > deleted file mode 100644 > index e510d351b..000000000 > --- a/rhel/openvswitch.spec.in > +++ /dev/null > @@ -1,267 +0,0 @@ > -# Spec file for Open vSwitch on Red Hat Enterprise Linux. > - > -# Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Nicira, Inc. > -# > -# Copying and distribution of this file, with or without modification, > -# are permitted in any medium without royalty provided the copyright > -# notice and this notice are preserved. This file is offered as-is, > -# without warranty of any kind. > -# > -# If tests have to be skipped while building, specify the '--without check' > -# option. For example: > -# rpmbuild -bb --without check rhel/openvswitch.spec > -# > -# Support for executing kernel data path tests under rpmbuild is > -# provided, however this is intended for use only in test environments > -# and should not be used otherwise (these tests require root privileges). > -# These tests can be executed, for example, via: > -# rpmbuild -rb --with check_datapath_kernel openvswitch.src.rpm > -# > -# These tests will use the currently installed OVS kernel modules, when > -# testing out of tree kernel modules the appropriate openvswitch-kmod > -# package should be installed first. > - > -Name: openvswitch > -Summary: Open vSwitch daemon/database/utilities > -Group: System Environment/Daemons > -URL: http://www.openvswitch.org/ > -Vendor: Nicira, Inc. > -Version: @VERSION@ > - > -License: ASL 2.0 > -Release: 1 > -Source: openvswitch-%{version}.tar.gz > -Buildroot: /tmp/openvswitch-rpm > -Requires: logrotate, hostname, python >= 2.7, python-six > -BuildRequires: python-six > -BuildRequires: openssl-devel > -BuildRequires: checkpolicy, selinux-policy-devel > - > -%bcond_without check > -%bcond_with check_datapath_kernel > - > -%description > -Open vSwitch provides standard network bridging functions and > -support for the OpenFlow protocol for remote per-flow control of > -traffic. > - > -%package devel > -Summary: Open vSwitch development package > -Group: Development/Libraries > - > -%description devel > -This package provides openvswitch headers and libopenvswitch for developers. > - > -%package selinux-policy > -Summary: Open vSwitch SELinux policy > -License: ASL 2.0 > -BuildArch: noarch > -Requires: selinux-policy-targeted > - > -%description selinux-policy > -Tailored Open vSwitch SELinux policy > - > -%prep > -%setup -q > - > -%build > -./configure --prefix=/usr --sysconfdir=/etc > --localstatedir=%{_localstatedir} \ > - --libdir=%{_libdir} --enable-ssl --enable-shared > -make %{_smp_mflags} > -make selinux/openvswitch-custom.te > -cd selinux > -make -f %{_datadir}/selinux/devel/Makefile > - > -%install > -rm -rf $RPM_BUILD_ROOT > -make install DESTDIR=$RPM_BUILD_ROOT > - > -rhel_cp() { > - base=$1 > - mode=$2 > - dst=$RPM_BUILD_ROOT/$(echo $base | sed 's,_,/,g') > - install -D -m $mode rhel/$base $dst > -} > -rhel_cp etc_init.d_openvswitch 0755 > -rhel_cp etc_logrotate.d_openvswitch 0644 > -rhel_cp etc_sysconfig_network-scripts_ifup-ovs 0755 > -rhel_cp etc_sysconfig_network-scripts_ifdown-ovs 0755 > -rhel_cp usr_share_openvswitch_scripts_sysconfig.template 0644 > - > -install -p -m 644 -D selinux/openvswitch-custom.pp \ > - $RPM_BUILD_ROOT%{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp > - > -# Get rid of stuff we don't want to make RPM happy. > -rm \ > - $RPM_BUILD_ROOT/usr/bin/ovs-testcontroller \ > - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-testcontroller.8 \ > - $RPM_BUILD_ROOT/usr/bin/ovs-test \ > - $RPM_BUILD_ROOT/usr/bin/ovs-l3ping \ > - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-test.8 \ > - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-l3ping.8 \ > - $RPM_BUILD_ROOT/usr/sbin/ovs-vlan-bug-workaround \ > - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-vlan-bug-workaround.8 \ > - $RPM_BUILD_ROOT/usr/bin/ovn-* \ > - $RPM_BUILD_ROOT/usr/share/man/man?/ovn-* \ > - $RPM_BUILD_ROOT/usr/share/openvswitch/ovn-* \ > - $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/ovn* > -(cd "$RPM_BUILD_ROOT" && rm -rf usr/%{_lib}/*.la) > -(cd "$RPM_BUILD_ROOT" && rm -rf usr/include) > - > -install -d -m 0755 $RPM_BUILD_ROOT%{_rundir}/openvswitch > -install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/log/openvswitch > -install -d -m 0755 $RPM_BUILD_ROOT/var/lib/openvswitch > - > -copy_headers() { > - src=$1 > - dst=$RPM_BUILD_ROOT/$2 > - install -d -m 0755 $dst > - install -m 0644 $src/*.h $dst > -} > -copy_headers include %{_includedir}/openvswitch > -copy_headers include/openflow %{_includedir}/openvswitch/openflow > -copy_headers include/openvswitch %{_includedir}/openvswitch/openvswitch > -copy_headers include/sparse %{_includedir}/openvswitch/sparse > -copy_headers include/sparse/arpa %{_includedir}/openvswitch/sparse/arpa > -copy_headers include/sparse/netinet %{_includedir}/openvswitch/sparse/netinet > -copy_headers include/sparse/sys %{_includedir}/openvswitch/sparse/sys > -copy_headers lib %{_includedir}/openvswitch/lib > - > -install -D -m 0644 lib/.libs/libopenvswitch.a \ > - $RPM_BUILD_ROOT/%{_libdir}/libopenvswitch.a > - > -%check > -%if %{with check} > - if make check TESTSUITEFLAGS='%{_smp_mflags}' RECHECK=yes; then :; > - else > - cat tests/testsuite.log > - exit 1 > - fi > -%endif > -%if %{with check_datapath_kernel} > - if make check-kernel RECHECK=yes; then :; > - else > - cat tests/system-kmod-testsuite.log > - exit 1 > - fi > -%endif > - > -%clean > -rm -rf $RPM_BUILD_ROOT > - > -%post > -# Create default or update existing /etc/sysconfig/openvswitch. > -SYSCONFIG=/etc/sysconfig/openvswitch > -TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template > -if [ ! -e $SYSCONFIG ]; then > - cp $TEMPLATE $SYSCONFIG > -else > - for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE) > - do > - if ! grep $var $SYSCONFIG >/dev/null 2>&1; then > - echo >> $SYSCONFIG > - sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG > - fi > - done > -fi > - > -# Ensure all required services are set to run > -/sbin/chkconfig --add openvswitch > -/sbin/chkconfig openvswitch on > - > -%post selinux-policy > -/usr/sbin/semodule -i > %{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp &> /dev/null || : > - > -%preun > -if [ "$1" = "0" ]; then # $1 = 0 for uninstall > - /sbin/service openvswitch stop > - /sbin/chkconfig --del openvswitch > -fi > - > -%postun > -if [ "$1" = "0" ]; then # $1 = 0 for uninstall > - rm -f /etc/openvswitch/conf.db > - rm -f /etc/sysconfig/openvswitch > - rm -f /etc/openvswitch/vswitchd.cacert > -fi > - > -%postun selinux-policy > -if [ $1 -eq 0 ] ; then > - /usr/sbin/semodule -r openvswitch-custom &> /dev/null || : > -fi > - > -exit 0 > - > -%files > -%defattr(-,root,root) > -%dir /etc/openvswitch > -/etc/bash_completion.d/ovs-appctl-bashcomp.bash > -/etc/bash_completion.d/ovs-vsctl-bashcomp.bash > -/etc/init.d/openvswitch > -%config(noreplace) /etc/logrotate.d/openvswitch > -/etc/sysconfig/network-scripts/ifup-ovs > -/etc/sysconfig/network-scripts/ifdown-ovs > -/usr/bin/ovs-appctl > -/usr/bin/ovs-dpctl > -/usr/bin/ovs-dpctl-top > -/usr/bin/ovs-docker > -/usr/bin/ovs-ofctl > -/usr/bin/ovs-parse-backtrace > -/usr/bin/ovs-pcap > -/usr/bin/ovs-pki > -/usr/bin/ovs-tcpdump > -/usr/bin/ovs-tcpundump > -/usr/bin/ovs-vlan-test > -/usr/bin/ovs-vsctl > -/usr/bin/ovsdb-client > -/usr/bin/ovsdb-tool > -/usr/bin/vtep-ctl > -%{_libdir}/lib*.so.* > -/usr/sbin/ovs-bugtool > -/usr/sbin/ovs-vswitchd > -/usr/sbin/ovsdb-server > -/usr/share/man/man1/ovs-pcap.1.gz > -/usr/share/man/man1/ovs-tcpundump.1.gz > -/usr/share/man/man1/ovsdb-client.1.gz > -/usr/share/man/man1/ovsdb-server.1.gz > -/usr/share/man/man1/ovsdb-tool.1.gz > -/usr/share/man/man5/ovs-vswitchd.conf.db.5.gz > -/usr/share/man/man5/vtep.5.gz > -/usr/share/man/man7/ovs-fields.7.gz > -/usr/share/man/man8/ovs-appctl.8.gz > -/usr/share/man/man8/ovs-bugtool.8.gz > -/usr/share/man/man8/ovs-ctl.8.gz > -/usr/share/man/man8/ovs-dpctl.8.gz > -/usr/share/man/man8/ovs-dpctl-top.8.gz > -/usr/share/man/man8/ovs-ofctl.8.gz > -/usr/share/man/man8/ovs-parse-backtrace.8.gz > -/usr/share/man/man8/ovs-pki.8.gz > -/usr/share/man/man8/ovs-tcpdump.8.gz > -/usr/share/man/man8/ovs-vlan-test.8.gz > -/usr/share/man/man8/ovs-vsctl.8.gz > -/usr/share/man/man8/ovs-vswitchd.8.gz > -/usr/share/man/man8/vtep-ctl.8.gz > -/usr/share/openvswitch/bugtool-plugins/ > -/usr/share/openvswitch/python/ > -/usr/share/openvswitch/scripts/ovs-bugtool-* > -/usr/share/openvswitch/scripts/ovs-check-dead-ifs > -/usr/share/openvswitch/scripts/ovs-ctl > -/usr/share/openvswitch/scripts/ovs-lib > -/usr/share/openvswitch/scripts/ovs-save > -/usr/share/openvswitch/scripts/ovs-vtep > -/usr/share/openvswitch/scripts/sysconfig.template > -/usr/share/openvswitch/vswitch.ovsschema > -/usr/share/openvswitch/vtep.ovsschema > -%doc COPYING NOTICE README.rst NEWS rhel/README.RHEL.rst > -/var/lib/openvswitch > -/var/log/openvswitch > - > -%files devel > -%{_libdir}/lib*.so > -%{_libdir}/lib*.a > -%{_libdir}/pkgconfig > -%{_includedir}/openvswitch/* > - > -%files selinux-policy > -%defattr(-,root,root) > -%{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp > -- > 2.14.3 > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev