Thanks for checking. I applied both patches to branch-2.9. For branch-2.8, would you mind submitting the fixed-up patches? It would save me a few minutes.
Thanks, Ben. On Fri, Apr 06, 2018 at 05:37:20PM +0000, Jan Scheurich wrote: > Yes that fix should be applied to branches 2.9 and 2.8. > > I checked that it applies and passes all unit tests pass. > > On branch-2.8 the patch for nsh.at patch must be slightly retrofitted as the > datapath action names changed from encap_nsh/decap_nsh to push_nsh/pop_nsh > and the nsh_ttl field was introduced in 2.9. > > diff --git a/tests/nsh.at b/tests/nsh.at > index 6ae71b5..6eb4637 100644 > --- a/tests/nsh.at > +++ b/tests/nsh.at > @@ -351,7 +351,7 @@ bridge("br0") > > Final flow: unchanged > Megaflow: recirc_id=0,eth,ip,in_port=1,dl_dst=66:77:88:99:aa:bb,nw_frag=no > -Datapath actions: > push_nsh(flags=0,ttl=63,mdtype=1,np=3,spi=0x1234,si=255,c1=0x1122334 > +Datapath actions: > encap_nsh(flags=0,mdtype=1,np=3,spi=0x1234,si=255,c1=0x11223344,c2=0 > ]) > > AT_CHECK([ > @@ -370,7 +370,7 @@ bridge("br0") > > Final flow: > recirc_id=0x1,eth,in_port=4,vlan_tci=0x0000,dl_src=00:00:00:00:00:00,dl_ds > Megaflow: > recirc_id=0x1,packet_type=(1,0x894f),in_port=4,nsh_mdtype=1,nsh_np=3,nsh_spi > -Datapath actions: pop_nsh(),recirc(0x2) > +Datapath actions: decap_nsh(),recirc(0x2) > ]) > > AT_CHECK([ > @@ -407,8 +407,8 @@ ovs-appctl time/warp 1000 > AT_CHECK([ > ovs-appctl dpctl/dump-flows dummy@ovs-dummy | strip_used | grep -v ipv6 > | sort > ], [0], [flow-dump from non-dpdk interfaces: > -recirc_id(0),in_port(1),packet_type(ns=0,id=0),eth(dst=1e:2c:e9:2a:66:9e),eth_type(0x0 > -recirc_id(0x3),in_port(1),packet_type(ns=1,id=0x894f),nsh(mdtype=1,np=3,spi=0x1234,c1= > +recirc_id(0),in_port(1),packet_type(ns=0,id=0),eth(dst=1e:2c:e9:2a:66:9e),eth_type(0x0 > +recirc_id(0x3),in_port(1),packet_type(ns=1,id=0x894f),nsh(mdtype=1,np=3,spi=0x1234,c1= > > recirc_id(0x4),in_port(1),packet_type(ns=0,id=0),eth_type(0x0800),ipv4(frag=no), > packe > ]) > > Thanks, Jan > > > -----Original Message----- > > From: Ben Pfaff [mailto:b...@ovn.org] > > Sent: Friday, 06 April, 2018 18:36 > > To: Jan Scheurich <jan.scheur...@ericsson.com> > > Cc: d...@openvswitch.org; yi.y.y...@intel.com > > Subject: Re: [PATCH v2 0/2] Correct handling of double encap and decap > > actions > > > > On Fri, Apr 06, 2018 at 09:35:48AM -0700, Ben Pfaff wrote: > > > On Thu, Apr 05, 2018 at 04:11:02PM +0200, Jan Scheurich wrote: > > > > Recent tests with NSH encap have shown that the translation of multiple > > > > subsequent encap() or decap() actions was incorrect. This patch set > > > > corrects the handling and adds a unit test for NSH to cover two NSH > > > > and one Ethernet encapsulation levels. > > > > > > Thanks. Should this be applied to branch-2.9? > > > > To be clear, I applied it to master just now. _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev