> -----Original Message----- > From: Stephen Finucane [mailto:step...@that.guru] > Sent: Monday, April 16, 2018 3:30 PM > To: d...@openvswitch.org > Cc: Stokes, Ian <ian.sto...@intel.com>; Stephen Finucane > <step...@that.guru> > Subject: [PATCH v2 7/9] doc: Move "pdump" guide to its own document > > Yet another section that's far too detailed for someone getting started > with DPDK in OVS. Split it out. > > Signed-off-by: Stephen Finucane <step...@that.guru> > --- > Documentation/howto/dpdk.rst | 39 ---------------------- > Documentation/topics/dpdk/index.rst | 1 + > Documentation/topics/dpdk/pdump.rst | 65 > +++++++++++++++++++++++++++++++++++++ > 3 files changed, 66 insertions(+), 39 deletions(-) create mode 100644 > Documentation/topics/dpdk/pdump.rst > > diff --git a/Documentation/howto/dpdk.rst b/Documentation/howto/dpdk.rst > index b3cba19b2..1a0fb6df1 100644 > --- a/Documentation/howto/dpdk.rst > +++ b/Documentation/howto/dpdk.rst > @@ -85,45 +85,6 @@ To stop ovs-vswitchd & delete bridge, run:: > $ ovs-appctl -t ovsdb-server exit > $ ovs-vsctl del-br br0 > > -pdump > ------ > - > -pdump allows you to listen on DPDK ports and view the traffic that is > passing -on them. To use this utility, one must have libpcap installed on > the system. > -Furthermore, DPDK must be built with ``CONFIG_RTE_LIBRTE_PDUMP=y`` and - > ``CONFIG_RTE_LIBRTE_PMD_PCAP=y``. > - > -.. warning:: > - A performance decrease is expected when using a monitoring application > like > - the DPDK pdump app. > - > -To use pdump, simply launch OVS as usual, then navigate to the > ``app/pdump`` -directory in DPDK, ``make`` the application and run like > so:: > - > - $ sudo ./build/app/dpdk-pdump -- \ > - --pdump port=0,queue=0,rx-dev=/tmp/pkts.pcap \ > - --server-socket-path=/usr/local/var/run/openvswitch > - > -The above command captures traffic received on queue 0 of port 0 and > stores it -in ``/tmp/pkts.pcap``. Other combinations of port numbers, > queues numbers and -pcap locations are of course also available to use. > For example, to capture all -packets that traverse port 0 in a single pcap > file:: > - > - $ sudo ./build/app/dpdk-pdump -- \ > - --pdump 'port=0,queue=*,rx-dev=/tmp/pkts.pcap,tx- > dev=/tmp/pkts.pcap' \ > - --server-socket-path=/usr/local/var/run/openvswitch > - > -``server-socket-path`` must be set to the value of ``ovs_rundir()`` which > -typically resolves to ``/usr/local/var/run/openvswitch``. > - > -Many tools are available to view the contents of the pcap file. Once > example is -tcpdump. Issue the following command to view the contents of > ``pkts.pcap``:: > - > - $ tcpdump -r pkts.pcap > - > -More information on the pdump app and its usage can be found in the `DPDK > docs -<http://dpdk.org/doc/guides/tools/pdump.html>`__. > - > Jumbo Frames > ------------ > > diff --git a/Documentation/topics/dpdk/index.rst > b/Documentation/topics/dpdk/index.rst > index fd7cf38b5..d083d929e 100644 > --- a/Documentation/topics/dpdk/index.rst > +++ b/Documentation/topics/dpdk/index.rst > @@ -38,3 +38,4 @@ The DPDK Datapath > /topics/dpdk/vdev > /topics/dpdk/pmd > /topics/dpdk/qos > + /topics/dpdk/pdump > diff --git a/Documentation/topics/dpdk/pdump.rst > b/Documentation/topics/dpdk/pdump.rst > new file mode 100644 > index 000000000..f1a408989 > --- /dev/null > +++ b/Documentation/topics/dpdk/pdump.rst
Compilation error, pdump.rst not listed in Documentation/automake.mk. > @@ -0,0 +1,65 @@ > +.. > + Licensed under the Apache License, Version 2.0 (the "License"); you > may > + not use this file except in compliance with the License. You may > obtain > + a copy of the License at > + > + http://www.apache.org/licenses/LICENSE-2.0 > + > + Unless required by applicable law or agreed to in writing, software > + distributed under the License is distributed on an "AS IS" BASIS, > WITHOUT > + WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. > See the > + License for the specific language governing permissions and > limitations > + under the License. > + > + Convention for heading levels in Open vSwitch documentation: > + > + ======= Heading 0 (reserved for the title in a document) > + ------- Heading 1 > + ~~~~~~~ Heading 2 > + +++++++ Heading 3 > + ''''''' Heading 4 > + > + Avoid deeper levels because they do not render well. > + > +===== > +pdump > +===== > + > +pdump allows you to listen on DPDK ports and view the traffic that is > +passing on them. To use this utility, one must have libpcap installed on > the system. > +Furthermore, DPDK must be built with ``CONFIG_RTE_LIBRTE_PDUMP=y`` and > +``CONFIG_RTE_LIBRTE_PMD_PCAP=y``. > + This was introduced in OVS 2.6. Although it's doubtful that someone may be using 2.5 now it could be worth a version change tag to call it out. Ian > +.. warning:: > + > + A performance decrease is expected when using a monitoring application > like > + the DPDK pdump app. > + > +To use pdump, simply launch OVS as usual, then navigate to the > +``app/pdump`` directory in DPDK, ``make`` the application and run like > so:: > + > + $ sudo ./build/app/dpdk-pdump -- \ > + --pdump port=0,queue=0,rx-dev=/tmp/pkts.pcap \ > + --server-socket-path=/usr/local/var/run/openvswitch > + > +The above command captures traffic received on queue 0 of port 0 and > +stores it in ``/tmp/pkts.pcap``. Other combinations of port numbers, > +queues numbers and pcap locations are of course also available to use. > +For example, to capture all packets that traverse port 0 in a single pcap > file:: > + > + $ sudo ./build/app/dpdk-pdump -- \ > + --pdump 'port=0,queue=*,rx-dev=/tmp/pkts.pcap,tx- > dev=/tmp/pkts.pcap' \ > + --server-socket-path=/usr/local/var/run/openvswitch > + > +``server-socket-path`` must be set to the value of ``ovs_rundir()`` > +which typically resolves to ``/usr/local/var/run/openvswitch``. > + > +Many tools are available to view the contents of the pcap file. Once > +example is tcpdump. Issue the following command to view the contents of > ``pkts.pcap``:: > + > + $ tcpdump -r pkts.pcap > + > +More information on the pdump app and its usage can be found in the > +`DPDK documentation`__. > + > +__ http://dpdk.org/doc/guides/tools/pdump.html > -- > 2.14.3 _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev