Hi Ilya, Just trying to figure out how much the CPU processing cycles are being used using the "dpif-netdev/pmd-stats-show" command and what I am seeing that when I start the test idle is 100% and then processing cycles just keep increasing as long as I keep running the test, I was hoping it to stabilize at some point but it does not. Is there any other way to find out how much CPU is being utilized for the test.
Also, I am seeing drop and errs in PHY-to-PHY, coming ixia --dpdk128<-ovs+dpdk-> dpdk129 -- ixia, just trying to understand whats going on with this. I do have about 8K IP lookups, the actions is go to the other port with mod_dl_dst of the next_hop. OFPST_PORT reply (xid=0x2): 3 ports port 129: rx pkts=28188204935, bytes=3337048521914, drop=0, errs=5381086, frame=?, over=?, crc=? tx pkts=28251930544, bytes=3340826046788, drop=*52764491*, errs=0, coll=? port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0 tx pkts=0, bytes=0, drop=0, errs=0, coll=0 port 128: rx pkts=28305064186, bytes=3344059379368, drop=0, errs= *21967104*, frame=?, over=?, crc=? tx pkts=28188542419, bytes=3337022565678, drop=*32176*, errs=0, coll=? Thanks, Shahaji _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev